| Issue |
MATEC Web Conf.
Volume 194, 2018
Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC-2018)
|
|
|---|---|---|
| Article Number | 01030 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/201819401030 | |
| Published online | 21 August 2018 | |
The effect of the liquid layer thickness on the evaporation intensity
1
Novosibirsk State University, 630090 Novosibirsk, Russia
2
Kutateladze Institute of Thermophysics, 630090 Novosibirsk, Russia
3
National Research Tomsk Polytechnic University, 634050 Tomsk, Russia
* Corresponding author: alexy.slav@yandex.ru
An experimental study of the influence of thermo-capillary forces and shear stresses with the side of the gas flow to the evaporation flow rate has been made. The experiments were carried out at various thicknesses of the liquid layer and constant gas velocity. The influence of the thickness of the liquid layer on the evaporation flow rate (the intensity of evaporation) has been analyzed. It is shown that the thermocapillary forces have a direct effect on the evaporation flow rate of the liquid layer.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.