Issue |
MATEC Web Conf.
Volume 199, 2018
International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2018)
|
|
---|---|---|
Article Number | 07012 | |
Number of page(s) | 7 | |
Section | Repair Materials and Systems | |
DOI | https://doi.org/10.1051/matecconf/201819907012 | |
Published online | 31 October 2018 |
Investigation in Remediation of Wind Turbine Generator (WTG) Foundations with Epoxy Resin
Vestas Deutschland GmbH, WTG Engineering & Support, Kapstadtring 7, 22297 Hamburg, Germany
* Corresponding author: kabod@vestas.com
This article shows the principle requirements for remediation of WTG foundations and the advantages and disadvantages of different injection materials like cement lime, epoxy resin and PUR resin. Mostly there are reservations against epoxy resin mainly because of assuming wet cracks in foundations. Regarding state of the art epoxy resins are not usable at wet surfaces or for cracks with liquid water inside. It will be shown that nevertheless it can work and why it works. There were done some basic investigations in how to fill a crack/gap between two concrete slabs. The gap was filled with water or a suspension to simulate a wet crack surface. The spread of an Epoxy resin in the gap was investigated.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.