Fire spalling of concrete – A historical overview
MATEC Web of Conferences, 6 (2013) 01001
Published online: 2013-09-17
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Synergistic Effects of Mechanical Load and Water Content on Fire Behavior of Compressed Earth Bricks
Rafik Abdallah, Hassan Alaa Eddine, Sourour Elleuch and Hélène CarréFire and Materials 50 (1) 38 (2026)
https://doi.org/10.1002/fam.70015
Strengthening Fire-Damaged Lightweight Concrete T-Beams Using Engineered Cementitious Composite with Basalt Fiber-Reinforced Polymer Grid
Haider M. Al-Baghdadi and Mohammed M. KadhumFibers 13 (1) 7 (2025)
https://doi.org/10.3390/fib13010007
Investigating the underlying causes of thermal instability in compressed earth bricks
Rafik Abdallah, Hélène Carré, Céline Perlot, Christian La Borderie and Hayssam El GhocheMaterials and Structures 58 (9) (2025)
https://doi.org/10.1617/s11527-025-02845-0
Spalling by Repeated Forest Fires can Mimic Inselberg Flared Slope Profiles
Jacob Monahan, Yida Zhang and Robert S. AndersonJournal of Geophysical Research: Earth Surface 130 (10) (2025)
https://doi.org/10.1029/2025JF008628
The impact of blended cements on the spalling behavior of concrete at elevated temperatures: a review
Tim Pittrich, Frank Weise and Ludwig StelznerMaterials and Structures 58 (5) (2025)
https://doi.org/10.1617/s11527-025-02713-x
Assessment of fire-induced spalling in stainless steel reinforced concrete with recycled steel tyre microfibres
Yifan Li, Katherine A. Cashell, Harris Angelakopoulos and Shan-Shan HuangConstruction and Building Materials 485 141803 (2025)
https://doi.org/10.1016/j.conbuildmat.2025.141803
Enhancing the recovery of cement-rich powder from recycled fine aggregates through thermal shock
Abraham T. Gebremariam, Ali Vahidi, Francesco Di Maio, Cheng Chang and Peter RemCase Studies in Construction Materials 23 e05272 (2025)
https://doi.org/10.1016/j.cscm.2025.e05272
Experimental Investigation of Standardized Conditioning and Representative Accelerated Drying Protocols Impact on Concrete Spalling
Takwa Sayari, Siyimane Mohaine, Tulio Honorio, Fabienne Robert, Farid Benboudjema, François Cussigh, Sandrine Chanut, Laetitia D'Aloia, Sébastien Bouteille and Philippe GottelandFire and Materials 49 (4) 417 (2025)
https://doi.org/10.1002/fam.3291
Effect of compaction pressure on the risk of thermal instability of compressed earth bricks
Rafik Abdallah, Hélène Carré and Fionn McGregorMaterials and Structures 57 (4) (2024)
https://doi.org/10.1617/s11527-024-02348-4
Effect of uniaxial loading on the spalling of concrete panels for Melbourne's Metro Tunnel Project
Maurice Guerrieri, Duffy Lee, Vern Lee and Luke HainesStructural Concrete 25 (3) 1676 (2024)
https://doi.org/10.1002/suco.202200556
Determination of Strain and Stress Field in Screening Test for Concrete Fire Spalling—Passive Restraint Effect
Katarzyna Mróz, Izabela Hager, Marcin Tekieli, Václav Kočí and João Castro-GomesMaterials 17 (24) 6210 (2024)
https://doi.org/10.3390/ma17246210
Computational multiscale modelling of thermally induced dehydration of blended hardened cement paste
Simon Peters and Günther MeschkeCement and Concrete Research 180 107485 (2024)
https://doi.org/10.1016/j.cemconres.2024.107485
Performance of geopolymer concrete at elevated temperature − A critical review
Tawzia Manzoor, Javed Ahmad Bhat and Asif H. ShahConstruction and Building Materials 420 135578 (2024)
https://doi.org/10.1016/j.conbuildmat.2024.135578
A review of test Methods, issues and challenges of Large-Scale fire testing of concrete tunnel linings
Wei Ming Lee, Sam Fragomeni, Hugh Monckton and Maurice GuerrieriConstruction and Building Materials 392 131901 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.131901
Statistical Review of the Fire Resistance of Concrete Columns
Shujaat Hussain Buch and Umesh Kumar SharmaArabian Journal for Science and Engineering 48 (4) 5005 (2023)
https://doi.org/10.1007/s13369-022-07245-y
Heat-Induced Spalling of Concrete: A Review of the Influencing Factors and Their Importance to the Phenomenon
Hussein Mohammed, Hawreen Ahmed, Rawaz Kurda, Rayed Alyousef and Ahmed Farouk DeifallaMaterials 15 (5) 1693 (2022)
https://doi.org/10.3390/ma15051693
Behaviour of Reinforced Concrete Walls Under Fire: A Review
Ibrahim Almeshal, B. H. Abu Bakar and Bassam A. TayehFire Technology 58 (5) 2589 (2022)
https://doi.org/10.1007/s10694-022-01240-3
One-Year Push-Off specimens using cocktail and polymeric fibres at elevated temperatures
Naser S. Alimrani, Gyorgy L. Balazs and Nabil AbdelmelekStructures 41 128 (2022)
https://doi.org/10.1016/j.istruc.2022.04.075
Verifying domain knowledge and theories on Fire-induced spalling of concrete through eXplainable artificial intelligence
Mohammad Khaled al-Bashiti and M.Z. NaserConstruction and Building Materials 348 128648 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.128648
Discovering Graphical Heuristics on Fire-Induced Spalling of Concrete Through Explainable Artificial Intelligence
Arash Teymori Gharah Tapeh and M. Z. NaserFire Technology 58 (5) 2871 (2022)
https://doi.org/10.1007/s10694-022-01290-7
Existing theories of concrete spalling and test methods relating to moisture migration patterns upon exposure to elevated temperatures – A review
Thathsarani Kannangara, Paul Joseph, Sam Fragomeni and Maurice GuerrieriCase Studies in Construction Materials 16 e01111 (2022)
https://doi.org/10.1016/j.cscm.2022.e01111
One-year push-off specimens using cocktail and polymeric fibres at elevated temperatures
Naser Alimrani, Gyorgy Balazs and Nabil AbdelmelekJournal of Structural Fire Engineering (2022)
https://doi.org/10.1108/JSFE-01-2022-0004
Explosive Spalling Behavior of Single-Sided Heated Concrete According to Compressive Strength and Heating Rate
Euichul Hwang, Gyuyong Kim, Gyeongcheol Choe, Minho Yoon, Minjae Son, Dongkyun Suh, Hamin Eu and Jeongsoo NamMaterials 14 (20) 6023 (2021)
https://doi.org/10.3390/ma14206023
Reduction of fire spalling of concrete with small doses of polypropylene fibres
Robert McNamee, Johan Sjöström and Lars BoströmFire and Materials 45 (7) 943 (2021)
https://doi.org/10.1002/fam.3005
Cross‐comparison of screening tests for fire spalling of concrete
Siyimane Mohaine, Lars Boström, Maxime Lion, Robert McNamee and Fabienne RobertFire and Materials 45 (7) 929 (2021)
https://doi.org/10.1002/fam.2946
171 (2021)
https://doi.org/10.1016/B978-0-323-85856-4.00009-1
Feasibility Study of Digital Image Correlation in Determining Strains in Concrete Exposed to Fire
Katarzyna Mróz, Marcin Tekieli and Izabela HagerMaterials 13 (11) 2516 (2020)
https://doi.org/10.3390/ma13112516
Design of the metro tunnel project tunnel linings for fire testing
Maurice Guerrieri, Carlos Sanabria, Wei Ming Lee, Esteban Pazmino and Rahul PatelStructural Concrete 21 (6) 2452 (2020)
https://doi.org/10.1002/suco.202000140
Effects of Recycled Steel and Polymer Fibres on Explosive Fire Spalling of Concrete
Fabio P. Figueiredo, Shan-Shan Huang, Harris Angelakopoulos, Kypros Pilakoutas and Ian BurgessFire Technology 55 (5) 1495 (2019)
https://doi.org/10.1007/s10694-019-00817-9
Performance of Segmental Post-Τensioned Concrete Beams Exposed to High Fire Temperature
H. M. Hekmet and A. F. IzzetEngineering, Technology & Applied Science Research 9 (4) 4440 (2019)
https://doi.org/10.48084/etasr.2864
Durability of shotcrete for underground support– Review and update
Isabel Galan, Andre Baldermann, Wolfgang Kusterle, Martin Dietzel and Florian MittermayrConstruction and Building Materials 202 465 (2019)
https://doi.org/10.1016/j.conbuildmat.2018.12.151
Limestone-siliceous and siliceous concretes thermal damaging at high temperature
H. Mastori, P. Piluso, J.-F. Haquet, R. Denoyel and M. AntoniConstruction and Building Materials 228 116671 (2019)
https://doi.org/10.1016/j.conbuildmat.2019.08.052
Effect of spalling on predicted temperature gradients and flexural capacity: numerical model
Hitesh Lakhani and Jan HofmannJournal of Structural Fire Engineering 11 (2) 151 (2019)
https://doi.org/10.1108/JSFE-01-2019-0010
Determination of Physico-Mechanical Properties and High Temperature Behavior of Stressed Reinforcing Steels
Gökhan KürklüProtection of Metals and Physical Chemistry of Surfaces 55 (5) 924 (2019)
https://doi.org/10.1134/S2070205119050095
Spalling of Large-Scale Walls Exposed to a Hydrocarbon Fire
Maurice Guerrieri and Sam FragomeniJournal of Materials in Civil Engineering 31 (11) 04019249 (2019)
https://doi.org/10.1061/(ASCE)MT.1943-5533.0002828
Effect of curing temperature on the behaviour of UHPFRC at elevated temperatures
Charles Kahanji, Faris Ali, Ali Nadjai and Naveed AlamConstruction and Building Materials 182 670 (2018)
https://doi.org/10.1016/j.conbuildmat.2018.06.163
Specimens size, aggregate size, and aggregate type effect on spalling of concrete in fire
A. Z. Mohd Ali, Jay Sanjayan and Maurice GuerrieriFire and Materials 42 (1) 59 (2018)
https://doi.org/10.1002/fam.2457
Response of concrete cast in permeable moulds to severe heating
Oliver Richards, Ieuan Rickard, John Orr and Luke BisbyConstruction and Building Materials 160 526 (2018)
https://doi.org/10.1016/j.conbuildmat.2017.11.097
Concrete propensity to fire spalling: testing and observations
Izabela Hager, Katarzyna Mróz, Tomasz Tracz, I. Hager and T. TraczMATEC Web of Conferences 163 02004 (2018)
https://doi.org/10.1051/matecconf/201816302004
Effect of Aggregate Size on the Spalling of High-Strength Wall Panels Exposed to Hydrocarbon Fire
A. Z. Mohd Ali, Jay Sanjayan and Maurice GuerrieriJournal of Materials in Civil Engineering 29 (12) (2017)
https://doi.org/10.1061/(ASCE)MT.1943-5533.0002087
Fire Protection of Concrete Tunnel Linings with Waste Tyre Fibres
Fabio P. Figueiredo, Asif Hussain Shah, Shan-Shan Huang, et al.Procedia Engineering 210 472 (2017)
https://doi.org/10.1016/j.proeng.2017.11.103
Comparative Study of Concrete Panels’ Fire Resistance
Augusto Gil, Fernanda Pacheco, Roberto Christ, et al.ACI Materials Journal 114 (5) (2017)
https://doi.org/10.14359/51689715
Fire Resistance and Post-fire Seismic Behavior of High Strength Concrete Shear Walls
Jianzhuang Xiao, Qinghai Xie, Zhiwei Li and Wan WangFire Technology 53 (1) 65 (2017)
https://doi.org/10.1007/s10694-016-0582-6
Sandwich panels with high performance concrete thin plates at elevated temperatures: numerical studies
Thomas Hulin, Kamil Hodicky, Jacob W. Schmidt and Henrik StangMaterials and Structures 49 (8) 3177 (2016)
https://doi.org/10.1617/s11527-015-0712-5
Temperature Calculation in Fire Safety Engineering
Ulf WickströmTemperature Calculation in Fire Safety Engineering 217 (2016)
https://doi.org/10.1007/978-3-319-30172-3_14
Fire Performance of Sustainable Recycled Concrete Aggregates: Mechanical Properties at Elevated Temperatures and Current Research Needs
John Gales, Thomas Parker, Duncan Cree and Mark GreenFire Technology 52 (3) 817 (2016)
https://doi.org/10.1007/s10694-015-0504-z
High temperature behaviour of a wide petrographic range of siliceous and calcareous aggregates for concretes
Rijaniaina Niry Razafinjato, Anne-Lise Beaucour, Ronan L. Hebert, Béatrice Ledesert, Raphaël Bodet and Albert NoumoweConstruction and Building Materials 123 261 (2016)
https://doi.org/10.1016/j.conbuildmat.2016.06.097
Advances in Structural Engineering
Asif H. Shah, Umesh K. Sharma, Pradeep Bhargava, et al.Advances in Structural Engineering 2259 (2015)
https://doi.org/10.1007/978-81-322-2187-6_171
The effect of various fire-exposed surface dimensions on the spalling of concrete specimens
Steve Werner and Andreas RoggeFire and Materials 39 (5) 545 (2015)
https://doi.org/10.1002/fam.2256
Fire spalling of concrete – A historical overview
R. Jansson, P. Pimienta and F. MeftahMATEC Web of Conferences 6 01001 (2013)
https://doi.org/10.1051/matecconf/20130601001