EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 78 (2016) 01077 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Effect of laser beam drift at high scanning speed on relative density, thickness and roughness of thin-walled TC11 specimen by selective laser melting

Feipeng An, Xiwang Liu, Xueliang Zeng, Linjie Zhang, Jie Ning and Suck Joo Na
Journal of Manufacturing Processes 139 38 (2025)
https://doi.org/10.1016/j.jmapro.2025.01.098

Multi-objective Optimization of Process Parameters for Surface Quality and Geometric Tolerances of AlSi10Mg Samples Produced by Additive Manufacturing Method Using Taguchi-Based Gray Relational Analysis

Uğur Işik, Halil Demir and Barış Özlü
Arabian Journal for Science and Engineering 50 (12) 9211 (2025)
https://doi.org/10.1007/s13369-024-09333-7

Prediction of dimensional deviation and quality tolerance class in the production of AlSi10Mg alloy parts with laser powder bed fusion using machine learning algorithms

Yusuf Siyambaş, Yakup Turgut and Aslan Akdulum
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2025)
https://doi.org/10.1177/09544089251321236

Influence of SLM block support design on geometrical quality of AISI 316 l cantilever features and its impact on post-processing

Lorenzo Pollicini, Federico Mazzucato and Anna Valente
Materials Research Express 11 (1) 016510 (2024)
https://doi.org/10.1088/2053-1591/ad1948

Experimental investigation and optimization of the effects of manufacturing parameters on geometric tolerances in additive manufacturing of AlSi10Mg alloy

Yusuf Siyambaş and Yakup Turgut
The International Journal of Advanced Manufacturing Technology 134 (1-2) 415 (2024)
https://doi.org/10.1007/s00170-024-14128-z

Weight Factor as a Parameter for Optimal Part Orientation in the L-PBF Printing Process Using Numerical Simulation

Ľuboš Kaščák, Ján Varga, Jana Bidulská, Róbert Bidulský and Diego Manfredi
Materials 17 (14) 3604 (2024)
https://doi.org/10.3390/ma17143604

The influence of abrasive finishing conditions on the surface texture of Inconel 939 elements made using the 3D printing LPBF method

Ewa Wojtiuk, Joanna Radziejewska and Michał Marczak
Welding Technology Review 96 34 (2024)
https://doi.org/10.26628/simp.wtr.v96.1180.34-40

Optimizing AlSi10Mg Part Quality Aspects in Laser Powder Bed Fusion: A Literature Review

El-Mehdi Kiass, Khalid Zarbane and Zitouni Beidouri
Lasers in Manufacturing and Materials Processing 11 (4) 905 (2024)
https://doi.org/10.1007/s40516-024-00267-4

Effect of a Surface Element Exposure Algorithm for Selective Laser Melting on the Mechanical Properties of the Synthesized Material: I. Short- and Long-Term Strength

A. G. Evgenov, P. V. Ryzhkov, S. V. Shurtakov and R. Yu. Malinin
Russian Metallurgy (Metally) 2024 (2) 331 (2024)
https://doi.org/10.1134/S0036029524700629

Investigation on selective laser-melted AlSi10Mg micro-struts: influence of processing parameters on dimensional accuracy, molten pool morphology and microhardness

Oğulcan Eren, Hüseyin Kürşad Sezer, Nurullah Yüksel, Ahmad Reshad Bakhtarı and Olcay Ersel Canyurt
Rapid Prototyping Journal 30 (8) 1556 (2024)
https://doi.org/10.1108/RPJ-05-2023-0164

Experimental and Statistical Analysis of the Effect of Heat Treatment on Surface Roughness and Mechanical Properties of Thin-Walled Samples Obtained by Selective Laser Melting from the Material AlSi10Mg

Sergey N. Grigoriev, Nikita Nikitin, Oleg Yanushevich, Natella Kriheli, Olga Kramar, Roman Khmyrov, Idarmach Idarmachev and Pavel Peretyagin
Materials 16 (23) 7326 (2023)
https://doi.org/10.3390/ma16237326

Compact Additively Manufactured Conformal Slotted Waveguide Antenna Array

Charalampos Stoumpos, Thierry Le Gouguec, Rozenn Allanic, María García-Vigueras and Anne-Charlotte Amiaud
IEEE Antennas and Wireless Propagation Letters 22 (8) 1843 (2023)
https://doi.org/10.1109/LAWP.2023.3266376

Features of the process of selective laser melting from structural steel 28Cr3SiNiMoWV

D.S. Kolchanov, A.A. Drenin, A.O. Denezhkin, L.A. Shustova and S.R. Safiullin
Proceedings of Higher Educational Institutions. Маchine Building (10 (751)) 79 (2022)
https://doi.org/10.18698/0536-1044-2022-10-79-88

Effect of Heat Treatment on Ductility and Precipitation Size of Additively Manufactured AlSi10Mg

Sandra Megahed, Jannik Bühring, Tobias Duffe, Aleksandar Bach, Kai-Uwe Schröder and Johannes Henrich Schleifenbaum
Metals 12 (8) 1311 (2022)
https://doi.org/10.3390/met12081311

Special Features of Formation of Surface by Selective Laser Melting

M. M. Bakradze, A. M. Rogalev, D. I. Sukhov and G. G. Aslanyan
Metal Science and Heat Treatment 64 (1-2) 108 (2022)
https://doi.org/10.1007/s11041-022-00769-y

Effects of remelting on the surface morphology, microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting

Zezhou Kuai, Zhonghua Li, Bin Liu, Wenpeng Liu and Shuai Yang
Materials Chemistry and Physics 285 125901 (2022)
https://doi.org/10.1016/j.matchemphys.2022.125901

Laser polishing: a review of a constantly growing technology in the surface finishing of components made by additive manufacturing

Annamaria Gisario, Massimiliano Barletta and Francesco Veniali
The International Journal of Advanced Manufacturing Technology 120 (3-4) 1433 (2022)
https://doi.org/10.1007/s00170-022-08840-x

Effect of Fabrication Method on Tensile Behaviour of Polysiloxane (POS) Filled Rice Husk Silica (RHA SiO2) Composites

Mohd Azham Azmi, Sufian Mohamad Yahya, Sufizar Ahmad, Shahruddin Mahzan, Hamimah Abdul Rahman, Nurul Akidah Baharuddin, Hanis Zakaria, Suhaimi Hassan and Hariati Taib
Solid State Phenomena 317 320 (2021)
https://doi.org/10.4028/www.scientific.net/SSP.317.320

Side surface topography generation during laser powder bed fusion of AlSi10Mg

E. Masiagutova, F. Cabanettes, A. Sova, M. Cici, G. Bidron and P. Bertrand
Additive Manufacturing 47 102230 (2021)
https://doi.org/10.1016/j.addma.2021.102230

Manufacturing of Closed Impeller for Mechanically Pump Fluid Loop Systems Using Selective Laser Melting Additive Manufacturing Technology

Alexandra Adiaconitei, Ionut Sebastian Vintila, Radu Mihalache, Alexandru Paraschiv, Tiberius Florian Frigioescu, Ionut Florian Popa and Laurent Pambaguian
Materials 14 (20) 5908 (2021)
https://doi.org/10.3390/ma14205908

Morphology of Models Manufactured by SLM Technology and the Ti6Al4V Titanium Alloy Designed for Medical Applications

Damian Gogolewski, Tomasz Kozior, Paweł Zmarzły and Thomas G. Mathia
Materials 14 (21) 6249 (2021)
https://doi.org/10.3390/ma14216249

Waviness of Freeform Surface Characterizations from Austenitic Stainless Steel (316L) Manufactured by 3D Printing-Selective Laser Melting (SLM) Technology

Tomasz Kozior, Jerzy Bochnia, Paweł Zmarzły, Damian Gogolewski and Thomas G. Mathia
Materials 13 (19) 4372 (2020)
https://doi.org/10.3390/ma13194372

The Influence of Printing Orientation on Surface Texture Parameters in Powder Bed Fusion Technology with 316L Steel

Tomasz Kozior and Jerzy Bochnia
Micromachines 11 (7) 639 (2020)
https://doi.org/10.3390/mi11070639

Rapid fabrication of ion optics by selective laser melting

Miguel Sangregorio, Ningfei Wang, Kan Xie, Zun Zhang and Xiaojun Wang
Rapid Prototyping Journal 25 (2) 299 (2019)
https://doi.org/10.1108/RPJ-05-2017-0085

A study of frequency and pulses for stepper motor controller system by using programmable logic controller

S Hassan, M S Yusof, Z Embong, et al.
Journal of Physics: Conference Series 1150 012040 (2019)
https://doi.org/10.1088/1742-6596/1150/1/012040