| Issue |
MATEC Web Conf.
Volume 210, 2018
22nd International Conference on Circuits, Systems, Communications and Computers (CSCC 2018)
|
|
|---|---|---|
| Article Number | 02030 | |
| Number of page(s) | 7 | |
| Section | Systems | |
| DOI | https://doi.org/10.1051/matecconf/201821002030 | |
| Published online | 05 October 2018 | |
Analysis of dataflows within industrial control system design
1
Department of Cybernetics and Biomedical Engineering, VSB-Technical University of Ostrava, Ostrava-Poruba 70833
2
ELVAC a.s., Hasicska 53, 700 30 Ostrava, Czech Republic
* e-mail: jiri.koziorek.vsb.cz
A design of industrial control system is a complex process which is usually divided into specific design steps. Results from antecedent step are generally inputs for the next step and there could be also other influences among steps. So there is a strong dataflow within an automation project especially if the range of designed system is large from the point of view of the signals count, components, variables, alarms and other messages etc. The ability of effective and reliable data transfer between the steps has significant influence on effectivity and quality of the design of an industrial control system. The main goal of the paper is an analysis of the design steps during the industrial control system design, definition of the dataflows between particular steps and description of a concept of automated system for data transmission within the design. The proposed concept is presented and evaluated on pilot industrial control system design project.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.