| Issue |
MATEC Web Conf.
Volume 243, 2018
XIV International Workshop High Energy and Special Materials: Demilitarization, Antiterrorism and Civil Application (HEMs-2018)
|
|
|---|---|---|
| Article Number | 00026 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/201824300026 | |
| Published online | 05 December 2018 | |
Manufacturing sound-absorbing structures by 3d-printing
Perm national research polytechnic university, 614990, Komsomolskii ave., 29, Russia, Perm
In this research we developed the methods and technologies for manufacturing sound-absorbing structures (SAS) samples using Dimension SST 1200 and Envisiontec Perfactory XEDE units. While testing the technique, the shortcomings of both units were identified. To eliminate the identified shortcomings, we formulated some recommendations and adjusted the main stages of manufacturing SAS with the application of these methods. Experimental acoustic studies of the produced reference samples of the SAS on an interferometer with normal incidence of waves were carried out. Acoustic tests of samples of SAS manufactured with consideration of the developed technological solutions showed good sustainability of the obtained results, we revealed strong correlation with the samples from polymer composite materials manufactured using standard plant technologies.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.