EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 136 (2017) 01006 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Experimental study on the mechanism of cold plasma assisted micro-milling of titanium, molybdenum, and nickel

Xin Liu, Yuheng Li, Boxi Chen, Shuaishuai Wang, Yuyang Zhou, Zhenjing Duan, Ziheng Wang, Yang Chen, Yonghui Zhang, Huanxi Zheng and Jiyu Liu
Surfaces and Interfaces 60 105997 (2025)
https://doi.org/10.1016/j.surfin.2025.105997

Research on the design and cutting performance of a novel BTA boring tool intended for machining of nickel-based superalloys

Rui Zhang, Zhiqiang Liang, Linfeng Yi, Junhua Hu, Yuchao Du, Lin Guo, Yue Ma, Rongbin Cai, Qiang Zhao and Lingda Xiong
Journal of Materials Research and Technology 36 7980 (2025)
https://doi.org/10.1016/j.jmrt.2025.05.022

Surface and subsurface response to the in-situ laser assistance in ultra-precision diamond turning of SiCp/Al composites

Yuhan Li, Hanheng Du, Wai Sze Yip, Cheung tong Cheng, Yan Zhou, Jieqiong Lin and Suet To
Journal of Materials Research and Technology 30 7160 (2024)
https://doi.org/10.1016/j.jmrt.2024.05.092

In situ laser-assisted diamond turning of Ni-P alloy coating on mold core surface

Guangfeng Shi, Ming Yu, Yi Hu, Guoquan Shi, Xuewen Sun, Dong Yao and Hongbing Lv
The International Journal of Advanced Manufacturing Technology 134 (5-6) 2563 (2024)
https://doi.org/10.1007/s00170-024-14246-8

Cutting performance evaluation of modified dielectrics in nano powder mixed electric discharge machining (NPMEDM) of Ni-based super alloy

Kashif Ishfaq and Muhammad Umair Waseem
CIRP Journal of Manufacturing Science and Technology 41 196 (2023)
https://doi.org/10.1016/j.cirpj.2022.11.018

Conventional and laser-assisted machining of laser-borided Monel 400 alloy

Mateusz Kukliński, Damian Przestacki, Aneta Bartkowska, Piotr Kieruj and Norbert Radek
The International Journal of Advanced Manufacturing Technology 126 (11-12) 5677 (2023)
https://doi.org/10.1007/s00170-023-11477-z

Research status and development trend of cutting surface integrity of aerospace alloy materials

Jie Liu, Guangjun Chen, Lixiang Zhao, Zhiwei Yu and Xiongfei Jia
The International Journal of Advanced Manufacturing Technology 127 (1-2) 45 (2023)
https://doi.org/10.1007/s00170-023-11558-z

On the Influence of Binder Material in PCBN Cutting Tools for Turning Operations of Inconel 718

Francisco Matos, Tiago E. F. Silva, Vitor F. C. Sousa, et al.
Metals 13 (5) 934 (2023)
https://doi.org/10.3390/met13050934

Developments in tandem micro-machining processes to mitigate the machining issues at micron level: a systematic review, challenges and future opportunities

Sahil Sharma, Tarlochan Singh and Akshay Dvivedi
Machining Science and Technology 26 (4) 515 (2022)
https://doi.org/10.1080/10910344.2022.2129991

Advances in Manufacturing III

Kristina Berladir, Justyna Trojanowska, Vitalii Ivanov and Ivan Pavlenko
Lecture Notes in Mechanical Engineering, Advances in Manufacturing III 72 (2022)
https://doi.org/10.1007/978-3-031-00218-2_7

Performance analysis and application on Ti-6Al-4V of micro-forging system

Yufei GUI, Qi LIU, Yun ZHU, Sulin CHEN and Bin SHEN
Chinese Journal of Aeronautics 34 (6) 188 (2021)
https://doi.org/10.1016/j.cja.2020.09.008

Estimation of Minimum Uncut Chip Thickness during Precision and Micro-Machining Processes of Various Materials—A Critical Review

Szymon Wojciechowski
Materials 15 (1) 59 (2021)
https://doi.org/10.3390/ma15010059

Microstructural and Mechanical Properties of B-Cr Coatings Formed on 145Cr6 Tool Steel by Laser Remelting of Diffusion Borochromized Layer Using Diode Laser

Aneta Bartkowska, Dariusz Bartkowski, Damian Przestacki, Jakub Hajkowski and Andrzej Miklaszewski
Coatings 11 (5) 608 (2021)
https://doi.org/10.3390/coatings11050608

Thermo-mechanical aspects of cutting forces and tool wear in the laser-assisted turning of Ti-6Al-4V titanium alloy using AlTiN coated cutting tools

Witold Habrat, Krzysztof Krupa, Angelos P. Markopoulos and Nikolaos E. Karkalos
The International Journal of Advanced Manufacturing Technology 115 (3) 759 (2021)
https://doi.org/10.1007/s00170-020-06132-w

A study on the process efficiency of laser-assisted machining investigating energy consumption

Won-Jung Oh and Choon-Man Lee
The International Journal of Advanced Manufacturing Technology 113 (3-4) 867 (2021)
https://doi.org/10.1007/s00170-021-06651-0

Characteristics of Cr-B Coatings Produced on Vanadis® 6 Tool Steel Using Laser Processing

Aneta Bartkowska
Materials 14 (10) 2621 (2021)
https://doi.org/10.3390/ma14102621

Cutting Forces during Inconel 718 Orthogonal Turn-Milling

Agata Felusiak-Czyryca, Marek Madajewski, Paweł Twardowski and Martyna Wiciak-Pikuła
Materials 14 (20) 6152 (2021)
https://doi.org/10.3390/ma14206152

A review on applications of artificial intelligence in modeling and optimization of laser beam machining

Ali Naderi Bakhtiyari, Zhiwen Wang, Liyong Wang and Hongyu Zheng
Optics & Laser Technology 135 106721 (2021)
https://doi.org/10.1016/j.optlastec.2020.106721

Energy absorption of cast metal and composite foams tested in extremely low and high-temperatures

Paweł Kaczyński, Mariusz Ptak and Katarzyna Gawdzińska
Materials & Design 196 109114 (2020)
https://doi.org/10.1016/j.matdes.2020.109114

Characterization of W–Cr Metal Matrix Composite Coatings Reinforced with WC Particles Produced on Low-Carbon Steel Using Laser Processing of Precoat

Dariusz Bartkowski, Aneta Bartkowska, Paweł Popielarski, Jakub Hajkowski and Adam Piasecki
Materials 13 (22) 5272 (2020)
https://doi.org/10.3390/ma13225272

Production and Properties of FeB-Fe2B-Fe3(B,C) Surface Layers Formed on Tool Steel Using Combination of Diffusion and Laser Processing

Aneta Bartkowska
Coatings 10 (11) 1130 (2020)
https://doi.org/10.3390/coatings10111130

Laser Alloying Monel 400 with Amorphous Boron to Obtain Hard Coatings

Mateusz Kuklinski, Aneta Bartkowska and Damian Przestacki
Materials 12 (21) 3494 (2019)
https://doi.org/10.3390/ma12213494

Advances in Manufacturing Engineering and Materials

Witold Habrat, Krzysztof Krupa, Piotr Laskowski and Jan Sieniawski
Lecture Notes in Mechanical Engineering, Advances in Manufacturing Engineering and Materials 237 (2019)
https://doi.org/10.1007/978-3-319-99353-9_26

Experimental Investigation of Productivity, Specific Energy Consumption, and Hole Quality in Single-Pulse, Percussion, and Trepanning Drilling of IN 718 Superalloy

Shoaib Sarfraz, Essam Shehab, Konstantinos Salonitis and Wojciech Suder
Energies 12 (24) 4610 (2019)
https://doi.org/10.3390/en12244610

Controlling the material removal and roughness of Inconel 718 in laser machining

Naveed Ahmed, Madiha Rafaqat, Salman Pervaiz, et al.
Materials and Manufacturing Processes 34 (10) 1169 (2019)
https://doi.org/10.1080/10426914.2019.1615082

Microstructure and selected properties of Monel 400 alloy after laser heat treatment and laser boriding using diode laser

Mateusz Kukliński, Aneta Bartkowska and Damian Przestacki
The International Journal of Advanced Manufacturing Technology 98 (9-12) 3005 (2018)
https://doi.org/10.1007/s00170-018-2343-9

Experimental Investigation and Performance Analysis of Ceramic Inserts in Laser Assisted Turning of Waspaloy

Martyna Wiciak, Tadeusz Chwalczuk, Agata Felusiak and R. Das
MATEC Web of Conferences 237 01003 (2018)
https://doi.org/10.1051/matecconf/201823701003