Study of the Formability of Laminated Lightweight Metallic Materials
MATEC Web Conf., 121 (2017) 03008
Published online: 2017-08-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Incremental Sheet Forming on Tailored Hybrid Steel/Polymer/Steel Sandwich Materials; Formability and Residual Stress Investigation
Somayeh Khani, Mohamed Harhash, Heinz Palkowski and Johannes BuhlJOM (2025)
https://doi.org/10.1007/s11837-025-07486-w
Forming challenges of small and complex fiber metal laminate parts in aerospace applications—a review
Hamza Blala, Lihui Lang, Shahrukh Khan, et al.The International Journal of Advanced Manufacturing Technology 126 (5-6) 2509 (2023)
https://doi.org/10.1007/s00170-023-11247-x
Advances on Incremental forming of composite materials
G. Hussain, Malik Hassan, Hongyu Wei, J. Buhl, Maohua Xiao, Asif Iqbal, Hamza Qayyum, Asim Ahmed Riaz, Riaz Muhammad and Kostya (Ken) OstrikovAlexandria Engineering Journal 79 308 (2023)
https://doi.org/10.1016/j.aej.2023.07.045
New Advances and Future Possibilities in Forming Technology of Hybrid Metal–Polymer Composites Used in Aerospace Applications
Tomasz Trzepieciński, Sherwan Mohammed Najm, Manel Sbayti, Hedi Belhadjsalah, Marcin Szpunar and Hirpa G. LemuJournal of Composites Science 5 (8) 217 (2021)
https://doi.org/10.3390/jcs5080217
Analysis of the eigenfrequencies of the basalt machine parts by the FEM
Ilie Octavian Popp, N.F. Cofaru and M. InţăMATEC Web of Conferences 343 08002 (2021)
https://doi.org/10.1051/matecconf/202134308002
Industrial processes efficiency and lower energy consumption initiatives through advanced retrofitting in the wood industry
R D Păltan, C Biriș and L A M RădulescuIOP Conference Series: Materials Science and Engineering 564 (1) 012096 (2019)
https://doi.org/10.1088/1757-899X/564/1/012096
Monitoring the technological processes in the wood industry in order to make them more efficient through technical overhauling
Radu Dan Paltan, Cristina Biriş, Loredana Anne-Marie Rădulescu, et al.MATEC Web of Conferences 290 02007 (2019)
https://doi.org/10.1051/matecconf/201929002007
Study about Mechanical Properties of Materials Obtained by Thermoforming
Cristina Maria Biris and Mihaela OleksikMaterials Science Forum 957 389 (2019)
https://doi.org/10.4028/www.scientific.net/MSF.957.389