Tailoring the grain structure of IN718 during selective electron beam melting
MATEC Web of Conferences, 14 (2014) 08001
Published online: 2014-08-29
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
319 (2025)
https://doi.org/10.1007/978-3-658-47443-0_6
Tailoring grain structure including grain size distribution, morphology, and orientation via building parameters on 316L parts produced by laser powder bed fusion
Nada Hassine, Sami Chatti and Lioua KolsiThe International Journal of Advanced Manufacturing Technology 131 (9-10) 4483 (2024)
https://doi.org/10.1007/s00170-024-13181-y
Electron Beam Powder Bed Fusion Additive Manufacturing: A Comprehensive Review and its Development in China
Mohan Jiao, Hongyu Long, Buwei Xiao, Xiaoyu Liang and Feng LinAdditive Manufacturing Frontiers 3 (4) 200177 (2024)
https://doi.org/10.1016/j.amf.2024.200177
Liquation cracking facilitated by stray-grain chains in a high-γ'-content nickel-based alloy K4002 produced via electron beam powder bed fusion
Yunting Li, Maodong Kang, Yang Zhou, Yuantao Xu, Huipeng Yu, Yufei Pan, Jun Wang and Chengqi ZhangMaterials Characterization 218 114589 (2024)
https://doi.org/10.1016/j.matchar.2024.114589
Three-Dimensional Non-Homogeneous Microstructure Representation Using 2D Electron Backscatter Diffraction Data for Additive-Manufactured Hastelloy X
Liene Zaikovska, Magnus Ekh, Mohit Gupta and Johan MoverareMaterials 17 (23) 5937 (2024)
https://doi.org/10.3390/ma17235937
379 (2024)
https://doi.org/10.1007/978-3-031-57152-7_9
Effect of Scanning Strategies on Grain Structure and Texture of Additively Manufactured Lattice Struts: A Numerical Exploration
Zerong Yang, Johannes A. Koepf, Matthias Markl and Carolin KörnerAdvanced Engineering Materials (2024)
https://doi.org/10.1002/adem.202400661
Pathways to exploit the multi-spot scanning strategy in electron beam additive manufacturing for control of microstructure and defect density
T. Arold, P. Krooß and T. NiendorfJournal of Materials Research and Technology 31 1044 (2024)
https://doi.org/10.1016/j.jmrt.2024.06.043
Advancement of Additive Manufacturing Technology Owing to Data Science
Kenta AOYAGIJournal of the Japan Society of Powder and Powder Metallurgy 71 (12) 619 (2024)
https://doi.org/10.2497/jjspm.24-00012
Computer-Aided Optimisation in Additive Manufacturing Processes: A State of the Art Survey
Tanja Emilie Henriksen, Tanita Fossli Brustad, Rune Dalmo and Aleksander PedersenJournal of Manufacturing and Materials Processing 8 (2) 76 (2024)
https://doi.org/10.3390/jmmp8020076
33 (2024)
https://doi.org/10.1016/B978-0-323-99539-9.00002-3
Laser beam shaping facilitates tailoring the mechanical properties of IN718 during powder bed fusion
José David Pérez-Ruiz, Francesco Galbusera, Leonardo Caprio, Barbara Previtali, Luis Norberto López de Lacalle, Aitzol Lamikiz and Ali Gökhan DemirJournal of Materials Processing Technology 328 118393 (2024)
https://doi.org/10.1016/j.jmatprotec.2024.118393
A Comparison of Microstructure and Microhardness Properties of IN718 Fabricated via Powder- and Wire-Fed Laser-Directed Energy Deposition
Nandana Menon, Brady A. Sawyer, Cory D. Jamieson, Edward W. Reutzel and Amrita BasakMaterials 16 (3) 1129 (2023)
https://doi.org/10.3390/ma16031129
Fine-grained microstructure without texture obtained by electron beam powder bed fusion for AISI 304 L-based stainless steel
Christina Burkhardt, Marco Wendler, Robert Lehnert, Michael Hauser, Philipp Clausnitzer, Olena Volkova, Horst Biermann and Anja WeidnerAdditive Manufacturing 69 103539 (2023)
https://doi.org/10.1016/j.addma.2023.103539
Room and elevated temperature tensile and fatigue behaviour of additively manufactured Hastelloy X
Amal Shaji Karapuzha, Darren Fraser, Daniel Schliephake, Stefan Dietrich, Yuman Zhu, Xinhua Wu and Aijun HuangMaterials Science and Engineering: A 882 145479 (2023)
https://doi.org/10.1016/j.msea.2023.145479
Using Selective Electron Beam Melting to Enhance the High‐Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites
Andreas Förner, Jan Vollhüter, Anna Krapf, Abdullah Jamjoom, Daniel Hausmann, Benjamin Wahlmann, Zongwen Fu, Carolin Körner, Steffen Neumeier and Mathias GökenAdvanced Engineering Materials 25 (15) (2023)
https://doi.org/10.1002/adem.202300407
Electron beam powder bed fusion for direct microstructure design – In-depth analysis of prospects and limitations of the multi spot scanning strategy
Tizian Arold, Andreas Suckau, Stefan Böhm, Philipp Krooß and Thomas NiendorfJournal of Manufacturing Processes 108 485 (2023)
https://doi.org/10.1016/j.jmapro.2023.10.070
1 (2023)
https://doi.org/10.1002/9781394229055.ch1
Enhancing equiaxed grain formation in a high-alloy tool steel using dual laser powder bed fusion
Simon Bergmueller, Josef Scheiber, Lukas Kaserer and Gerhard LeichtfriedAdditive Manufacturing 74 103727 (2023)
https://doi.org/10.1016/j.addma.2023.103727
345 (2023)
https://doi.org/10.1002/9781394166985.ch14
689 (2023)
https://doi.org/10.1016/B978-0-323-88664-2.00015-4
Directed energy deposition of pure copper using blue laser
Xiao Liu, Haoren Wang, Kevin Kaufmann and Kenneth VecchioJournal of Manufacturing Processes 85 314 (2023)
https://doi.org/10.1016/j.jmapro.2022.11.064
Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship
Amir Mostafaei, Reza Ghiaasiaan, I-Ting Ho, Seth Strayer, Kai-Chun Chang, Nima Shamsaei, Shuai Shao, Santanu Paul, An-Chou Yeh, Sammy Tin and Albert C. ToProgress in Materials Science 136 101108 (2023)
https://doi.org/10.1016/j.pmatsci.2023.101108
Systematic approach to process parameter optimization for laser powder bed fusion of low-alloy steel based on melting modes
Simon Bergmueller, Lukas Gerhold, Lorenz Fuchs, Lukas Kaserer and Gerhard LeichtfriedThe International Journal of Advanced Manufacturing Technology 126 (9-10) 4385 (2023)
https://doi.org/10.1007/s00170-023-11377-2
Process window for electron beam melting of Ti–42Nb wt.%
Irina Yu Grubova, Maria Kozadaeva, Anastasia P. Volkova, Dmitriy Khrapov, Roman A. Surmenev, Andrey V. Koptyug, Alina Vladescu (Dragomir), Alexander Tyurin and Maria A. SurmenevaJournal of Materials Research and Technology 25 4457 (2023)
https://doi.org/10.1016/j.jmrt.2023.06.234
A state-of-the-art review on fatigue performance of powder bed fusion-built alloy 718
Esmaeil Sadeghi, Paria Karimi, Reza Esmaeilizadeh, Filippo Berto, Shuai Shao, Johan Moverare, Ehsan Toyserkani and Nima ShamsaeiProgress in Materials Science 133 101066 (2023)
https://doi.org/10.1016/j.pmatsci.2022.101066
Process-aware optimisation of lattice structure by electron beam powder bed fusion
Manuela Galati, Massimo Giordano and Luca IulianoProgress in Additive Manufacturing 8 (3) 477 (2023)
https://doi.org/10.1007/s40964-022-00339-x
319 (2023)
https://doi.org/10.1007/978-3-031-20752-5_20
Role of scan strategies and heat treatment on grain structure evolution in Fe-Si soft magnetic alloys made by laser-powder bed fusion
MP Haines, F. List, K. Carver, DN Leonard, A. Plotkowski, CM Fancher, RR Dehoff and SS BabuAdditive Manufacturing 50 102578 (2022)
https://doi.org/10.1016/j.addma.2021.102578
Recent Advances in Alloy Development for Metal Additive Manufacturing in Gas Turbine/Aerospace Applications: A Review
Dheepa Srinivasan and Kiruthika AnanthJournal of the Indian Institute of Science 102 (1) 311 (2022)
https://doi.org/10.1007/s41745-022-00290-4
Alloy design and adaptation for additive manufacture
A.T. Clare, R.S. Mishra, M. Merklein, H. Tan, I. Todd, L. Chechik, J. Li and M. BambachJournal of Materials Processing Technology 299 117358 (2022)
https://doi.org/10.1016/j.jmatprotec.2021.117358
On the Impact of Build Envelope Sizes on E-PBF Processed Pure Iron
C. J. J. Torrent, P. Krooß and T. NiendorfMetallurgical and Materials Transactions B 53 (1) 8 (2022)
https://doi.org/10.1007/s11663-021-02368-3
A survey on basic influencing factors of solidified grain morphology during electron beam melting
Yufan Zhao, Kenta Aoyagi, Kenta Yamanaka and Akihiko ChibaMaterials & Design 221 110927 (2022)
https://doi.org/10.1016/j.matdes.2022.110927
A novel element based approach for engineered microstructure evolution in Inconel 718 by laser powder bed fusion
Jitendar Kumar TiwariMaterials Letters 133751 (2022)
https://doi.org/10.1016/j.matlet.2022.133751
Performance Analysis of Electro-chemical Machining of Ti-48Al-2Nb-2Cr Produced by Electron Beam Melting
Manuela Galati, Silvio Defanti and Lucia DentiSmart and Sustainable Manufacturing Systems 6 (1) 53 (2022)
https://doi.org/10.1520/SSMS20210041
Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties
Nana Kwabena Adomako, Nima Haghdadi and Sophie PrimigMaterials & Design 223 111245 (2022)
https://doi.org/10.1016/j.matdes.2022.111245
A preliminary account of electro-chemical machining of Ti-48Al-2Nb-2Cr produced by electron beam melting
Manuela Galati, Silvio Defanti, Nicolò Vincenzi, Giovanni Marchiandi, Andrea Gatto and Luca IulianoProcedia CIRP 112 322 (2022)
https://doi.org/10.1016/j.procir.2022.09.103
COMPUTATIONAL MODELING AND PHYSICS-INFORMED MACHINE LEARNING OF METAL ADDITIVE MANUFACTURING: STATE-OF-THE-ART AND FUTURE PERSPECTIVE
R. Sharma and Y. B. GuoAnnual Review of Heat Transfer 24 (1) 303 (2022)
https://doi.org/10.1615/AnnualRevHeatTransfer.2022041733
Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques
Michael P. Haines, Vitor V. Rielli, Sophie Primig and Nima HaghdadiJournal of Materials Science 57 (30) 14135 (2022)
https://doi.org/10.1007/s10853-022-07501-4
Prediction of cyclic damage in metallic alloys with crystal plasticity modeling enhanced by machine learning
Wenye Ye, Jake Hohl and Leslie T MushongeraMaterialia 22 101388 (2022)
https://doi.org/10.1016/j.mtla.2022.101388
Comprehensive Study on Materials used in Different Types of Additive Manufacturing and their Applications
Rami AlfattniInternational Journal of Mathematical, Engineering and Management Sciences 7 (1) 92 (2022)
https://doi.org/10.33889/IJMEMS.2022.7.1.007
Solidification dynamics in metal additive manufacturing: analysis of model assumptions *
B Stump, A Plotkowski and J ColemanModelling and Simulation in Materials Science and Engineering 29 (3) 035001 (2021)
https://doi.org/10.1088/1361-651X/abca19
A Single Crystal Process Window for Electron Beam Powder Bed Fusion Additive Manufacturing of a CMSX-4 Type Ni-Based Superalloy
Julian Pistor, Christoph Breuning and Carolin KörnerMaterials 14 (14) 3785 (2021)
https://doi.org/10.3390/ma14143785
A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials
Andreas Kergaßner, Johannes A. Koepf, Matthias Markl, Carolin Körner, Julia Mergheim and Paul SteinmannJournal of Materials Engineering and Performance 30 (7) 5235 (2021)
https://doi.org/10.1007/s11665-021-05725-0
On the Microstructural and Cyclic Mechanical Properties of Pure Iron Processed by Electron Beam Melting
Christof Johannes Jaime Torrent, Steffen Wackenrohr, Julia Richter, César Ernesto Sobrero, Sebastian Degener, Philipp Krooß, Hans Jürgen Maier and Thomas NiendorfAdvanced Engineering Materials 23 (6) (2021)
https://doi.org/10.1002/adem.202100018
New Grain Formation Mechanisms during Powder Bed Fusion
Alexander M. Rausch, Julian Pistor, Christoph Breuning, Matthias Markl and Carolin KörnerMaterials 14 (12) 3324 (2021)
https://doi.org/10.3390/ma14123324
Laser Powder Bed Fusion Processing of Fe-Mn-Al-Ni Shape Memory Alloy—On the Effect of Elevated Platform Temperatures
Felix Clemens Ewald, Florian Brenne, Tobias Gustmann, Malte Vollmer, Philipp Krooß and Thomas NiendorfMetals 11 (2) 185 (2021)
https://doi.org/10.3390/met11020185
Columnar-to-equiaxed grain transition in powder bed fusion via mimicking casting solidification and promoting in situ recrystallization
Paria Karimi, Esmaeil Sadeghi, Joakim Ålgårdh, Ali Keshavarzkermani, Reza Esmaeilizadeh, Ehsan Toyserkani and Joel AnderssonAdditive Manufacturing 46 102086 (2021)
https://doi.org/10.1016/j.addma.2021.102086
Numerical simulation for electron beam selective melting PBF additive manufacturing of molybdenum
Muhammad Qasim Zafar, Chaochao Wu, Haiyan Zhao, Du Kai and Qianming GongThe International Journal of Advanced Manufacturing Technology 117 (5-6) 1575 (2021)
https://doi.org/10.1007/s00170-021-07671-6
Characterization of Inconel 718® superalloy fabricated by wire Arc Additive Manufacturing: effect on mechanical properties and machinability
Unai Alonso, Fernando Veiga, Alfredo Suárez and Alain Gil Del ValJournal of Materials Research and Technology 14 2665 (2021)
https://doi.org/10.1016/j.jmrt.2021.07.132
Influence of geometry on columnar to equiaxed transition during electron beam powder bed fusion of IN718
Narendran Raghavan, Benjamin C. Stump, Patxi Fernandez-Zelaia, Michael M. Kirka and Srdjan SimunovicAdditive Manufacturing 47 102209 (2021)
https://doi.org/10.1016/j.addma.2021.102209
Applications of artificial intelligence and machine learning in metal additive manufacturing
Leila Jannesari LadaniJournal of Physics: Materials 4 (4) 042009 (2021)
https://doi.org/10.1088/2515-7639/ac2791
Microstructure, mechanical behaviour and strengthening mechanisms in Hastelloy X manufactured by electron beam and laser beam powder bed fusion
Amal Shaji Karapuzha, Darren Fraser, Daniel Schliephake, Stefan Dietrich, Yuman Zhu, Xinhua Wu and Aijun HuangJournal of Alloys and Compounds 862 158034 (2021)
https://doi.org/10.1016/j.jallcom.2020.158034
Design for Additive Manufacturing: A Systematic Review
Abdullah Alfaify, Mustafa Saleh, Fawaz M. Abdullah and Abdulrahman M. Al-AhmariSustainability 12 (19) 7936 (2020)
https://doi.org/10.3390/su12197936
Inclusion-induced fatigue crack initiation in powder bed fusion of Alloy 718
Esmaeil Sadeghi, Paria Karimi, Niklas Israelsson, James Shipley, Tomas Månsson and Thomas HanssonAdditive Manufacturing 36 101670 (2020)
https://doi.org/10.1016/j.addma.2020.101670
Finite element framework for electron beam melting process simulation
Muhammad Qasim Zafar, Chao Chao Wu, Haiyan Zhao, Jinnan Wang and Xingjian HuThe International Journal of Advanced Manufacturing Technology 109 (7-8) 2095 (2020)
https://doi.org/10.1007/s00170-020-05707-x
Microstructural control during laser powder fusion to create graded microstructure Ni-superalloy components
B. Attard, S. Cruchley, Ch. Beetz, M. Megahed, Y.L. Chiu and M.M. AttallahAdditive Manufacturing 36 101432 (2020)
https://doi.org/10.1016/j.addma.2020.101432
On enhancing surface wear resistance via rotating grains during selective laser melting
Y. Yang, X. Li, M.M. Khonsari, Y. Zhu and H. YangAdditive Manufacturing 36 101583 (2020)
https://doi.org/10.1016/j.addma.2020.101583
Microstructure modelling for metallic additive manufacturing: a review
Joel Heang Kuan Tan, Swee Leong Sing and Wai Yee YeongVirtual and Physical Prototyping 15 (1) 87 (2020)
https://doi.org/10.1080/17452759.2019.1677345
Correlations of cracking with scan strategy and build geometry in electron beam powder bed additive manufacturing
Y.S. Lee, M.M. Kirka, J. Ferguson and V.C. PaquitAdditive Manufacturing 32 101031 (2020)
https://doi.org/10.1016/j.addma.2019.101031
Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components
Camille Guévenoux, Simon Hallais, Alexandre Charles, Eric Charkaluk and Andrei ConstantinescuOptics & Laser Technology 128 106218 (2020)
https://doi.org/10.1016/j.optlastec.2020.106218
990 (2020)
https://doi.org/10.1007/978-3-030-51834-9_97
Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review
Carolin Körner, Matthias Markl and Johannes A. KoepfMetallurgical and Materials Transactions A 51 (10) 4970 (2020)
https://doi.org/10.1007/s11661-020-05946-3
Micromechanical Response of Additively Manufactured 316L Stainless Steel Processed by High‐Pressure Torsion
Shahir Mohd Yusuf, Ying Chen, Shoufeng Yang and Nong GaoAdvanced Engineering Materials 22 (10) (2020)
https://doi.org/10.1002/adem.202000052
Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy
Rongpei Shi, Saad A. Khairallah, Tien T. Roehling, Tae Wook Heo, Joseph T. McKeown and Manyalibo J. MatthewsActa Materialia 184 284 (2020)
https://doi.org/10.1016/j.actamat.2019.11.053
Proceedings of the Future Technologies Conference (FTC) 2019
Samuel O. Alamu, Marc J Louise Caballes, Yulai Yang, Orlyse Mballa and Guangming ChenAdvances in Intelligent Systems and Computing, Proceedings of the Future Technologies Conference (FTC) 2019 1070 968 (2020)
https://doi.org/10.1007/978-3-030-32523-7_73
Microstructural control of alloy 718 fabricated by electron beam melting with expanded processing window by adaptive offset method
Xiao Ding, Yuichiro Koizumi, Kenta Aoyagi, et al.Materials Science and Engineering: A 764 138058 (2019)
https://doi.org/10.1016/j.msea.2019.138058
Gradient Enhanced Crystal Plasticity in Additive Manufacturing Identification of a Macroscopic Yield Criterion
Andreas Kergaßner, Julia Mergheim and Paul SteinmannPAMM 19 (1) (2019)
https://doi.org/10.1002/pamm.201900308
Handbuch Hochtemperatur-Werkstofftechnik
Hans Jürgen Maier, Thomas Niendorf and Ralf BürgelHandbuch Hochtemperatur-Werkstofftechnik 333 (2019)
https://doi.org/10.1007/978-3-658-25314-1_6
Effect of process parameters on melt pool geometry and microstructure development for electron beam melting of IN718: A systematic single bead analysis study
Xiao Ding, Yuichiro Koizumi, Daixiu Wei and Akihiko ChibaAdditive Manufacturing 26 215 (2019)
https://doi.org/10.1016/j.addma.2018.12.018
Comprehensive Study on Mechanisms for Grain Morphology Evolution and Texture Development in Powder Bed Fusion with Electron Beam of Co-Cr-Mo Alloy
Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, et al.Materialia 100346 (2019)
https://doi.org/10.1016/j.mtla.2019.100346
Mechanical response of a Laser Cladding repaired structure: localization of plastic strain due to microstructure gradient
Camille Guévenoux, Simon Hallais, Alexandre Charles, et al.MATEC Web of Conferences 300 03003 (2019)
https://doi.org/10.1051/matecconf/201930003003
Direct metal fabrication in rapid prototyping: A review
Naveed AhmedJournal of Manufacturing Processes 42 167 (2019)
https://doi.org/10.1016/j.jmapro.2019.05.001
Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625
C.J. Hassila, P. Harlin and U. WiklundWear 426-427 1837 (2019)
https://doi.org/10.1016/j.wear.2019.01.085
Fatigue properties of removable partial denture clasps fabricated by selective laser melting followed by heat treatment
Nuttaphon Kittikundecha, Yuka Kajima, Atsushi Takaichi, Hla Htoot Wai Cho, Hein Linn Htat, Hisashi Doi, Hidekazu Takahashi, Takao Hanawa and Noriyuki WakabayashiJournal of the Mechanical Behavior of Biomedical Materials 98 79 (2019)
https://doi.org/10.1016/j.jmbbm.2019.06.010
Data Mining for Mesoscopic Simulation of Electron Beam Selective Melting
Ya Qian, Wentao Yan and Feng LinEngineering (2019)
https://doi.org/10.1016/j.eng.2019.06.006
Modeling of additively manufactured materials using gradient-enhanced crystal plasticity
Andreas Kergaßner, Julia Mergheim and Paul SteinmannComputers & Mathematics with Applications 78 (7) 2338 (2019)
https://doi.org/10.1016/j.camwa.2018.05.016
Solidification simulation of direct energy deposition process by multi-phase field method coupled with thermal analysis
Yusuke Shimono, Mototeru Oba and Sukeharu NomotoModelling and Simulation in Materials Science and Engineering 27 (7) 074006 (2019)
https://doi.org/10.1088/1361-651X/ab3433
Mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy fabricated with selective electron beam melting
Kosuke Kuwabara, Hiroshi Shiratori, Tadashi Fujieda, et al.Additive Manufacturing 23 264 (2018)
https://doi.org/10.1016/j.addma.2018.06.006
Study of Formed Oxides in IN718 Alloy during the Fabrication by Selective Laser Melting and Electron Beam Melting
Hao Yu, Shigenari Hayashi, Koji Kakehi and Yen-Ling KuoMetals 9 (1) 19 (2018)
https://doi.org/10.3390/met9010019
Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5
Curtis Lee Frederick, Alexander Plotkowski, Michael M. Kirka, Michael Haines, Austin Staub, Edwin J. Schwalbach, David Cullen and S. S. BabuMetallurgical and Materials Transactions A 49 (10) 5080 (2018)
https://doi.org/10.1007/s11661-018-4793-y
A review of computational modeling in powder-based additive manufacturing for metallic part qualification
Jingfu Liu, Behrooz Jalalahmadi, Y.B. Guo, Michael P. Sealy and Nathan BolanderRapid Prototyping Journal 24 (8) 1245 (2018)
https://doi.org/10.1108/RPJ-04-2017-0058
Effect of microstructure on tensile properties of electrospark deposition repaired Ni-superalloy
Pablo D. Enrique, Zhen Jiao, Norman Y. Zhou and Ehsan ToyserkaniMaterials Science and Engineering: A 729 268 (2018)
https://doi.org/10.1016/j.msea.2018.05.049
Metal Alloys for Fusion‐Based Additive Manufacturing
Duyao Zhang, Shoujin Sun, Dong Qiu, Mark A. Gibson, Matthew S. Dargusch, Milan Brandt, Ma Qian and Mark EastonAdvanced Engineering Materials 20 (5) (2018)
https://doi.org/10.1002/adem.201700952
Single crystal plasticity – A mesoscale based approach for modeling the mechanics of additively manufactured Inconel 718
Andreas Kergaßner, Julia Mergheim and Paul SteinmannPAMM 18 (1) (2018)
https://doi.org/10.1002/pamm.201800389
Grain boundary network evolution in Inconel 718 from selective laser melting to heat treatment
Sharniece Holland, Xiaoqing Wang, X.Y. Fang, et al.Materials Science and Engineering: A 725 406 (2018)
https://doi.org/10.1016/j.msea.2018.04.045
Geometry dependent microstructures: bug or feature?
Jan Frederik Hagen, Michael Rasch, Stefanie Kohl and Michael SchmidtProcedia CIRP 74 724 (2018)
https://doi.org/10.1016/j.procir.2018.08.024
Solidification and Microstructural Control in Selective Electron Beam Melting of Co-29Cr-10Ni-7W Alloy
Minh A.L. Phan, Darren Fraser, Zhanwen Chen and Stefan GuliziaMaterials Science Forum 941 902 (2018)
https://doi.org/10.4028/www.scientific.net/MSF.941.902
Modeling of binary alloy solidification under conditions representative of Additive Manufacturing
M.R. Rolchigo and R. LeSarComputational Materials Science 150 535 (2018)
https://doi.org/10.1016/j.commatsci.2018.04.004
Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications
Michael M. Kirka, Alex Plotkowski, Peeyush Nandwana, et al.The Minerals, Metals & Materials Series, Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications 69 (2018)
https://doi.org/10.1007/978-3-319-89480-5_4
Modelling of anisotropic elastic properties in alloy 718 built by electron beam melting
Chamara Kumara, Dunyong Deng, Johan Moverare and Per NylénMaterials Science and Technology 34 (5) 529 (2018)
https://doi.org/10.1080/02670836.2018.1426258
Additive Manufacturing of Alloy 718 via Electron Beam Melting: Effect of Post-Treatment on the Microstructure and the Mechanical Properties
Arun Ramanathan Balachandramurthi, Johan Moverare, Satyapal Mahade and Robert PedersonMaterials 12 (1) 68 (2018)
https://doi.org/10.3390/ma12010068
Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing
Tien T. Roehling, Sheldon S.Q. Wu, Saad A. Khairallah, John D. Roehling, S. Stefan Soezeri, Michael F. Crumb and Manyalibo J. MatthewsActa Materialia 128 197 (2017)
https://doi.org/10.1016/j.actamat.2017.02.025
Quantitative texture prediction of epitaxial columnar grains in additive manufacturing using selective laser melting
Jian Liu and Albert C. ToAdditive Manufacturing 16 58 (2017)
https://doi.org/10.1016/j.addma.2017.05.005
Trends in Solidification Grain Size and Morphology for Additive Manufacturing of Ti-6Al-4V
Joy Gockel, Luke Sheridan, Sneha P. Narra, Nathan W. Klingbeil and Jack BeuthJOM 69 (12) 2706 (2017)
https://doi.org/10.1007/s11837-017-2601-6
Effect of Energy Input on Microstructure and Mechanical Properties of Titanium Aluminide Alloy Fabricated by the Additive Manufacturing Process of Electron Beam Melting
Ashfaq Mohammad, Abdulrahman Alahmari, Muneer Mohammed, Ravi Renganayagalu and Khaja MoiduddinMaterials 10 (2) 211 (2017)
https://doi.org/10.3390/ma10020211
Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
J. Raplee, A. Plotkowski, M. M. Kirka, R. Dinwiddie, A. Okello, R. R. Dehoff and S. S. BabuScientific Reports 7 (1) (2017)
https://doi.org/10.1038/srep43554
Localized Melt-Scan Strategy for Site Specific Control of Grain Size and Primary Dendrite Arm Spacing in Electron Beam Additive Manufacturing
Narendran Raghavan, Srdjan Simunovic, Ryan Dehoff, et al.Acta Materialia (2017)
https://doi.org/10.1016/j.actamat.2017.08.038
Overview on Additive Manufacturing Technologies
Flaviana Calignano, Diego Manfredi, Elisa Paola Ambrosio, et al.Proceedings of the IEEE 105 (4) 593 (2017)
https://doi.org/10.1109/JPROC.2016.2625098
ATu1C.3 (2017)
https://doi.org/10.1364/CLEO_AT.2017.ATu1C.3