| Issue |
MATEC Web Conf.
Volume 192, 2018
The 4th International Conference on Engineering, Applied Sciences and Technology (ICEAST 2018) “Exploring Innovative Solutions for Smart Society”
|
|
|---|---|---|
| Article Number | 01031 | |
| Number of page(s) | 4 | |
| Section | Track 1: Industrial Engineering, Materials and Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201819201031 | |
| Published online | 14 August 2018 | |
Conversion of metal-organic halide perovskite from PbI2 precursor films grown by hot-wall method
National Institute of Technology, Ishikawa College, Tsubata, Kahoku, Ishikawa, 929-0392, Japan
*
Corresponding author : seto@ishikawa-nct.ac.jp
We report on metal-organic halide perovskite CH3NH3PbI3 films converted from PbI2 precursors for planar heterojunction perovskite solar cells. PbI2 films as a precursor were deposited by hot-wall method and conventional vacuum evaporation. The conversion to perovskite phase from the PbI2 films were performed by annealing in methyl ammonium iodine (MAI) vapour at 120-150 °C. We confirmed that no residual PbI2 phase can be detected in the converted perovskite films by x-ray diffraction measurements. The surface morphology of the perovskite films was measured by AFM. Roughness Ra of the films is 17.8 nm, which is comparable value to the reported ones. Using the converted perovskite films we fabricated tentative perovskite solar cells with a device architecture of ITO/PEDOT:PSS/Perovskite/C60/Ag. The power conversion efficiencies of the fabricated solar cells from a conventional evaporation and the hot-wall method exhibited 2.22 and 2.33%, respectively.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.