| Issue |
MATEC Web Conf.
Volume 331, 2020
International Conference on Urban Disaster Resilience (ICUDR 2019)
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 10 | |
| Section | Renewable Energy | |
| DOI | https://doi.org/10.1051/matecconf/202033103004 | |
| Published online | 09 December 2020 | |
Synchronous Buck Converter for Improved Maximum Power Extraction on Small Stand-Alone Wind Power System using Modified perturb and observe (P&O)
Department of Electrical Engineering, Tadulako University, Palu
* Corresponding author: irwan.mahmudi@untad.ac.id
To increase the extraction power of a wind power system, the system must work at peak power. This paper presents maximum power extraction and control systems using a modified perturb and observe algorithm (MP&O) to achieve high efficiency maximum power extraction of wind turbines that connected to permanent magnet synchronous generators (PMSG). To get maximum power from PMSG, MP&O controls the duty cycle of synchronous buck based on the output power of the 12 pulses rectifier. The simulation results show that MP&O can work optimally at every change of wind speed. MP&O was also tested and compared with simple P&O in terms of ripples under stable conditions, response speed and ability to obtain maximum energy output. The average efficiency and convergence time achieved by MP&O are 99. 24% and 0. 71s.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.