Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

An experimental study on the dimensional accuracy of holes made by abrasive waterjet machining of Hardox steels

Alexandru Catalin Filip, Laurentiu Aurel Mihail, Mircea Anton Vasiloni

MATEC Web Conf., 137 (2017) 02003

Published online: 2017-11-22

DOI: https://doi.org/10.1051/matecconf/201713702003

This article has been cited by the following article(s):

Artificial Intelligence Model Used for Optimizing Abrasive Water Jet Machining Parameters to Minimize Delamination in Carbon Fiber-Reinforced Polymer

Ioan Alexandru Popan, Vlad I. Bocăneț, Selver Softic, Alina Ioana Popan, Nicolae Panc and Nicolae Balc
Applied Sciences 14 (18) 8512 (2024)
https://doi.org/10.3390/app14188512

Hardox 500 Çeliğinin Delinmesinde Minimum Miktarda Yağlama Yönteminin Yüzey Pürüzlülüğü ve Kesme Sıcaklığına Olan Etkisinin İncelenmesi

Aybars Mahmat
International Journal of Pure and Applied Sciences 10 (2) 407 (2024)
https://doi.org/10.29132/ijpas.1518879

Researches on the geometrical and dimensional accuracy for complex thin parts made of electrical steel by abrasive waterjet machining

Laurenţiu-Aurel Mihail, Alexandru Filip and Adrian Mija
IOP Conference Series: Materials Science and Engineering 1268 (1) 012008 (2022)
https://doi.org/10.1088/1757-899X/1268/1/012008

Assessment of the Influence of Selected Technological Parameters on the Morphology Parameters of the Cutting Surfaces of the Hardox 500 Material Cut by Abrasive Water Jet Technology

Tibor Krenicky, Stefania Olejarova and Milos Servatka
Materials 15 (4) 1381 (2022)
https://doi.org/10.3390/ma15041381

Water Jet Technology: Experimental Verification of the Input Factors Variation Influence on the Generated Vibration Levels and Frequency Spectra

Stefania Olejarova and Tibor Krenicky
Materials 14 (15) 4281 (2021)
https://doi.org/10.3390/ma14154281

Abrasive Water Jet Cutting of Hardox Steels—Quality Investigation

Tibor Krenicky, Milos Servatka, Stefan Gaspar and Jozef Mascenik
Processes 8 (12) 1652 (2020)
https://doi.org/10.3390/pr8121652

Advances in Manufacturing Engineering and Materials

Ioan Alexandru Popan, Vlad Bocanet, Nicolae Balc and Alina Ioan Popan
Lecture Notes in Mechanical Engineering, Advances in Manufacturing Engineering and Materials 105 (2019)
https://doi.org/10.1007/978-3-319-99353-9_12