Non-destructive test of steel structures by conical indentation
MATEC Web Conf., 129 (2017) 02046
Published online: 2017-11-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Improving the Energy Efficiency of Vehicles by Ensuring the Optimal Value of Excess Pressure in the Cabin Depending on the Travel Speed
Ivan Panfilov, Alexey N. Beskopylny and Besarion MeskhiFluids 9 (6) 130 (2024)
https://doi.org/10.3390/fluids9060130
Simulation of Ball-rod Hardening of a Butt Welded Joint of Transport Bearing Structures
Alexey Beskopylny, Besarion Meskhi, Andrey Veremeenko, Alexandr Isaev and Elena KadomtsevaTransportation Research Procedia 54 84 (2021)
https://doi.org/10.1016/j.trpro.2021.02.050
Analysis of neural network results based on experimental data during indentation
N Babushkina, A Lyapin, A Kovaleva, et al.E3S Web of Conferences 224 01018 (2020)
https://doi.org/10.1051/e3sconf/202022401018
Spectral characteristics of noise during hardening of welds of rod structures
Alexey Beskopylny, Besik Meskhi, Alexander Chukarin and Alexandr IsaevIOP Conference Series: Materials Science and Engineering 709 (4) 044087 (2020)
https://doi.org/10.1088/1757-899X/709/4/044087
Artificial Neural Networks in Classification of Steel Grades Based on Non-Destructive Tests
Alexey Beskopylny, Alexandr Lyapin, Hubert Anysz, Besarion Meskhi, Andrey Veremeenko and Andrey MozgovoyMaterials 13 (11) 2445 (2020)
https://doi.org/10.3390/ma13112445
VIII International Scientific Siberian Transport Forum
Alexey Beskopylny, Besarion Meskhi, Nikolay Onishkov and Victor KorotkinAdvances in Intelligent Systems and Computing, VIII International Scientific Siberian Transport Forum 1115 904 (2020)
https://doi.org/10.1007/978-3-030-37916-2_89
Diagnostics of steel structures with the dynamic non-destructive method
Alexey Beskopylny, Andrey Veremeenko, Alexander Shilov, et al.MATEC Web of Conferences 279 02003 (2019)
https://doi.org/10.1051/matecconf/201927902003
Stress-strain state of a reinforced stepped bimodular column
Alexey Beskopylny, Elena Kadomtseva, Grigory Strelnikov and Yaroslav ShabanovIOP Conference Series: Materials Science and Engineering 661 (1) 012030 (2019)
https://doi.org/10.1088/1757-899X/661/1/012030
The non-stationary dynamic of a beam under the elastic-plastic impact of a conical indenter
Alexey Beskopylny, Andrey Veremeenko, Elena Kadomtseva, et al.MATEC Web of Conferences 279 02006 (2019)
https://doi.org/10.1051/matecconf/201927902006
Effect of Bimodularity on the Stress State of a Variable Cross-Section Reinforced Beam
Aleksey N. Beskopylny, Elena Kadomtseva, Vadim Poltavskii and Mikhail LukianenkoMaterials Science Forum 974 646 (2019)
https://doi.org/10.4028/www.scientific.net/MSF.974.646
An Improvement of Quality of the Rear Cover of Bearing Turbine with the use of Selected Methods
Andrzej Pacana and Dominika SiwiecQuality Production Improvement - QPI 1 (1) 456 (2019)
https://doi.org/10.2478/cqpi-2019-0062
2201 060012 (2019)
https://doi.org/10.1063/1.5139656
Experience non-destructive testing of the metal of bridge structures
A N Beskopylny, N L Vernezi, A A Veremeenko and R M ArakelyanIOP Conference Series: Materials Science and Engineering 698 (6) 066001 (2019)
https://doi.org/10.1088/1757-899X/698/6/066001
The Impact of the Conical Indenter on a Plate Laying on a Winkler Foundation
Aleksey N. Beskopylny, Andrey A. Veremeenko, Elena E. Kadomtseva and Natalia I. BeskopylnaiaMaterials Science Forum 931 84 (2018)
https://doi.org/10.4028/www.scientific.net/MSF.931.84
Bending of a wavy plate of a periodic profile on an elastic foundation
Alexey Beskopylny, Elena Kadomtseva and Grigory StrelnikovIOP Conference Series: Materials Science and Engineering 365 042032 (2018)
https://doi.org/10.1088/1757-899X/365/4/042032
Model of heterogeneous reinforced fiber foam concrete in bending
Alexey Beskopylny, Elena Kadomtseva, Grigory Strelnikov, et al.IOP Conference Series: Materials Science and Engineering 365 032023 (2018)
https://doi.org/10.1088/1757-899X/365/3/032023
Bending strength assessment of chemically-heat-strengthened Novikov gearing
Alexey Beskopylny, Nikolay Onishkov, Victor Korotkin, et al.MATEC Web of Conferences 224 02033 (2018)
https://doi.org/10.1051/matecconf/201822402033
Dynamic response of a plate laying on elastic base during the impact of a conical indenter
Alexey Beskopylny, Andrey Veremeenko, Elena Kadomtseva, et al.MATEC Web of Conferences 196 01001 (2018)
https://doi.org/10.1051/matecconf/201819601001
Agricultural machine parts quality control by dynamic non-destructive methods
Alexey N. Beskopylny, Viktor B. Rykov, Elena M. Zubrilina, et al.MATEC Web of Conferences 226 04034 (2018)
https://doi.org/10.1051/matecconf/201822604034
Static analysis of a reinforced bimodulus beam on elastic foundation
Alexey Beskopylny, Elena Kadomtseva, Grigory Strelnikov, et al.MATEC Web of Conferences 196 02003 (2018)
https://doi.org/10.1051/matecconf/201819602003
Buckling analysis of rod structure of the two-tier dome
Alexey Beskopylny, Alexander Zhuravlev, Alexander Shilov, A. Mottaeva and B. MelovićMATEC Web of Conferences 193 04024 (2018)
https://doi.org/10.1051/matecconf/201819304024
The Boundary Condition Influence on a Stress-Strain State of a Corrugated Plate on an Elastic Foundation
Aleksey N. Beskopylny, Elena E. Kadomtseva and Grigory P. StrelnikovMaterials Science Forum 931 60 (2018)
https://doi.org/10.4028/www.scientific.net/MSF.931.60