Issue |
MATEC Web Conf.
Volume 78, 2016
2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016)
|
|
---|---|---|
Article Number | 01100 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/matecconf/20167801100 | |
Published online | 07 October 2016 |
Green Roof Technology- Mitigate Urban Heat Island (UHI) Effect
School of Environmental Engineering, Universiti Malaysia Perlis (UniMAP), Kompleks Pusat Pengajian Jejawi 3, 02600 Arau, Perlis, Malaysia
* Corresponding author: zaity@unimap.edu.my
Alterations on the land surfaces, which are attributed by human activities, especially in cities, cause many implications to the ecosystem. The increase of buildings in cities is reflecting the growth of human activities resulted in a significant temperature increase and warmer pattern in the urban area than the surrounding countryside. The phenomenon defined as urban heat island. This study investigates the application and efficiency of the green roof as an approach to mitigate urban heat island and reducing indoor temperature in a building. Two types of roof models, which consist of vegetative roof and non-vegetative roof, were built to investigate the efficiency of vegetated roof in reducing indoor temperature compared to the non-vegetated roof. The outdoor and indoor temperature and humidity of each roof model were monitored by using RH520 Thermo Hygrometer. The data was collected for three times in a week for 9 weeks at 9:00am to 5:00pm. It was found that the indoor average temperature data for vegetative roof could be reduced 2.4°C from the outdoor average temperature and 0.8°C for non-vegetative roof. The difference of temperature reduction for vegetative roof was greater than the nonvegetative roof, thus indicate that green roof was highly efficient in reducing indoor temperature and mitigate urban heat island impact.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.