Effect of Building Height on Microstructure and Mechanical Properties of Big-Sized Ti-6Al-4V Plate Fabricated by Electron Beam Melting
MATEC Web of Conferences, 30 (2015) 02001
Published online: 2015-11-04
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Effect of build height on structural integrity of Ti-6Al-4V fabricated via laser powder bed fusion
MohammadBagher Mahtabi, Aref Yadollahi, Saeed Ataollahi and Mohammad J. MahtabiEngineering Failure Analysis 154 107691 (2023)
https://doi.org/10.1016/j.engfailanal.2023.107691
The effect of heat treatment on microstructure, microhardness, and pitting corrosion of Ti6Al4V produced by electron beam melting additive manufacturing process
Mingzhen Xiu, Yong Teck Tan, Srinivasan Raghavan, Min Hao Goh and Mui Ling Sharon NaiThe International Journal of Advanced Manufacturing Technology 120 (1-2) 1281 (2022)
https://doi.org/10.1007/s00170-022-08839-4
Corrosion behavior of AM-Ti-6Al-4V: a comparison between EBM and SLM
Polina Metalnikov, Guy Ben-Hamu and Dan EliezerProgress in Additive Manufacturing 7 (3) 509 (2022)
https://doi.org/10.1007/s40964-022-00293-8
Tribological Behavior of Additively Manufactured Metal Components
Raj Shah, Nikhil Pai, Andreas Rosenkranz, Khosro Shirvani and Max MarianJournal of Manufacturing and Materials Processing 6 (6) 138 (2022)
https://doi.org/10.3390/jmmp6060138
Effect of specimen geometry and orientation on tensile properties of Ti-6Al-4V manufactured by electron beam powder bed fusion
Gitanjali Shanbhag, Evan Wheat, Shawn Moylan and Mihaela VlaseaAdditive Manufacturing 48 102366 (2021)
https://doi.org/10.1016/j.addma.2021.102366
Microstructure of Additive Manufactured Ti6Al4V by Electron Beam Melting
Nan Nan Wang, Bao Hong Zhu, De Fu Li, et al.Materials Science Forum 1035 243 (2021)
https://doi.org/10.4028/www.scientific.net/MSF.1035.243
Superior energy absorption of continuously graded microlattices by electron beam additive manufacturing
Sing Ying Choy, Chen-Nan Sun, Wai Jack Sin, et al.Virtual and Physical Prototyping 16 (1) 14 (2021)
https://doi.org/10.1080/17452759.2020.1868656
Control of residual oxygen of the process atmosphere during laser-powder bed fusion processing of Ti-6Al-4V
C. Pauzon, K. Dietrich, P. Forêt, S. Dubiez-Le Goff, E. Hryha and G. WittAdditive Manufacturing 38 101765 (2021)
https://doi.org/10.1016/j.addma.2020.101765
Role of Superficial Defects and Machining Depth in Tensile Properties of Electron Beam Melting (EBM) Made Inconel 718
Xiaoyu Zhao, Amir Rashid, Annika Strondl, et al.Journal of Materials Engineering and Performance 30 (3) 2091 (2021)
https://doi.org/10.1007/s11665-021-05487-9
Hydrogen trapping in additive manufactured Ti–6Al–4V alloy
Polina Metalnikov, Dan Eliezer and Guy Ben-HamuMaterials Science and Engineering: A 811 141050 (2021)
https://doi.org/10.1016/j.msea.2021.141050
Additive manufacturing of Ti6Al4V alloy via electron beam melting for the development of implants for the biomedical industry
José A. Tamayo, Mateo Riascos, Carlos A. Vargas and Libia M. BaenaHeliyon 7 (5) e06892 (2021)
https://doi.org/10.1016/j.heliyon.2021.e06892
Effect of Gradient Energy Density on the Microstructure and Mechanical Properties of Ti6Al4V Fabricated by Selective Electron Beam Additive Manufacture
Ta-I Hsu, Yu-Ting Jhong and Meng-Hsiu TsaiMaterials 13 (7) 1509 (2020)
https://doi.org/10.3390/ma13071509
Effect of defects and specimen size with rectangular cross-section on the tensile properties of additively manufactured components
Pan Wang, Min Hao Goh, Qiang Li, Mui Ling Sharon Nai and Jun WeiVirtual and Physical Prototyping 15 (3) 251 (2020)
https://doi.org/10.1080/17452759.2020.1733430
Microstructure and Mechanical Properties of Ti-6Al-4V Fabricated by Electron Beam Melting
Jiangtao Ran, Fengchun Jiang, Xiaojing Sun, Zhuo Chen, Cao Tian and Hong ZhaoCrystals 10 (11) 972 (2020)
https://doi.org/10.3390/cryst10110972
Effect of build thickness and geometry on quasi-static and fatigue behavior of Ti-6Al-4V produced by Electron Beam Melting
N. Razavi, B. Van Hooreweder and F. BertoAdditive Manufacturing 36 101426 (2020)
https://doi.org/10.1016/j.addma.2020.101426
Effect of overlap distance on the microstructure and mechanical properties of in situ welded parts built by electron beam melting process
Pan Wang, Mui Ling Sharon Nai, Wai Jack Sin, et al.Journal of Alloys and Compounds 772 247 (2019)
https://doi.org/10.1016/j.jallcom.2018.09.093
Scanning optical microscopy for porosity quantification of additively manufactured components
Pan Wang, Xipeng Tan, Chaoyi He, Mui Ling Sharon Nai, Ruoxuan Huang, Shu Beng Tor and Jun WeiAdditive Manufacturing 21 350 (2018)
https://doi.org/10.1016/j.addma.2018.03.019
Realizing a full volume component by in-situ welding during electron beam melting process
Pan Wang, Mui Ling Sharon Nai, Wai Jack Sin, Shenglu Lu, Baicheng Zhang, Jiaming Bai, Jie Song and Jun WeiAdditive Manufacturing 22 375 (2018)
https://doi.org/10.1016/j.addma.2018.05.022
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok, X.P. Tan, P. Wang, M.L.S. Nai, N.H. Loh, E. Liu and S.B. TorMaterials & Design 139 565 (2018)
https://doi.org/10.1016/j.matdes.2017.11.021
Heat treatment of electron beam melted (EBM) Ti-6Al-4V: microstructure to mechanical property correlations
Srinivasan Raghavan, Mui Ling Sharon Nai, Pan Wang, et al.Rapid Prototyping Journal 24 (4) 774 (2018)
https://doi.org/10.1108/RPJ-05-2016-0070
Study of Direct Fabrication of a Ti-6Al-4V Impeller on a Wrought Ti-6Al-4V Plate by Electron Beam Melting
Pan Wang, Mui Ling Sharon Nai, Shenglu Lu, et al.JOM 69 (12) 2738 (2017)
https://doi.org/10.1007/s11837-017-2610-5
Effects of Processing Parameters on Surface Roughness of Additive Manufactured Ti-6Al-4V via Electron Beam Melting
Pan Wang, Wai Sin, Mui Nai and Jun WeiMaterials 10 (10) 1121 (2017)
https://doi.org/10.3390/ma10101121
Microstructure and mechanical properties of a newly developed low Young's modulus Ti–15Zr–5Cr–2Al biomedical alloy
Pan Wang, Lihong Wu, Yan Feng, et al.Materials Science and Engineering: C 72 536 (2017)
https://doi.org/10.1016/j.msec.2016.11.101
TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings
Pan Wang, Mui Ling Sharon Nai, Xipeng Tan, et al.TMS 2016: 145thAnnual Meeting & Exhibition: Supplemental Proceedings 1 (2016)
https://doi.org/10.1002/9781119274896.ch1
Microstructure and Wear Properties of Electron Beam Melted Ti-6Al-4V Parts: A Comparison Study against As-Cast Form
Wei Toh, Pan Wang, Xipeng Tan, Mui Nai, Erjia Liu and Shu TorMetals 6 (11) 284 (2016)
https://doi.org/10.3390/met6110284
Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti–6Al–4V component
Pan Wang, Xipeng Tan, Mui Ling Sharon Nai, Shu Beng Tor and Jun WeiMaterials & Design 95 287 (2016)
https://doi.org/10.1016/j.matdes.2016.01.093