Forecasting the surface roughness of the workpiece in the round external grinding
MATEC Web Conf., 129 (2017) 01080
Published online: 2017-11-07
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
High-quality diamond grinding of products made of materials of increased hardness
Fedir NovikovIOP Conference Series: Earth and Environmental Science 1491 (1) 012031 (2025)
https://doi.org/10.1088/1755-1315/1491/1/012031
Research on calculation of grinding surface roughness
Van Nga Tran Thi, Khanh Nguyen Lam and Cuong Nguyen VanEUREKA: Physics and Engineering (1) 85 (2022)
https://doi.org/10.21303/2461-4262.2022.001832
Advances in Engineering Research and Application
Do Duc Trung, Nhu Tung Nguyen, Hoang Tien Dung, et al.Lecture Notes in Networks and Systems, Advances in Engineering Research and Application 178 102 (2021)
https://doi.org/10.1007/978-3-030-64719-3_13
Theoretical-Probability Model for Calculating Roofness in Magnetic Abrasive Machining
Alexey Ikonnikov, Sergey Leonov, S. Bratan and S. RoshchupkinMATEC Web of Conferences 346 01045 (2021)
https://doi.org/10.1051/matecconf/202134601045
Building a model of the process of grinding screws for ball-screw transmission
Vladimir Bogutsky, Leonid Shron and Yury NovosyolovIOP Conference Series: Materials Science and Engineering 971 (2) 022087 (2020)
https://doi.org/10.1088/1757-899X/971/2/022087
Evaluation of the effect of changing the geometry of the abrasive grains of the grinding wheel on the characteristics of the roughness of the grinded surface
Vladimir Bogutsky, Leonid Shron and Elmar YagyaevIOP Conference Series: Materials Science and Engineering 709 (4) 044117 (2020)
https://doi.org/10.1088/1757-899X/709/4/044117
Theoretical-Probability Model of Metal Removal During Magnetic-Abrasive Treatment
Alexey Ikonnikov, Sergey Leonov, S. Vöth, et al.MATEC Web of Conferences 297 09007 (2019)
https://doi.org/10.1051/matecconf/201929709007
Deviation from flatness of surfaces after combined peripheral grinding
Vladimir G. Gusev, Alexey V. Morozov, S. Bratan, et al.MATEC Web of Conferences 224 01028 (2018)
https://doi.org/10.1051/matecconf/201822401028