Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Preparation of mono-sized high sphericity Al-Si alloy particles for thermal energy storage materials by pulsated orifice ejection method

Yunxiu Lian, Wei Dong and Fumin Xu
Powder Technology 440 119789 (2024)
https://doi.org/10.1016/j.powtec.2024.119789

Analysis of Features of Heat Transfer during Crystallization of Aluminum Alloy Granules in a Water and Water–Steam Environment

M. V. Zharov
Inorganic Materials: Applied Research 15 (1) 199 (2024)
https://doi.org/10.1134/S2075113324010313

Influence of Temperature on the Process of Preparing Homogenised Magnesium-Zinc Alloy Spherical Powders Using the Relative Vacuum Method

Hong-xuan Liu, Ting-an Zhang and Jing-zhong Xu
Vacuum 113249 (2024)
https://doi.org/10.1016/j.vacuum.2024.113249

Analyzing the Phase Evolution, Microstructure and Wear Response of Spark Plasma Sintered Al0.5CoCrFeNi2 High Entropy Superalloy

Abhishek Tikar, Shubhankar Padwal, Shih-Hsun Chen and Sandip P. Harimkar
Advanced Engineering Materials 25 (9) (2023)
https://doi.org/10.1002/adem.202201523

Atomization of metal and alloy powders: Processes, parameters, and properties

Shaun Zhang Soong, Wing Lam Lai and Andrew Ng Kay Lup
AIChE Journal 69 (11) (2023)
https://doi.org/10.1002/aic.18217

Effect of Powder Characteristics on Relative Density and Porosity Formation During Electron Beam Selective Melting of Al2024 Aluminum Alloy

Mohammad Saleh Kenevisi and Feng Lin
Journal of Manufacturing Science and Engineering 145 (5) (2023)
https://doi.org/10.1115/1.4056665

Analysis of technological processes of production of spherical powders and granules of NiAl nickel monoaluminide for the needs of domestic engine building

M. V. Zharov
Voprosy Materialovedeniya (3(111)) 29 (2022)
https://doi.org/10.22349/1994-6716-2022-111-3-29-40

Taxonomy on the production processes and characterization of powder metallurgy used in additive manufacturing process

Onuchukwu Godwin Chike, Norhayati Binti Ahmad and Uday Basheer Al-Naib
Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu (6) 52 (2022)
https://doi.org/10.33271/nvngu/2022-6/052

Processes of Obtaining Granular Materials from Al–Zn–Mg–Cu Aluminum Alloys Using Ultra-Fast Granular Crystallization

M. V. Zharov
Metallurgist 66 (3-4) 276 (2022)
https://doi.org/10.1007/s11015-022-01327-w

Modeling and analysis of the plasma primary atomization for controllable preparation of high-quality spherical metal powders

Qingbo Zhang, Deping Yu, Peng Zhang, et al.
Journal of Materials Processing Technology 309 117753 (2022)
https://doi.org/10.1016/j.jmatprotec.2022.117753

Effect of the Thermal and Gasdynamic Characteristics of a Plasma Metallization Jet during Coating Formation

I. N. Kravchenko, A. L. Galinovskii, S. A. Velichko, et al.
Russian Metallurgy (Metally) 2022 (12) 1554 (2022)
https://doi.org/10.1134/S003602952212014X

Complex Simulation of a Hydraulic Structure Made of Electroelastic Materials

K. N. Makarov, E. E. Yurchenko and E. K. Biryukbaev
Power Technology and Engineering 56 (1) 19 (2022)
https://doi.org/10.1007/s10749-023-01465-4

New Design of Conduit Plasma Atomization for Fabricating Spherical Metal Powder and its Optimization Using Design of Experiments Method

Dharmanto, Ario Sunar Baskoro, Sugeng Supriadi and Bambang Suharno
Powder Metallurgy and Metal Ceramics 60 (9-10) 531 (2022)
https://doi.org/10.1007/s11106-022-00266-0

Investigating the morphology, hardness, and porosity of copper filters produced via Hydraulic Pressing

Hasan Ayub, Lehar Asip Khan, Eanna McCarthy, et al.
Journal of Materials Research and Technology 19 208 (2022)
https://doi.org/10.1016/j.jmrt.2022.05.012

Focusing plasma jets to achieve high current density: Feasibility and opportunities for applications in debris removal and space exploration

Igor Levchenko, Oleg Baranov, Jinghua Fang, et al.
Aerospace Science and Technology 108 106343 (2021)
https://doi.org/10.1016/j.ast.2020.106343

Preventing Evaporation Products for High-Quality Metal Film in Directed Energy Deposition: A Review

Kang-Hyung Kim, Chan-Hyun Jung, Dae-Yong Jeong and Soong-Keun Hyun
Metals 11 (2) 353 (2021)
https://doi.org/10.3390/met11020353

Experimental and Numerical Analysis of a Reverse-polarity Plasma Torch for Plasma Atomization

Zhengxin Yin, Deping Yu, Qingbo Zhang, Shengyuan Yang and Tong Yang
Plasma Chemistry and Plasma Processing 41 (5) 1471 (2021)
https://doi.org/10.1007/s11090-021-10181-8

Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications

Sovann Khan, Ken-ichi Katsumata, Vicente Rodríguez-González, Chiaki Terashima and Akira Fujishima
Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 953 (2021)
https://doi.org/10.1007/978-3-030-36268-3_10

Controlling factors determining flowability of powders for additive manufacturing: A combined experimental and simulation study

Yufan Zhao, Yujie Cui, Yusaku Hasebe, et al.
Powder Technology 393 482 (2021)
https://doi.org/10.1016/j.powtec.2021.08.006

Suppression and Recovery of Martensitic Transformation and Magnetism in Mechanically and Thermally Treated Magnetic Shape‐Memory Ni−Mn−Ga Melt‐Spun Ribbons

Paweł Czaja, Robert Chulist, Anna Wójcik, Maciej Kowalczyk, Przemysław Zackiewicz, Arkadiusz Szewczyk, Norbert Schell and Wojciech Maziarz
Advanced Engineering Materials 23 (11) (2021)
https://doi.org/10.1002/adem.202100075

Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications

Sovann Khan, Ken-ichi Katsumata, Vicente Rodríguez-González, Chiaki Terashima and Akira Fujishima
Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 1 (2020)
https://doi.org/10.1007/978-3-030-11155-7_10-1

Effect of gas pressure on conduit plasma atomization for fabricating spherical stainless steel powder

Dharmanto, Sugeng Supriadi, Ario Sunar Baskoro and Bambang Suharno
IOP Conference Series: Materials Science and Engineering 909 012008 (2020)
https://doi.org/10.1088/1757-899X/909/1/012008