Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Effects of alkali activator on the carbonation of one-part alkali-activated nickel slag cement

Xuefang Wang, Yuanhao Que, Shengxian Wang, Sixiang Kang, Wenquan Zheng, Liwei Xu and Wenda Wu
Journal of Sustainable Cement-Based Materials 14 (4) 627 (2025)
https://doi.org/10.1080/21650373.2024.2448820

Influence of novel activation techniques on mechanical and microstructural characteristics of alkali activated one-part binder

Yasmeen Qureshi, Biswajit Pal and S.K. Singh
Construction and Building Materials 475 141273 (2025)
https://doi.org/10.1016/j.conbuildmat.2025.141273

Effects of HVFA with the addition of bottom ash, NaOH, and CaCO3 on self-compacting concrete (SCC) in tidal environments

Juandra Hartono, Purwanto and Januarti Jaya Ekaputri
Case Studies in Construction Materials 22 e04593 (2025)
https://doi.org/10.1016/j.cscm.2025.e04593

Research on mix design and mechanical performances of MK-GGBFS based geopolymer pastes using central composite design method

Ziqi Yao, Ling Luo, Yongjun Qin, Jiangbo Cheng and Changwei Qu
Scientific Reports 14 (1) (2024)
https://doi.org/10.1038/s41598-024-59872-0

One-part alkali-activated GGBFS as a cement for enhancing compacted filtered iron ore tailings disposal by stacking

Nilo Cesar Consoli, Jessamine Pedroso de Oliveira, Andres Lotero, Hugo Carlos Scheuermann Filho and Victor Nuñéz
Transportation Geotechnics 48 101306 (2024)
https://doi.org/10.1016/j.trgeo.2024.101306

Fracture characteristics and microscopic mechanism of slag-based marine geopolymer mortar prepared with seawater and sea-sand

Zhiyuan Yang, Hong Zhu, Bai Zhang, Zhiqiang Dong and Guangcai Zhang
Construction and Building Materials 450 138561 (2024)
https://doi.org/10.1016/j.conbuildmat.2024.138561

Experimental and modelling analysis of waste material-based geopolymer concrete incorporated with crumb rubber particles

Ashwin Narendra Raut, Ahmad Alyaseen, Haytham F. Isleem, Mohammed Rihan Maaze, Afzal Husain Khan, Arunava Poddar, Ahmed Salih Mohammed and Parveen Sihag
Construction and Building Materials 453 138985 (2024)
https://doi.org/10.1016/j.conbuildmat.2024.138985

Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review

Qiang Fu, Mengxin Bu, Zhaorui Zhang, Wenrui Xu, Qiang Yuan and Ditao Niu
Engineering 20 162 (2023)
https://doi.org/10.1016/j.eng.2021.07.026

Workability, autogenous shrinkage and microstructure of alkali-activated slag/fly ash slurries: Effect of precursor composition and sodium silicate modulus

Ling Luo, Wu Yao, Guangwei Liang and Yu Luo
Journal of Building Engineering 73 106712 (2023)
https://doi.org/10.1016/j.jobe.2023.106712

State of the art review on supplementary cementitious materials in India – II: Characteristics of SCMs, effect on concrete and environmental impact

Sanchit Gupta and Sandeep Chaudhary
Journal of Cleaner Production 357 131945 (2022)
https://doi.org/10.1016/j.jclepro.2022.131945

Investigating the Properties of GGBFS Hazelnut Ash–Based Cement-Free Mortars Produced at Ambient Temperature under Different Curing Conditions

Ahmet Hayrullah Sevinç
Journal of Materials in Civil Engineering 34 (10) (2022)
https://doi.org/10.1061/(ASCE)MT.1943-5533.0004425

Optimization of alkali-activated ladle slag composites mix design using taguchi-based TOPSIS method

Omar Najm, Hilal El-Hassan and Amr El-Dieb
Construction and Building Materials 327 126946 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.126946

Alkali activated slag cement doped with Zn-rich electric arc furnace dust

Irena Nikolić, Dijana Đurović, Smilja Marković, Liljana Veselinović, Ivona Janković-Častvan, Vuk V. Radmilović and Velimir R. Radmilović
Journal of Materials Research and Technology 9 (6) 12783 (2020)
https://doi.org/10.1016/j.jmrt.2020.09.024