Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Investigation on micro-cutting and chip formation mechanism of CoCrFeNiAlX series high-entropy alloy

Ping Zhang, Shunxiang Wang, Zhenyong Lin, Xiujie Yue, Hanping Zhou and Songting Zhang
Journal of the Brazilian Society of Mechanical Sciences and Engineering 46 (3) (2024)
https://doi.org/10.1007/s40430-024-04705-4

Research on micro-cutting mechanism of CoCrFeNiAlX high-entropy alloy fiber–reinforced aluminum matrix composites

Ping Zhang, Shunxiang Wang, Xiujie Yue, Zhenyong Lin, Yeran Gao and Songting Zhang
The International Journal of Advanced Manufacturing Technology 130 (3-4) 1779 (2024)
https://doi.org/10.1007/s00170-023-12816-w

Analysis of processing efficiency, surface, and bulk chemistry, and nanomechanical properties of the Monel® alloy 400 after ultrashort pulsed laser ablation

Kipkurui Ronoh, Jan Novotný, Libor Mrňa, Alexandr Knápek and Dinara Sobola
Materials Research Express 11 (1) 016514 (2024)
https://doi.org/10.1088/2053-1591/ad184b

The mechanism of the effect of dual-sided waterjet peening on the surface integrity and fatigue performance of 12 mm thick Inconel 718

Ping Zhang, Yeran Gao, Songting Zhang, Xiujie Yue, Shunxiang Wang and Zhenyong Lin
International Journal of Fatigue 178 108011 (2024)
https://doi.org/10.1016/j.ijfatigue.2023.108011

The mechanism on surface integrity and fatigue performance of double‐sided micro‐cutting enhanced FeCoCrNiAl0.6 high entropy alloy

Ping Zhang, Zhenyong Lin, Yeran Gao, Songting Zhang, Xiujie Yue and Shunxiang Wang
Fatigue & Fracture of Engineering Materials & Structures 47 (7) 2570 (2024)
https://doi.org/10.1111/ffe.14317

Study on the Micro-cutting Mechanism of 7075 Aluminum Alloy with Pre-fabricated Surface Microtextures

Ping Zhang, Songting Zhang, Yajie Sun, Jinlong Zhang and Xiujie Yue
Journal of Materials Engineering and Performance (2024)
https://doi.org/10.1007/s11665-024-09594-1

Mechanical and surface characteristics in laser-assisted machining of NiFeCr alloy: An atomic-scale understanding

Dinh-Quan Doan, Thi-Bao-Tien Tran, Duc-Luan Nguyen and Van-Ha Nguyen
Optics & Laser Technology 179 111297 (2024)
https://doi.org/10.1016/j.optlastec.2024.111297

Investigation on the micro-cutting mechanism of aluminum matrix composites with ultrasound elliptical vibration

Ping Zhang, Shunxiang Wang, Songting Zhang and Xiujie Yue
The International Journal of Advanced Manufacturing Technology (2024)
https://doi.org/10.1007/s00170-024-13924-x

Effects of laser and scanning parameters on surface modification of MONEL® alloy 400 by picosecond laser

Kipkurui Ronoh, Jan Novotný, Libor Mrňa, Alexandr Knápek and Dinara Sobola
Optics & Laser Technology 172 110514 (2024)
https://doi.org/10.1016/j.optlastec.2023.110514

Microstructure and oxidation of a Ni–Al based intermetallic coating formation on a Monel-400 alloy

Tuba Yener, Alperen Refik Bilal Özsarı, Kadir Mert Döleker, Azmi Erdoğan and Suayb Çağri Yener
Materials Testing (2024)
https://doi.org/10.1515/mt-2024-0038

LOW TEMPERATURE ALUMINIZATION EFFECT ON MONEL 400 ALLOY PRODUCED BY PACK CEMENTATION METHOD

Alperen Refik Bilal ÖZSARI, Feyza SELAMET and Tuba YENER
Mugla Journal of Science and Technology 9 (2) 89 (2023)
https://doi.org/10.22531/muglajsci.1310224

Effect of T6I4 and T616 on the machinability of 7075 aluminum alloy and tool wear mechanism

Ping Zhang, Yeran Gao, Shunxiang Wang, Zehua Liu, Zhenyong Lin, Songting Zhang and Xiujie Yue
The International Journal of Advanced Manufacturing Technology 127 (9-10) 4453 (2023)
https://doi.org/10.1007/s00170-023-11733-2

Analysis of performance characteristics with artificial intelligence based TLBO technique for laser drilling of Monel superalloy

D. Pramanik, T. Singh, N. Roy, et al.
Optics & Laser Technology 164 109554 (2023)
https://doi.org/10.1016/j.optlastec.2023.109554

Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil baths

Katerina Mouralova, Libor Benes, Tomas Prokes, et al.
The International Journal of Advanced Manufacturing Technology 125 (5-6) 2705 (2023)
https://doi.org/10.1007/s00170-023-10913-4

Investigation on the micromachining mechanism of FeCoCrNiAl0.6 high-entropy alloy

Ping Zhang, Zhenyong Lin, Shunxiang Wang, Xiujie Yue, Yeran Gao and Songting Zhang
The International Journal of Advanced Manufacturing Technology 127 (9-10) 4803 (2023)
https://doi.org/10.1007/s00170-023-11820-4

Investigation of residual stress formation mechanism with water jet strengthening of CoCrFeNiAlx high-entropy alloy

Ping Zhang, Yeran Gao, Songting Zhang, Xiujie Yue, Shunxiang Wang and Zhenyong Lin
Vacuum 217 112446 (2023)
https://doi.org/10.1016/j.vacuum.2023.112446

The Effect of Cutting Parameters on Surface Quality and Corrosion Resistance of Micro-machined Surfaces of 7075 Aluminum Alloy

Ping Zhang, Junling Liu, Zhenyong Lin, Shunxiang Wang, Jiang Yu and Qingqun Mai
Journal of Materials Engineering and Performance (2023)
https://doi.org/10.1007/s11665-023-08639-1

Investigation on the microstructure evolution and nanocutting mechanism of single-crystal copper under different crystal orientations

Zhang Ping, Zhang Songting, Lin Zhenyong, Wang Shunxiang, Yue Xiujie, Gao Yeran and Youqiang Wang
The International Journal of Advanced Manufacturing Technology 129 (1-2) 815 (2023)
https://doi.org/10.1007/s00170-023-12303-2

Feasibility analysis and process characteristics of selective laser ablation assisted milling Inconel 718

Bao-Yu Zhang, Yu-Ning Zeng, Xue-Qin Pang, et al.
Advances in Manufacturing 10 (4) 495 (2022)
https://doi.org/10.1007/s40436-021-00384-9

Investigation of surface integrity in laser-assisted turning of AISI 4340 hardened steel: Finite element simulation with experimental verification

Farzad Ahmadi Khatir, Mohammad Hossein Sadeghi and Samet Akar
Optics & Laser Technology 147 107623 (2022)
https://doi.org/10.1016/j.optlastec.2021.107623

A study on the process efficiency of laser-assisted machining investigating energy consumption

Won-Jung Oh and Choon-Man Lee
The International Journal of Advanced Manufacturing Technology 113 (3-4) 867 (2021)
https://doi.org/10.1007/s00170-021-06651-0

A review on applications of artificial intelligence in modeling and optimization of laser beam machining

Ali Naderi Bakhtiyari, Zhiwen Wang, Liyong Wang and Hongyu Zheng
Optics & Laser Technology 135 106721 (2021)
https://doi.org/10.1016/j.optlastec.2020.106721

Laser Alloying Monel 400 with Amorphous Boron to Obtain Hard Coatings

Mateusz Kuklinski, Aneta Bartkowska and Damian Przestacki
Materials 12 (21) 3494 (2019)
https://doi.org/10.3390/ma12213494