Issue |
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
|
|
---|---|---|
Article Number | 22008 | |
Number of page(s) | 5 | |
Section | Posters | |
DOI | https://doi.org/10.1051/matecconf/201816522008 | |
Published online | 25 May 2018 |
Effect of Temperature on Strawbale Wall Rendered with Laterite and Clay Nanoparticle
Department of Civil Engineering, Faculty of Engineering and Technology, University of Ilorin, Nigeria
* Corresponding author: aaadeji@unilorin.edu.ng
In this study, the influence of the plastering materials on the thermal performance of three (3) straw bale building models were evaluated. The plastering materials considered are laterite mortal, laterite mortal with nanoparticle clay screeding and cement-sand mortal. The results were based on the experimentally measured thermal conductance, thermal resistance and thermal transmittance of the building model according to ASTM C1045-90 standard specification. The analysis of the measured data revealed that the laterite plaster significantly improve the thermal resistivity of the building model compared to cementsand mortal. However, clay nano particle screeding on the laterite plaster does not significantly affect the thermal performance of the straw bale building model.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.