Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Investigation on standoff distance influence on kerf characteristics in abrasive water jet cutting of composite materials

Ioan Alexandru POPAN, Glad CONTIU, Ian CAMPBELL

MATEC Web Conf., 137 (2017) 01009

Published online: 2017-11-22

DOI: https://doi.org/10.1051/matecconf/201713701009

This article has been cited by the following article(s):

Erosion in the contact periphery in the initiation zone due to erosion of abrasive water jet

Chiara Ravasio, Simone Conconi, Daniel Stehle, Frank Pude, Jakub Poloprudský, Filip Šiška, Alice Chlupová and Sergej Hloch
The International Journal of Advanced Manufacturing Technology 136 (7-8) 3641 (2025)
https://doi.org/10.1007/s00170-025-15074-0

Monitoring Equipment Malfunctions in Composite Material Machining: Acoustic Emission-Based Approach for Abrasive Waterjet Cutting

Ioan Alexandru Popan, Cosmin Cosma, Alina Ioana Popan, Vlad I. Bocăneț and Nicolae Bâlc
Applied Sciences 14 (11) 4901 (2024)
https://doi.org/10.3390/app14114901

Evaluation of Geometric Defects Produced in Abrasive Water Jet Drilling of Steel S275JR

Alejandro Sambruno, Francisco Javier Puerta-Morales, Juan Antonio Barba-Egea and Fermín Bañón-García
Key Engineering Materials 955 121 (2023)
https://doi.org/10.4028/p-La6Gfm

Correction of Shape Error at Cut-In and Cut-Out Points in Abrasive Waterjet Cutting of Carbon Fiber Reinforced Polymer (CFRP)

Ioan Alexandru Popan, Cosmin Cosma, Alina Ioana Popan, Nicolae Panc, Daniel Filip and Nicolae Balc
Machines 11 (8) 800 (2023)
https://doi.org/10.3390/machines11080800

Mechanical and Industrial Engineering

Jinyang Xu and J. Paulo Davim
Materials Forming, Machining and Tribology, Mechanical and Industrial Engineering 161 (2022)
https://doi.org/10.1007/978-3-030-90487-6_6

A Review on the Abrasive Water-Jet Machining of Metal–Carbon Fiber Hybrid Materials

Fermin Bañon, Alejandro Sambruno, Leandro González-Rovira, Juan Manuel Vazquez-Martinez and Jorge Salguero
Metals 11 (1) 164 (2021)
https://doi.org/10.3390/met11010164

Advances in Water Jetting

Dominika Lehocká, Jiří Klich, Vladimír Simkulet, et al.
Lecture Notes in Mechanical Engineering, Advances in Water Jetting 126 (2021)
https://doi.org/10.1007/978-3-030-53491-2_14

Kerf Taper Defect Minimization Based on Abrasive Waterjet Machining of Low Thickness Thermoplastic Carbon Fiber Composites C/TPU

Alejandro Sambruno, Fermin Bañon, Jorge Salguero, Bartolome Simonet and Moises Batista
Materials 12 (24) 4192 (2019)
https://doi.org/10.3390/ma12244192

Advances in Manufacturing II

Dominika Lehocka, Jiri Klich, Jan Pitel, et al.
Lecture Notes in Mechanical Engineering, Advances in Manufacturing II 233 (2019)
https://doi.org/10.1007/978-3-030-16943-5_21

Advances in Manufacturing Engineering and Materials

Ioan Alexandru Popan, Vlad Bocanet, Nicolae Balc and Alina Ioan Popan
Lecture Notes in Mechanical Engineering, Advances in Manufacturing Engineering and Materials 105 (2019)
https://doi.org/10.1007/978-3-319-99353-9_12

Study on milling strategies influence on the quality characteristics in case of composite material

Vasile Ceclan, Alexandru Popan, Sorin Grozav, et al.
MATEC Web of Conferences 299 04012 (2019)
https://doi.org/10.1051/matecconf/201929904012

Comparison of ultrasonically enhanced pulsating water jet erosion efficiency on mechanical surface treatment on the surface of aluminum alloy and stainless steel

Dominika Lehocka, Jiri Klich, Frantisek Botko, et al.
The International Journal of Advanced Manufacturing Technology 103 (5-8) 1647 (2019)
https://doi.org/10.1007/s00170-019-03680-8