EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web of Conferences, 21 (2015) 05015 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Microstructures and mechanical behaviors of FSW 6082-T6 Al alloy joints

Pin-Kui Ma, De-Ping Jiang, Hai-Long Jia, Yu-Xue Zhang, Yi-Hang Yang, Wei Liu, Jia-Wang Song and Min Zha
International Journal of Mechanical Sciences 310 111072 (2026)
https://doi.org/10.1016/j.ijmecsci.2025.111072

Metallurgical response of AA6063 refill friction stir spot welded joints to post-weld heat treatments

Houssem Eddine Lakache, Chourouk Merazga, Adel Belattar and Abdelghani May
Welding in the World (2025)
https://doi.org/10.1007/s40194-025-02145-9

Manufacturing Route for Hot Stamping of Aluminium Alloy Applied to a Wing Rib

Amaia Arroyo, Garbiñe Atxaga and Begoña Canflanca
Key Engineering Materials 1034 3 (2025)
https://doi.org/10.4028/p-jRUp7r

Investigating the influence of biodegradable nanofluid process cooling on dynamic recrystallization and grain microstructure in friction stir welding of AA6082 alloy

Shubham Verma, ChuanSong Wu, Lalit Thakur, Najib Ahmad Muhammad and Shengli Li
Journal of Materials Processing Technology 336 118700 (2025)
https://doi.org/10.1016/j.jmatprotec.2024.118700

Aluminum Alloy Hot Stamping and Forming Technology: A Review

Ruolin Wu, Wei Dai, Jiake Luo, Mengxin Li, Yuan Liu and Huanhuan Li
Materials 18 (8) 1694 (2025)
https://doi.org/10.3390/ma18081694

A data-informed review of scientific and technological developments and future trends in hot stamping

Jiaqi Li, Chenpeng Tong, Ruiqiang Zhang, Zhusheng Shi and Jianguo Lin
International Journal of Lightweight Materials and Manufacture 7 (2) 327 (2024)
https://doi.org/10.1016/j.ijlmm.2023.11.003

Investigation of the microstructural behavior of Al–Mg–Si(X)–Mn aluminum alloys based on biaxial hot tensile tests

Oleksandr Lypchanskyi, Nikhil Reddy Kurri, Grzegorz Korpała, Bogusław Augustyn, Dawid Kapinos and Ulrich Prahl
Journal of Materials Science 59 (40) 18916 (2024)
https://doi.org/10.1007/s10853-024-09973-y

Hot Sheet Metal Forming Strategies for High‐Strength Aluminum Alloys: A Review—Fundamentals and Applications

Emad Scharifi, Victoria A. Yardley, Ursula Weidig, Damian Szegda, Jianguo Lin and Kurt Steinhoff
Advanced Engineering Materials 25 (16) (2023)
https://doi.org/10.1002/adem.202300141

Hot Stamping of a B-Pillar Reinforced Panel With 7075 Aluminum Alloy and the Feasibility Study of Short-Time Aging

Yong Liu, Jiahao Li, Liang Wang, et al.
Frontiers in Materials 7 (2021)
https://doi.org/10.3389/fmats.2020.617223

Influence of Hot Deformation on the Precipitation Hardening of High-Strength Aluminum AA7075 during Thermo-Mechanical Processing

Emad Scharifi, Daria Shoshmina, Stefan Biegler, Ursula Weidig and Kurt Steinhoff
Metals 11 (5) 681 (2021)
https://doi.org/10.3390/met11050681

Effect of thermo-mechanical processing on quench-induced precipitates morphology and mechanical properties in high strength AA7075 aluminum alloy

E. Scharifi, U. Savaci, Z.B. Kavaklioglu, U. Weidig, S. Turan and K. Steinhoff
Materials Characterization 174 111026 (2021)
https://doi.org/10.1016/j.matchar.2021.111026

Deformation Characteristics in a Stretch-Based Dimensional Correction Method for Open, Thin-Walled Extrusions

Xianyan Zhou, Torgeir Welo, Jun Ma and Sigmund A. Tronvoll
Metals 11 (11) 1786 (2021)
https://doi.org/10.3390/met11111786

Dynamic Tensile Deformation of High Strength Aluminum Alloys Processed Following Novel Thermomechanical Treatment Strategies

Emad Scharifi, Seyed Vahid Sajadifar, Ghazal Moeini, Ursula Weidig, Stefan Böhm, Thomas Niendorf and Kurt Steinhoff
Advanced Engineering Materials 22 (8) (2020)
https://doi.org/10.1002/adem.202000193

The Influence of Quench Interruption and Direct Artificial Aging on the Hardening Response in AA6082 during Hot Deformation and In-Die Quenching

Benedikte Myrold, Ola Jensrud and Knut Erik Snilsberg
Metals 10 (7) 935 (2020)
https://doi.org/10.3390/met10070935

The tribology of Ag/MoS2-based self-lubricating laser claddings for high temperature forming of aluminium alloys

H. Torres, T. Caykara, H. Rojacz, B. Prakash and M. Rodríguez Ripoll
Wear 442-443 203110 (2020)
https://doi.org/10.1016/j.wear.2019.203110

Fast solution heat treatment of high strength aluminum alloy sheets in radiant heating furnace during hot stamping

Yong Liu, Bin Zhu, Yilin Wang, Shiqi Li and Yisheng Zhang
International Journal of Lightweight Materials and Manufacture 3 (1) 20 (2020)
https://doi.org/10.1016/j.ijlmm.2019.11.004

An experimental investigation of the drawability of AA6082 sheet under different elevated temperature forming processes

Kailun Zheng, Lei Zhu, Jianguo Lin, Trevor A. Dean and Nan Li
Journal of Materials Processing Technology 273 116225 (2019)
https://doi.org/10.1016/j.jmatprotec.2019.05.006

Thermo-mechanical forming procedure of high strength Aluminum sheet with improved mechanical properties and process efficiency

Emad Scharifi, Ruben Knoth and Ursula Weidig
Procedia Manufacturing 29 481 (2019)
https://doi.org/10.1016/j.promfg.2019.02.165

An experimental investigation on the deformation and post-formed strength of heat-treatable aluminium alloys using different elevated temperature forming processes

Kailun Zheng, Yangchun Dong, Dengqi Zheng, Jianguo Lin and Trevor A. Dean
Journal of Materials Processing Technology 268 87 (2019)
https://doi.org/10.1016/j.jmatprotec.2018.11.042