Finite Element Analysis of hot Single Point Incremental forming of hip prostheses
MATEC Web Conf., 80 (2016) 14006
Published online: 2016-10-24
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Layer-by-layer manufacturing of titanium plate: fabrication, microstructure, mechanical, and numerical prediction of tensile test
Dhinakaran Veeman, Mohan Kumar Subramaniyan, Vijayaragavan Elumalai and Sarankumar ThanigainathanJournal of Adhesion Science and Technology 1 (2025)
https://doi.org/10.1080/01694243.2025.2503242
Finite element analysis and experimental investigation in incremental sheet metal forming of composite matrix of Grade-V titanium
Gianender Kajal, M. R. Tyagi and Gulshan KumarInternational Journal on Interactive Design and Manufacturing (IJIDeM) 19 (6) 4041 (2025)
https://doi.org/10.1007/s12008-024-01992-y
Investigation using single point incremental forming (SPIF) to fabricate patient-specific, titanium orbital floor implants
Elizabeth M. Mamros, Lauren E. Blaha, Christian A. Kauffman, P.A.F. Martins, A.D. Santos and M.C. OliveiraMATEC Web of Conferences 408 01038 (2025)
https://doi.org/10.1051/matecconf/202540801038
Advanced FEM Insights into Pressure-Assisted Warm Single-Point Incremental Forming of Ti-6Al-4V Titanium Alloy Sheet Metal
Tomasz Trzepieciński, Marcin Szpunar, Robert Ostrowski, Waldemar Ziaja and Maciej MotykaMetals 14 (6) 619 (2024)
https://doi.org/10.3390/met14060619
Current Trends in Metallic Materials for Body Panels and Structural Members Used in the Automotive Industry
Tomasz Trzepieciński and Sherwan Mohammed NajmMaterials 17 (3) 590 (2024)
https://doi.org/10.3390/ma17030590
493 (2023)
https://doi.org/10.1007/978-981-99-3033-3_42
Effect of Particle and Substrate Pre-heating on the Oxide Layer and Material Jet Formation in Solid-State Spray Deposition: A Numerical Study
P. Khamsepour, C. Moreau and A. DolatabadiJournal of Thermal Spray Technology 32 (4) 1153 (2023)
https://doi.org/10.1007/s11666-022-01509-7
Additive manufacturing and characterization of titanium wall used in nuclear application
Dhinakaran Veeman, Mohan Kumar Subramaniyan, Raman Kumar, Gokulakrishnan Sriram, Micheal Agnelo Browne, Lei Guo and Siva Shanmugam NallathambhiProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237 (8) 1814 (2023)
https://doi.org/10.1177/14644207231157578
Split-Plot I-Optimal Design Optimisation of Combined Oil-Based and Friction Stir Rotation-Assisted Heating in SPIF of Ti-6Al-4V Titanium Alloy Sheet under Variable Oil Pressure
Tomasz Trzepieciński, Marcin Szpunar and Robert OstrowskiMetals 12 (1) 113 (2022)
https://doi.org/10.3390/met12010113
Gas Tungsten arc welding of Ti-6Al-4V sheet for pressure vessels used in aerospace application: A detailed characterization of weldment
Mohan Kumar Subramaniyan, Dhinakaran Veeman, Siva Shanmugam Nallathambhi and Sarankumar ThanigainathanInternational Journal of Pressure Vessels and Piping 200 104787 (2022)
https://doi.org/10.1016/j.ijpvp.2022.104787
Effective strategies of metamodeling and optimization of hot incremental sheet forming process of Ti6Al4Vartificial hip joint component
M. Sbayti, A. Ghiotti, R. Bahloul, H. BelhadjSalah and S. BruschiJournal of Computational Science 60 101595 (2022)
https://doi.org/10.1016/j.jocs.2022.101595
Investigation of flexible free incremental sheet forming (FFISF) process to form Ti6Al4V free-form surface panel at room temperature
M Yang, Z D Chang and J ChenIOP Conference Series: Materials Science and Engineering 1270 (1) 012086 (2022)
https://doi.org/10.1088/1757-899X/1270/1/012086
Advances in Mechanical Engineering, Materials and Mechanics
M. Sbayti, R. Bahloul and H. BelhadjsalahLecture Notes in Mechanical Engineering, Advances in Mechanical Engineering, Materials and Mechanics 144 (2021)
https://doi.org/10.1007/978-3-030-52071-7_21
Effect of operational parameters on incremental forming of low-alloy sheet metals and its optimisation
Ömer SeçginAdvances in Materials and Processing Technologies 7 (1) 71 (2021)
https://doi.org/10.1080/2374068X.2020.1753449
Failure investigation on high velocity impact deformation of Boron Carbide (B4C) reinforced fiber metal laminates of Titanium / Glass fiber reinforced polymer
Dr.S. Suresh Kumar, Shankar P. A and Lalith Kumar KDefence Technology (2021)
https://doi.org/10.1016/j.dt.2021.04.006
Single-Point Incremental Forming of Titanium and Titanium Alloy Sheets
Valentin Oleksik, Tomasz Trzepieciński, Marcin Szpunar, Łukasz Chodoła, Daniel Ficek and Ireneusz SzczęsnyMaterials 14 (21) 6372 (2021)
https://doi.org/10.3390/ma14216372
Accuracy and Sheet Thinning Improvement of Deep Titanium Alloy Part with Warm Incremental Sheet-Forming Process
Badreddine Saidi, Laurence Giraud Moreau, Abel Cherouat and Rachid NasriJournal of Manufacturing and Materials Processing 5 (4) 122 (2021)
https://doi.org/10.3390/jmmp5040122
Incremental sheet forming towards biomedical implants: a review
Zinan Cheng, Yanle Li, Changxu Xu, et al.Journal of Materials Research and Technology 9 (4) 7225 (2020)
https://doi.org/10.1016/j.jmrt.2020.04.096
Efficiency of optimization algorithms on the adjustment of process parameters for geometric accuracy enhancement of denture plate in single point incremental sheet forming
Manel Sbayti, Riadh Bahloul and Hedi BelhadjsalahNeural Computing and Applications 32 (13) 8829 (2020)
https://doi.org/10.1007/s00521-019-04354-y
Experimental investigation of new blank holder approach for incremental forming method
Ömer Seçgin and İbrahim ÖzsertThe International Journal of Advanced Manufacturing Technology 101 (1-4) 357 (2019)
https://doi.org/10.1007/s00170-018-2880-2
Investigations on the influence of heat on AA1050 sheet during incremental forming
Swarit Singh, Satwik Priyadarshi and Puneet TandonLetters on Materials 9 (4s) 523 (2019)
https://doi.org/10.22226/2410-3535-2019-4-523-527
Formability Analyses on Single Point Incremental Sheet Forming Process on Aluminum 1050
Dawit Desalegn, P. Janaki Ramulu, Dagmawi Hailu, S. Senthil Kumaran, P. Velmurugan and D. VenkateswarluMaterials Science Forum 969 703 (2019)
https://doi.org/10.4028/www.scientific.net/MSF.969.703
DKP37 Sacının Kayar Artımlı Şekillendirme (TPIF_RL) Yöntemiyle Şekillendirme İşleminin Taguchi ve Cevap Yüzey Metodu ile Optimizasyonu
Ömer SEÇGİN and İbrahim ÖZSERTDüzce Üniversitesi Bilim ve Teknoloji Dergisi 7 (1) 201 (2019)
https://doi.org/10.29130/dubited.432595