| Issue |
MATEC Web Conf.
Volume 208, 2018
2018 3rd International Conference on Measurement Instrumentation and Electronics (ICMIE 2018)
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 4 | |
| Section | Modern Electronic System & Measurement and Control Technology | |
| DOI | https://doi.org/10.1051/matecconf/201820803004 | |
| Published online | 26 September 2018 | |
Influence of measuring force on CMM accuracy
Research Institute of Physical and Chemical Engineering of Nuclear Industry, Tianjin, China
The measuring accuracy of CMM (Coordinate Measuring Machine) is influenced by many factors, such as temperature, humidity, measuring force and method of signal acquisition. For thin parts, the influence of measuring force is especially obvious. In this paper, the relationship between measuring force and measurement accuracy is studied for a thin part with a U-shaped cross-section. By analyzing the structure of the probe and establishing the force model, the influencing factors of the accuracy of CMM are obtained, and the influence of the contact deformation and the bending deformation on the measurement accuracy is analyzed from the point of view of material mechanics. At the same time, the measurement accuracy of different measuring cross-sections is analyzed. Through the research of this paper, the relationship between measuring force and CMM is established, and an effective method to improve the accuracy of CMM is also found.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.