| Issue |
MATEC Web Conf.
Volume 225, 2018
UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018)
|
|
|---|---|---|
| Article Number | 02010 | |
| Number of page(s) | 7 | |
| Section | Energy Enhancement and Optimization | |
| DOI | https://doi.org/10.1051/matecconf/201822502010 | |
| Published online | 05 November 2018 | |
The Effect of Tube Length, Cold Exit Diameter and Working Gas on The Cold Flow Temperature of Vortex Tube
1
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600, Pekan, Pahang.
* Corresponding author: fadhli.suhaimi@yahoo.com
A vortex tube is a simple device which works as a refrigerator, also known as Ranque Vortex Tube, Hilsch Vortex Tube, and Ranque–Hilsch vortex tube. It is used to obtain desired hot and cold gas and is widely used for spot cooling in industry. In vortex tube, the effect of geometrical parameters on the cold flow temperature of vortex tube is still unclear, and effect of certain working gas is unidentified. Hence, the objective of this analysis is to determine the effect of length of the vortex tube, cold exit diameter and different working gas. 3 different tube lengths, 3 different cold exit diameters, and 8 different types of gas are used. Simflow, which is free software, is selected to analyse the effect numerically. From the results, it is clear that the optimum tube length, cold exit diameter, and working gas are L = 175 mm, d = 4 mm and helium, respectively.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.