| Issue |
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
|
|
|---|---|---|
| Article Number | 22027 | |
| Number of page(s) | 5 | |
| Section | Posters | |
| DOI | https://doi.org/10.1051/matecconf/201816522027 | |
| Published online | 25 May 2018 | |
Research of crack initiation in tension test specimen made of nickel alloy EI961sh
Central Institute of Aviation Motors, Strength and dynamics Department, 111116, Russia
In this paper method of numerical computations using explicit scheme, implemented in LSDyna (Ansys) software complex, is introduced and verified. Obtained solution explains experimental fact mentioned by P. Ludwik, that cracking in cylindrical test specimen made of plastic material starts in the middle of the smallest cross-section of the specimen. Introduced method allows verifying law, obtained by N.N. Davidenkov during unique experimental research in which he studied logarithmic strain in specimen’s neck by pickling of cross-sections in this zone. Additionally it is possible to estimate amount of heat, generated during rupture of specimen, using obtained solution and law of conservation of energy. For this purpose tensile tests, in which thermal camera was used for temperature measuring, were conducted. It was shown, that all deformation energy apart from elastic and shape-forming energy in volume element, calculated in the moment before rupture is transformed to heat. Also tensile tests with various rate of loading were conducted for more detailed research of rupture process.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.