Bending and compression tests for PA 2200 parts obtained using Selective Laser Sintering method
MATEC Web Conf., 94 (2017) 03010
Published online: 2017-01-04
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Compressive properties of bidirectionally graded lattice structures
Jianxing Yang, Xiaohong Chen, Yuanxi Sun, et al.Materials & Design 218 110683 (2022)
https://doi.org/10.1016/j.matdes.2022.110683
Mechanical and permeability properties of porous scaffolds developed by a Voronoi tessellation for bone tissue engineering
Ze Zhao, Junchao Li, Dingrou Yao and Yuan WeiJournal of Materials Chemistry B 10 (46) 9699 (2022)
https://doi.org/10.1039/D2TB01478E
Flatwise to Upright Build Orientations under Three-Point Bending Test of Nylon 12 (PA12) Additively Manufactured by SLS
Marius Nicolae BabaPolymers 14 (5) 1026 (2022)
https://doi.org/10.3390/polym14051026
Strength Properties of the Heat-Resistant Inconel 718 Superalloy Additively Manufactured by Direct Laser Deposition Method under Shock Compression
Andrey S. Savinykh, Gennady V. Garkushin, Sergey V. Razorenov, Svetlana A. Atroshenko, Olga G. Klimova-Korsmik and Nikita G. KislovMetals 12 (6) 967 (2022)
https://doi.org/10.3390/met12060967
Parameter identification of a second-gradient model for the description of pantographic structures in dynamic regime
Navid Shekarchizadeh, Marco Laudato, Luca Manzari, et al.Zeitschrift für angewandte Mathematik und Physik 72 (6) (2021)
https://doi.org/10.1007/s00033-021-01620-9
A Review on Additive Manufacturing of Micromixing Devices
Marina Garcia-Cardosa, Francisco-Javier Granados-Ortiz and Joaquín Ortega-CasanovaMicromachines 13 (1) 73 (2021)
https://doi.org/10.3390/mi13010073
Emerging trend in manufacturing of 3D biomedical components using selective laser sintering: A review
Pankaj Kumar, Gazanfar Mustafa Ali syed, S. Tummala, et al.E3S Web of Conferences 184 01047 (2020)
https://doi.org/10.1051/e3sconf/202018401047
Mode I Fracture Toughness of Polyamide and Alumide Samples obtained by Selective Laser Sintering Additive Process
Dan Ioan Stoia, Liviu Marsavina and Emanoil LinulPolymers 12 (3) 640 (2020)
https://doi.org/10.3390/polym12030640
Influence of Manufacturing Parameters on Mechanical Properties of Porous Materials by Selective Laser Sintering
Dan Ioan Stoia, Emanoil Linul and Liviu MarsavinaMaterials 12 (6) 871 (2019)
https://doi.org/10.3390/ma12060871