Issue |
MATEC Web Conf.
Volume 110, 2017
International Youth Scientific Conference “Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment” (HMTTSC 2017)
|
|
---|---|---|
Article Number | 01012 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/matecconf/201711001012 | |
Published online | 19 June 2017 |
Experimental Setup For Study of Drop Deformation In Air Flow
1 National Research Tomsk State University, 634050 Tomsk, Russia
2 Federal Research Center for Cool and Cool Chemistry of Siberian Branch of the Russian Academy of Sciences, 650000 Kemerovo, Russia
* Corresponding author: tarm@niipmm.tsu.ru
Experimental study for study of deformation of drops in air flow is considered. Experimental setup includes a module for obtaining the drops, an air flow system and measuring system. Module for formation of drops is in the form of vertically arranged dropper with capillary with the possibility of formation of fixed drops. Air flow supply system comprises an air pump coupled conduit through a regulating valve with a cylindrical pipe, installed coaxially with dropper. The measuring system includes the video camera located with possibility of visualization of drop and the Pitot gage for measurement of flow rate of air located in the output section of branch pipe. This experimental setup allows to provide reliable and informative results of the investigation of deformation of drops in the air flow.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.