The effect of drilling parameters for surface roughness in drilling of AA7075 alloy
MATEC Web Conf., 112 (2017) 01018
Published online: 2017-07-03
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
345 (2026)
https://doi.org/10.1016/B978-0-443-23705-8.00015-3
(2025)
https://doi.org/10.21203/rs.3.rs-5791600/v1
Eco-friendly drilling of AA 5052-H32 Alloy: influence of jasmine-based cutting fluid on surface quality and burr Formation
Muhammad Yasir, Mubashir Gulzar, Muhammad Saad Khan, Alexis Mounge Nanimina, Imtiaz Ali and Shahid IqbalInternational Journal of Sustainable Engineering 18 (1) (2025)
https://doi.org/10.1080/19397038.2025.2538863
Multi-objective optimisation of drilling process variables of LM5 alloy using grey relational analysis
Sunder Jebarose Juliyana, Jayavelu Udaya Prakash, Charles Sarala Rubi, Sachin Salunkhe, Robert Cep and Emad Abouel NasrDiscover Mechanical Engineering 4 (1) (2025)
https://doi.org/10.1007/s44245-025-00148-w
Analysis of dry and cryogenic drilling on hole quality in AA2024-T6 using HSS and HSS-Co tools
Atif Sikander, Barkat Ullah, Muhammad Shoaib Naseem, Hassan Raza Channar and Muhammad AslamJournal of King Saud University – Engineering Sciences 37 (4) (2025)
https://doi.org/10.1007/s44444-025-00018-6
Improving and Predicting the Surface Roughness and the Machining Accuracy in Ultrasonic Vibration-Assisted Milling
Mohamed Baraya, Jiwang Yan and Mohab HossamJournal of Vibration Engineering & Technologies 12 (S1) 127 (2024)
https://doi.org/10.1007/s42417-024-01406-z
Effect of Silicon on Machinability in AlSi6, AlSi12 and AlSi18 Alloys
Berkay Geçgel, Yusuf Altıntaş, Muhammet Yasir Arslan, Okan Özcan Çelen, Engin Kocaman, Oğuz Koçar and Uğur KöklüSilicon 16 (4) 1467 (2024)
https://doi.org/10.1007/s12633-023-02760-5
Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel
Mehmet Akif Erden, Uğur Köklü, Ahmet Serdar Güldibi and Muhammed ElitaşMaterials Testing 66 (1) 100 (2024)
https://doi.org/10.1515/mt-2023-0175
Comparative study of deep drilling in the Ti-6Al-4 V ELI titanium alloy using standard and high-feed rate
Waslley Amaral Coelho, Robson Bruno Dutra Pereira, Carlos Henrique Lauro, Lincoln Cardoso Brandão and João Paulo DavimThe International Journal of Advanced Manufacturing Technology 126 (9-10) 4157 (2023)
https://doi.org/10.1007/s00170-023-11351-y
An Effectiveness in Manufacturing Quality on Surface Roughness and Built-Up Edge in Drilling Operation towards Aircraft Component
Mohd Rasidi Ibrahim, Aishah Ahmad, Azrin Ibrahim, Noor Azah Samsudin, Mohammad Sukri Mustapa, Kai Cheng and Bin Hong ChongMaterials Science Forum 1110 67 (2023)
https://doi.org/10.4028/p-V74xyF
Optimization of drilling processes of aluminium metal matrix composites using the robust ordinal priority approach
Santonab Chakraborty, Rakesh D. Raut, T.M. Rofin and Shankar ChakrabortyDecision Analytics Journal 7 100258 (2023)
https://doi.org/10.1016/j.dajour.2023.100258
Investigation of Thrust Force, Drill Bit Temperature and Burr Height in the Drilling of Aluminum Alloy Used in Ammunition Wing Drive Systems
H. Gökçe and M. A. BiberciExperimental Techniques 46 (4) 691 (2022)
https://doi.org/10.1007/s40799-021-00501-0
Assessment of Machinability in Aluminium Alloys Using the COPRAS Method
J Arivudainambi and P MuthusamyDesign, Modelling and Fabrication of Advanced Robots 1 (2) 108 (2022)
https://doi.org/10.46632/dmfar/1/2/8
Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications
Aishah Najiah Dahnel, Mohamad Noor Ikhwan Naiman, Muhammad Azim Mirza Mohd Farid, Ahmad Faris Abdul Rahman and Nur Munirah Meera MydinAluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications (2022)
https://doi.org/10.5772/intechopen.102864
Comparison of coated and uncoated HSS drill bit on surface roughness, material removal rate and dimensional accuracy of SS410 stainless steel
V. Vignesh, Sandeep Satish, Vivek Gopi, J. Jishnoop and Gokul A. MenonMaterials Today: Proceedings 58 13 (2022)
https://doi.org/10.1016/j.matpr.2021.12.307
Fabrication, Characterization, and Machining of Polypropylene/Wood Flour Composites
Yasir Qayyum Gill, Umer Abid, Muhammad Shafiq Irfan, et al.Arabian Journal for Science and Engineering 47 (5) 5973 (2022)
https://doi.org/10.1007/s13369-021-05768-4
Effect of cutting parameters on thrust force, torque, hole quality and dust generation during drilling of GLARE 2B laminates
Imed Boughdiri, Khaled Giasin, Tarek Mabrouki and Redouane ZitouneComposite Structures 261 113562 (2021)
https://doi.org/10.1016/j.compstruct.2021.113562
Analysis of Hole Quality and Chips Formation in the Dry Drilling Process of Al7075-T6
Numan Habib, Aamer Sharif, Aqib Hussain, Muhammad Aamir, Khaled Giasin, Danil Yurievich Pimenov and Umair AliMetals 11 (6) 891 (2021)
https://doi.org/10.3390/met11060891
Assessments of Process Parameters on Cutting Force and Surface Roughness during Drilling of AA7075/TiB2 In Situ Composite
S. Parasuraman, I. Elamvazuthi, G. Kanagaraj, Elango Natarajan and A. PugazhenthiMaterials 14 (7) 1726 (2021)
https://doi.org/10.3390/ma14071726
A review: drilling performance and hole quality of aluminium alloys for aerospace applications
Muhammad Aamir, Khaled Giasin, Majid Tolouei-Rad and Ana VafadarJournal of Materials Research and Technology 9 (6) 12484 (2020)
https://doi.org/10.1016/j.jmrt.2020.09.003
Thrust force modelling and surface roughness optimization in drilling of AA-7075: FEM and GRA
Nafiz YaşarJournal of Mechanical Science and Technology 33 (10) 4771 (2019)
https://doi.org/10.1007/s12206-019-0918-5
CFRP/Al-7075 istifli delmede matkap uç açılarının delinebilirlik üzerine etkisi
Erman AYDIN and Muammer NALBANTGazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 35 (2) 917 (2019)
https://doi.org/10.17341/gazimmfd.548419
Multi-objective optimization of green technology thermal drilling process using grey-fuzzy logic method
R. Kumar, N. Rajesh Jesudoss Hynes, Catalin Iulian Pruncu and J. Angela Jennifa SujanaJournal of Cleaner Production 236 117711 (2019)
https://doi.org/10.1016/j.jclepro.2019.117711