| Issue |
MATEC Web Conf.
Volume 340, 2021
VII International Russian - Kazakhstan Conference “Chemical Technologies of Functional Materials” (RKFM 2021)
|
|
|---|---|---|
| Article Number | 01048 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/matecconf/202134001048 | |
| Published online | 08 July 2021 | |
Synthesis of porous ceramics for ceramic biosensors
Institut of Solid State Chemistry and Mechanochemistry, SB RAS, 630090, Russian Federation
一 Corresponding author: V.Khusnutdinov@gmail.com
Highly porous ceramic materials with open porosity are perspective for manufacture of the biosensors. Those materials are used as a framework and open porosity allows to inject a necessary functional components into internal volume. Electroconductive highly porous ceramics on a base of La1-xCaxMnO3 with variable composition have acceptable hardness and relatively low sintering temperature (about 1450°C). In recent work samples of highly porous ceramic with the composition of La1-xCaxMnO3 (x=0.3, 0.5 and 0.7) were obtained by impregnating a carbon nonwoven material with a slip containing pre-synthesized compounds of the desired composition, followed by annealing at 1415-1450îÑ. Obtained materials according to the scanning electron microscopy data have a pore size of up to 100 µm. The conductivity is 0.5-2.5 S/cm.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.