| Issue |
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
|
|
|---|---|---|
| Article Number | 06037 | |
| Number of page(s) | 5 | |
| Section | Chapter 6 Materials Science | |
| DOI | https://doi.org/10.1051/matecconf/20166706037 | |
| Published online | 29 July 2016 | |
Material Compressing Test of the High Polymer Part Used in Draft Gear of Heavy Load Locomotive
1 School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China
2 Zhongche Datong Electric Power Locomotive Limited Company, Datong 037038, China
3 Taizhou Duobang Polymer Science and Technology Limited Company, Taizhou 318020, China
a weiyg@djtu.edu.cn
b 460815759@qq.com
c songyax@163.com
d 2934474457@qq.com
According to the actual load cases of heavy load locomotive, the material compressing tests of the high polymer parts used in the locomotive are researched. The relationship between stress and strain during the material compressing are acquired by means of comparing the many results of the material compressing tests under different test condition. The relationship between stress and strain during the material compressing is nonlinear in large range of strain, but the relationship is approximately linear in small range of strain. The material of the high polymer made in China and the material of the high polymer imported are compared through the tests. The results show that the compressing property of the material of the high polymer made in China and the material of the high polymer imported are almost same. The research offers the foundation to study the structure elasticity of the draft gear.
Key words: Compressing Test / High polymer / Draft gear / Locomotive
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.