Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Investigations of Surface Topography of Hot Working Tool Steel Manufactured with the Use of 3D Print

Pawel Grobelny, Lukasz Furmanski, Stanislaw Legutko

MATEC Web Conf., 137 (2017) 02004

Published online: 2017-11-22

DOI: https://doi.org/10.1051/matecconf/201713702004

This article has been cited by the following article(s):

The Influence of the Steam Sterilization Process on Selected Properties of Polymer Samples Produced in MEX and JMT Processes

Małgorzata Zaborniak, Janusz Kluczyński, Jakub Stańko and Tomasz Ślęzak
Materials 17 (23) 5763 (2024)
https://doi.org/10.3390/ma17235763

Geometry, Structure and Surface Quality of a Maraging Steel Milling Cutter Printed by Direct Metal Laser Melting

Michal Skrzyniarz, Lukasz Nowakowski and Slawomir Blasiak
Materials 15 (3) 773 (2022)
https://doi.org/10.3390/ma15030773

Investigation of the Interface between Laser-Melted CoCr and a Stainless Steel Substrate

Cosmin Cosma, Christina Teusan, Peter Gogola, Mihaela Simion, Zuzana Gabalcova, Adrian Trif, Petru Berce and Nicolae Balc
Metals 12 (6) 965 (2022)
https://doi.org/10.3390/met12060965

The Level of the Additive Manufacturing Technology Use in Polish Metal and Automotive Manufacturing Enterprises

Justyna Patalas-Maliszewska, Marcin Topczak and Sławomir Kłos
Applied Sciences 10 (3) 735 (2020)
https://doi.org/10.3390/app10030735

Ioan Turcin, Ali Abdallah, Manfred Pauritsch, Cosmin Cosma and Nicolae Balc
592 138 (2020)
https://doi.org/10.1007/978-3-030-57997-5_17

Three-Dimensional Reconstruction Method for Machined Surface Topography Based on Gray Gradient Constraints

Wei-Chao Shi, Jian-Ming Zheng, Yan Li and Xu-Bo Li
Applied Sciences 9 (3) 591 (2019)
https://doi.org/10.3390/app9030591

Comparison of selected surface topography parameters after the turning of Inconel 625 obtained by the additive techniques to the parameters of the material made by the traditional techniques

Grobelny Pawel, Legutko Stanislaw and Lukasz Furmanski
Archives of Mechanical Technology and Materials 38 (1) 75 (2018)
https://doi.org/10.2478/amtm-2018-0013