Cyber physical systems in mechatronic research centre
MATEC Web Conf., 126 (2017) 01006
Published online: 2017-10-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
358 (2022)
https://doi.org/10.1109/TCSET55632.2022.9766850
Design of a Digital Twin Training Centre for an Industrial Robot Arm
Timotei István Erdei, Rudolf Krakó and Géza HusiApplied Sciences 12 (17) 8862 (2022)
https://doi.org/10.3390/app12178862
Reconstruction of a Grinding Machine Intended for Thermo-Polymers, and Design of a Linux Based Iot Control System
Attila Debreceni, Timotei István Erdei, Szabolcs Tóth and Géza HusiMűszaki Tudományos Közlemények 13 (1) 45 (2020)
https://doi.org/10.33894/mtk-2020.13.05
Singularity measurement in the Cyber-physical and intelligent robot systems laboratory
Timotei István Erdei and Géza HusiInternational Review of Applied Sciences and Engineering 11 (2) 82 (2020)
https://doi.org/10.1556/1848.2020.20001
Design of an IoT Smart Meteorological Station Complete with Data Acquisition and Realizing Test Measurements in Cyber-Physical Robotics Lab
István Faragó, Timotei István Erdei, Sándor Zolnai and Géza HusiMűszaki Tudományos Közlemények 13 (1) 54 (2020)
https://doi.org/10.33894/mtk-2020.13.07
Design of Electron Tube and Semiconductor-Based and Voltage Stabilised Amplifier Circuits
István Hrámcov, Timotei István Erdei, Roland Décsei and Géza HusiMűszaki Tudományos Közlemények 13 (1) 81 (2020)
https://doi.org/10.33894/mtk-2020.13.13
Development and Testing of the Pneumatic and Output System of the FANUC Spider Robot
Gyula Korsoveczki, Géza Husi and Timotei István ErdeiMűszaki Tudományos Közlemények 11 (1) 121 (2019)
https://doi.org/10.33894/mtk-2019.11.26
Reconstruction, Adapter Design and Application of a Nokia Puma 560 Robot's Gripper on a Robot Cell Integrated KUKA KR5 Industrial Robot
Gábor Vona, Antal Apagyi, Timotei István Erdei and Géza HusiMűszaki Tudományos Közlemények 11 (1) 183 (2019)
https://doi.org/10.33894/mtk-2019.11.41
Designing a delta tripod based robot fused deposition modelling 3 dimensional printer using an open-source Arduino development platform
Tamás Templom, Timotei István Erdei, Zsolt Molnár, et al.MATEC Web of Conferences 184 02013 (2018)
https://doi.org/10.1051/matecconf/201818402013