Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts
MATEC Web Conf., 157 (2018) 01022
Published online: 2018-03-14
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Finite Element Analysis of the Axially Non-symmetrical Piercing Punches Performance for Belt Perforation
Dominik Wojtkowiak, Krzysztof Talaśka, M. Macko, et al.MATEC Web of Conferences 357 02001 (2022)
https://doi.org/10.1051/matecconf/202235702001
Modeling of the Construction for the Combustion Chamber of the Gas Calorimeter in the Aspect of Exhaust Gas Homogenization in the Measuring Space
Jarosław Markowski, Damian Olejniczak, Marcin Nowacki, et al.MATEC Web of Conferences 357 02020 (2022)
https://doi.org/10.1051/matecconf/202235702020
Types and causes of damage to the conveyor belt – Review, classification and mutual relations
Piotr Bortnowski, Witold Kawalec, Robert Król and Maksymilian OzdobaEngineering Failure Analysis 140 106520 (2022)
https://doi.org/10.1016/j.engfailanal.2022.106520
A Coupled Eulerian-Lagrangian Simulation and Tool Optimization for Belt Punching Process with a Single Cutting Edge
Dominik Wojtkowiak, Krzysztof Talaśka, Dominik Wilczyński, Jan Górecki and Krzysztof WałęsaMaterials 14 (18) 5406 (2021)
https://doi.org/10.3390/ma14185406
Analysis of threaded connections under impact load
K Talaśka and D WojtkowiakIOP Conference Series: Materials Science and Engineering 776 (1) 012052 (2020)
https://doi.org/10.1088/1757-899X/776/1/012052
Application of alternative additives in the polymer composite systems used in automotive industry
D Ondrušová, I Labaj, J Vršková, M Pajtášová and V Zvoláneková MezencevováIOP Conference Series: Materials Science and Engineering 776 (1) 012101 (2020)
https://doi.org/10.1088/1757-899X/776/1/012101
Biomass cutting tests to determine the lowest value of the process force
D Wilczyński, K Wałęsa, M Berdychowski and M KuklaIOP Conference Series: Materials Science and Engineering 776 (1) 012014 (2020)
https://doi.org/10.1088/1757-899X/776/1/012014
Testing functional features of V-belt transmissions
P Krawiec, M Pajtášová, F Meler and Ł WargułaIOP Conference Series: Materials Science and Engineering 776 (1) 012008 (2020)
https://doi.org/10.1088/1757-899X/776/1/012008
The application of the Finite Element Method analysis in the process of designing the punching die for belt perforation
D Wojtkowiak, K Talaśka and A FierekIOP Conference Series: Materials Science and Engineering 776 (1) 012057 (2020)
https://doi.org/10.1088/1757-899X/776/1/012057
Preliminary research of strength of glued connections of plastic elements
A Fierek, I Malujda, D Wilczyński and K WałęsaIOP Conference Series: Materials Science and Engineering 776 (1) 012027 (2020)
https://doi.org/10.1088/1757-899X/776/1/012027
Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block
D Wojtkowiak, K Talaśka and M BerdychowskiIOP Conference Series: Materials Science and Engineering 776 (1) 012055 (2020)
https://doi.org/10.1088/1757-899X/776/1/012055
The problem of fixing the axisymmetric elements on the example of pulley mounting on the shaft
G Domek, A Kołodziej and I DziubekIOP Conference Series: Materials Science and Engineering 776 (1) 012070 (2020)
https://doi.org/10.1088/1757-899X/776/1/012070
Construction design and structural analyse of transfer system
L Jakubovičová, P Kopas, M Handrik, et al.IOP Conference Series: Materials Science and Engineering 776 (1) 012032 (2020)
https://doi.org/10.1088/1757-899X/776/1/012032
Experimental research of the thermoplastic belt plasticizing process in the hot plate welding
K Wałęsa, I Malujda and D WilczyńskiIOP Conference Series: Materials Science and Engineering 776 (1) 012011 (2020)
https://doi.org/10.1088/1757-899X/776/1/012011
Modelling of wear out of timing belt’s pulley
G Domek, A Kołodziej and M WilczyńskiIOP Conference Series: Materials Science and Engineering 776 (1) 012069 (2020)
https://doi.org/10.1088/1757-899X/776/1/012069
The design issues of rolling bearing assemblies
K Talaśka, D Wojtkowiak and A FierekIOP Conference Series: Materials Science and Engineering 776 (1) 012054 (2020)
https://doi.org/10.1088/1757-899X/776/1/012054
Evaluation of the belt punching process efficiency based on the resistance force of the compressed material
Dominik Wojtkowiak, Krzysztof Talaśka and Dominik WilczyńskiThe International Journal of Advanced Manufacturing Technology 110 (3-4) 717 (2020)
https://doi.org/10.1007/s00170-020-05819-4
Designing of the Machine for Cutting Transport Belts: Conceptual Works
Aashutosh Kale, Aleksandra Biszczanik, Krzysztof Wałęsa, Mateusz Kukla, Maciej Berdychowski and Dominik WilczyńskiActa Mechanica et Automatica 14 (3) 144 (2020)
https://doi.org/10.2478/ama-2020-0021
The Toxicological Testing and Thermal Decomposition of Drive and Transport Belts Made of Thermoplastic Multilayer Polymer Materials
Piotr Krawiec, Łukasz Warguła, Daniel Małozięć, Piotr Kaczmarzyk, Anna Dziechciarz and Dorota Czarnecka-KomorowskaPolymers 12 (10) 2232 (2020)
https://doi.org/10.3390/polym12102232
Modelling a timing belt pitch
Grzegorz Domek, Michał Wilczyński, I. Malujda, et al.MATEC Web of Conferences 254 01011 (2019)
https://doi.org/10.1051/matecconf/201925401011
The influence of the piercing punch profile on the stress distribution on its cutting edge
Dominik Wojtkowiak, Krzysztof Talaśka, I. Malujda, et al.MATEC Web of Conferences 254 02001 (2019)
https://doi.org/10.1051/matecconf/201925402001
Modelling the Belt Perforation Process with the Piercing Punch and the Die in the Context of the Construction of the Punching Dies
D Wojtkowiak and K TalaśkaIOP Conference Series: Materials Science and Engineering 647 (1) 012013 (2019)
https://doi.org/10.1088/1757-899X/647/1/012013
Wear evaluation study of the multiple grooved pulleys with optical method
Piotr Krawiec, Łukasz Warguła, Konrad Waluś, et al.MATEC Web of Conferences 254 01004 (2019)
https://doi.org/10.1051/matecconf/201925401004
The influence of geometrical parameters of the forming channel on the boundary value of the axial force in the agglomeration process of dry ice
Jan Górecki, Ireneusz Malujda, Dominik Wilczyński, et al.MATEC Web of Conferences 254 05001 (2019)
https://doi.org/10.1051/matecconf/201925405001
Preliminary research of the thermomechanical properties of the round drive belts
Krzysztof Wałęsa, Olga Mysiukiewicz, Michał Pietrzak, et al.MATEC Web of Conferences 254 06007 (2019)
https://doi.org/10.1051/matecconf/201925406007
Determination of the effective geometrical features of the piercing punch for polymer composite belts
Dominik Wojtkowiak and Krzysztof TalaśkaThe International Journal of Advanced Manufacturing Technology 104 (1-4) 315 (2019)
https://doi.org/10.1007/s00170-019-03746-7
Influence of tension layer quality on mechanical properties of timing belts
Michał Wilczyński, Grzegorz Domek, I. Malujda, et al.MATEC Web of Conferences 254 05010 (2019)
https://doi.org/10.1051/matecconf/201925405010
Experimental research on the process of cutting transport belts
Dominik Wilczyński, Ireneusz Malujda, Jan Górecki, et al.MATEC Web of Conferences 254 05014 (2019)
https://doi.org/10.1051/matecconf/201925405014
The temperature distribution during heating in hot plate welding process
Krzysztof Wałęsa, Ireneusz Malujda, Jan Górecki, et al.MATEC Web of Conferences 254 02033 (2019)
https://doi.org/10.1051/matecconf/201925402033
Estimation of the perforation force for polymer composite conveyor belts taking into consideration the shape of the piercing punch
Dominik Wojtkowiak, Krzysztof Talaśka, Ireneusz Malujda and Grzegorz DomekThe International Journal of Advanced Manufacturing Technology 98 (9-12) 2539 (2018)
https://doi.org/10.1007/s00170-018-2381-3