Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum

Nor Aiman Sukindar, Ahmad Shah Hizam Md Yasir, Muhammad Danial Azhar, Muhammad Afif Md Azhar, Nor Farah Huda Abd Halim, Mohd Hafis Sulaiman, Ahmad Syamaizar Haji Ahmad Sabli and Mohd Khairol Anuar Mohd Ariffin
Heliyon 10 (4) e25508 (2024)
https://doi.org/10.1016/j.heliyon.2024.e25508

Advances in fused deposition modeling on process, process parameters, and multifaceted industrial application: a review

Michael Enyan, Jesse Nii Okai Amu-Darko, Eliasu Issaka and Olivier Joseph Abban
Engineering Research Express 6 (1) 012401 (2024)
https://doi.org/10.1088/2631-8695/ad32f6

4D Printing of Shape Memory Polymers, Blends, and Composites and Their Advanced Applications: A Comprehensive Literature Review

Mohamed Ali Kouka, Fethi Abbassi, Mohamed Habibi, France Chabert, Ali Zghal and Christian Garnier
Advanced Engineering Materials 25 (4) (2023)
https://doi.org/10.1002/adem.202200650

Soft Mechanosensing via 3D Printing: A review

Diana Cafiso, Simone Lantean, Candido Fabrizio Pirri and Lucia Beccai
Advanced Intelligent Systems 5 (6) (2023)
https://doi.org/10.1002/aisy.202200373

Influence of the Type of Plastic and Printing Technologies on the Compressive Behavior of 3D-Printed Heel Prototypes

Edita Gelaziene and Daiva Milasiene
Materials 16 (5) 1930 (2023)
https://doi.org/10.3390/ma16051930

Stress-adapted fiber orientation along the principal stress directions for continuous fiber-reinforced material extrusion

Tim Heitkamp, Sebastian Kuschmitz, Simon Girnth, et al.
Progress in Additive Manufacturing 8 (3) 541 (2023)
https://doi.org/10.1007/s40964-022-00347-x

Examination of Low-Cyclic Fatigue Tests and Poisson’s Ratio Depending on the Different Infill Density of Polylactide (PLA) Produced by the Fused Deposition Modeling Method

Anna Gaweł, Stanisław Kuciel, Aneta Liber-Kneć and Dariusz Mierzwiński
Polymers 15 (7) 1651 (2023)
https://doi.org/10.3390/polym15071651

Green technologies in smart city multifloor manufacturing clusters: A framework for additive manufacturing management

Agnieszka Deja, Wojciech Ślączka, Lyudmyla Dzhuguryan, Tygran Dzhuguryan and Robert Ulewicz
Production Engineering Archives 29 (4) 428 (2023)
https://doi.org/10.30657/pea.2023.29.48

Technological Advancement in Instrumentation & Human Engineering

J. Kananathan, K. Rajan, M. Samykano, et al.
Lecture Notes in Electrical Engineering, Technological Advancement in Instrumentation & Human Engineering 882 339 (2023)
https://doi.org/10.1007/978-981-19-1577-2_26

Tribological and mechanical properties of fabricated soft materials with a podium mesostructured

Khan Rajib Hossain, Yang Lyu, Xinle Yao, YuJie Yang, Pan Jiang and Xiaolong Wang
Tribology International 187 108673 (2023)
https://doi.org/10.1016/j.triboint.2023.108673

A review on optimized FDM 3D printed Wood/PLA bio composite material characteristics

Mohit Bhayana, Jaswinder Singh, Ankit Sharma and Manish Gupta
Materials Today: Proceedings (2023)
https://doi.org/10.1016/j.matpr.2023.03.029

Fused Deposition Modelling of Polymeric Auxetic Structures: A Review

Davide Mocerino, Maria Rosaria Ricciardi, Vincenza Antonucci and Ilaria Papa
Polymers 15 (4) 1008 (2023)
https://doi.org/10.3390/polym15041008

Generation Algorithm of a Novel Platform Attached Support Structure for FDM-Fused Deposition Modeling

Ning Lv, Yunxu Li, Yujing Qiao and Ivan Giorgio
Advances in Materials Science and Engineering 2022 1 (2022)
https://doi.org/10.1155/2022/1532924

3D printing of continuous fiber reinforced composites: A review of the processing, pre- and post-processing effects on mechanical properties

Faraz Safari, Abdolvahed Kami and Vahid Abedini
Polymers and Polymer Composites 30 096739112210987 (2022)
https://doi.org/10.1177/09673911221098734

Synthesis and characterization of enhanced conductivity acrylonitrile‐butadiene‐styrene based composites suitable for fused filament fabrication

José J. Relinque, Ismael Romero‐Ocaña, Francisco J. Navas‐Martos, Francisco J. Delgado, Manuel Domínguez and Sergio I. Molina
Polymer Composites 43 (9) 6611 (2022)
https://doi.org/10.1002/pc.26976

Fused deposition modeling: process, materials, parameters, properties, and applications

Kumaresan Rajan, Mahendran Samykano, Kumaran Kadirgama, Wan Sharuzi Wan Harun and Md. Mustafizur Rahman
The International Journal of Advanced Manufacturing Technology 120 (3-4) 1531 (2022)
https://doi.org/10.1007/s00170-022-08860-7

Recent Advances in Manufacturing Processes and Systems

Sanket S. Jagtap, Ganesh P. Borikar and Snehal B. Kolekar
Lecture Notes in Mechanical Engineering, Recent Advances in Manufacturing Processes and Systems 595 (2022)
https://doi.org/10.1007/978-981-16-7787-8_48

Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020)

Mohd Shoeb, Lokesh Kumar, Abid Haleem and Mohd Javaid
Lecture Notes on Multidisciplinary Industrial Engineering, Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020) 491 (2022)
https://doi.org/10.1007/978-3-030-73495-4_34

ATMOSFERİK BASINÇLI PLAZMA UYGULAMASININ 3B BASKILARA ETKİSİNİN İNCELENMESİ

Murat DAL and Kadir ÇAVDAR
Uludağ University Journal of The Faculty of Engineering 975 (2022)
https://doi.org/10.17482/uumfd.1087623

Additive manufacturing of functional devices for environmental applications: A review

Ana Paula Fagundes, Jéssica Oliveira de Brito Lira, Natan Padoin, Cíntia Soares and Humberto Gracher Riella
Journal of Environmental Chemical Engineering 10 (3) 108049 (2022)
https://doi.org/10.1016/j.jece.2022.108049

Optimization of the fused deposition modeling-based fabrication process for polylactic acid microneedles

Libo Wu, Jongho Park, Yuto Kamaki and Beomjoon Kim
Microsystems & Nanoengineering 7 (1) (2021)
https://doi.org/10.1038/s41378-021-00284-9

Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications

Borra N. Dhanunjayarao, N. V. Swamy Naidu, Rajana Suresh Kumar, et al.
Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 1393 (2021)
https://doi.org/10.1007/978-3-030-36268-3_166

Intrinsic Field-Induced Nanoparticle Assembly in Three-Dimensional (3D) Printing Polymeric Composites

Dharneedar Ravichandran, Weiheng Xu, Sayli Jambhulkar, et al.
ACS Applied Materials & Interfaces 13 (44) 52274 (2021)
https://doi.org/10.1021/acsami.1c12763

Fused Filament Fabrication of Polymers and Continuous Fiber-Reinforced Polymer Composites: Advances in Structure Optimization and Health Monitoring

Fatemeh Mashayekhi, Julien Bardon, Vincent Berthé, et al.
Polymers 13 (5) 789 (2021)
https://doi.org/10.3390/polym13050789

Influence of Infill Pattern on Mechanical Behavior of Polymeric and Composites Specimens Manufactured Using Fused Filament Fabrication Technology

María Jesús Martín, Juan Antonio Auñón and Francisco Martín
Polymers 13 (17) 2934 (2021)
https://doi.org/10.3390/polym13172934

Effect of process parameters on thermal and mechanical properties of polymer‐based composites using fused filament fabrication

Khaled Benfriha, Mohammad Ahmadifar, Mohammadali Shirinbayan and Abbas Tcharkhtchi
Polymer Composites 42 (11) 6025 (2021)
https://doi.org/10.1002/pc.26282

A novel use of twisted continuous carbon fibers in additive manufacturing of composites

A.U. Aravind, Atul Ramesh Bhagat and Ramanujam Radhakrishnan
Materials Today: Proceedings 46 7049 (2021)
https://doi.org/10.1016/j.matpr.2020.07.665

A Comparative Study of the Linear-elastic and Hyperelastic Models for Degradation of PLA Prepared using Fused Filament Fabrication

Na-Yeon Choi, Byoung-Chul Shin and Sung-Uk Zhang
Journal of the Korean Society of Manufacturing Process Engineers 19 (3) 1 (2020)
https://doi.org/10.14775/ksmpe.2020.19.03.001

Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems

S.C. Daminabo, S. Goel, S.A. Grammatikos, H.Y. Nezhad and V.K. Thakur
Materials Today Chemistry 16 100248 (2020)
https://doi.org/10.1016/j.mtchem.2020.100248

Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications

Borra N. Dhanunjayarao, N. V. Swamy Naidu, Rajana Suresh Kumar, et al.
Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications 1 (2020)
https://doi.org/10.1007/978-3-030-11155-7_166-1

Effect of infill pattern on mechanical properties of 3D printed PLA and cPLA

Cheow Keat Yeoh, Chee Son Cheah, Raguvaran Pushpanathan, et al.
IOP Conference Series: Materials Science and Engineering 957 (1) 012064 (2020)
https://doi.org/10.1088/1757-899X/957/1/012064

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments

Sachini Wickramasinghe, Truong Do and Phuong Tran
Polymers 12 (7) 1529 (2020)
https://doi.org/10.3390/polym12071529

Neutron Shielding Performance of 3D-Printed Boron Carbide PEEK Composites

Yin Wu, Yi Cao, Ying Wu and Dichen Li
Materials 13 (10) 2314 (2020)
https://doi.org/10.3390/ma13102314