EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues MATEC Web Conf., 136 (2017) 02006 Article references

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Mechanical and surface characteristics in laser-assisted machining of NiFeCr alloy: An atomic-scale understanding

Dinh-Quan Doan, Thi-Bao-Tien Tran, Duc-Luan Nguyen and Van-Ha Nguyen
Optics & Laser Technology 179 111297 (2024)
https://doi.org/10.1016/j.optlastec.2024.111297

A study on microstructural, mechanical properties and optimization of wear behavior of friction stir processed AlCrCoFeNi High Entropy Alloy reinforced SS410 using response surface methodology

S. Ragunath, N. Radhika, S. Aravind Krishna and L. Rajeshkumar
Heliyon 10 (2) e24429 (2024)
https://doi.org/10.1016/j.heliyon.2024.e24429

Investigation on micro-cutting and chip formation mechanism of CoCrFeNiAlX series high-entropy alloy

Ping Zhang, Shunxiang Wang, Zhenyong Lin, Xiujie Yue, Hanping Zhou and Songting Zhang
Journal of the Brazilian Society of Mechanical Sciences and Engineering 46 (3) (2024)
https://doi.org/10.1007/s40430-024-04705-4

The mechanism of the effect of dual-sided waterjet peening on the surface integrity and fatigue performance of 12 mm thick Inconel 718

Ping Zhang, Yeran Gao, Songting Zhang, Xiujie Yue, Shunxiang Wang and Zhenyong Lin
International Journal of Fatigue 178 108011 (2024)
https://doi.org/10.1016/j.ijfatigue.2023.108011

Investigation of residual stress formation mechanism with water jet strengthening of CoCrFeNiAlx high-entropy alloy

Ping Zhang, Yeran Gao, Songting Zhang, Xiujie Yue, Shunxiang Wang and Zhenyong Lin
Vacuum 217 112446 (2023)
https://doi.org/10.1016/j.vacuum.2023.112446

Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil baths

Katerina Mouralova, Libor Benes, Tomas Prokes, et al.
The International Journal of Advanced Manufacturing Technology 125 (5-6) 2705 (2023)
https://doi.org/10.1007/s00170-023-10913-4

Spatial gradient prediction and characterization of yield strength in the heat-affected zone in laser-assisted machining of Inconel 718

Hang Zhang, Ben Deng, Jieyu Lin, Xiaowei Tang, Rong Yan and Fangyu Peng
Optics & Laser Technology 163 109409 (2023)
https://doi.org/10.1016/j.optlastec.2023.109409

Investigation on the micromachining mechanism of FeCoCrNiAl0.6 high-entropy alloy

Ping Zhang, Zhenyong Lin, Shunxiang Wang, Xiujie Yue, Yeran Gao and Songting Zhang
The International Journal of Advanced Manufacturing Technology 127 (9-10) 4803 (2023)
https://doi.org/10.1007/s00170-023-11820-4

Feasibility analysis and process characteristics of selective laser ablation assisted milling Inconel 718

Bao-Yu Zhang, Yu-Ning Zeng, Xue-Qin Pang, et al.
Advances in Manufacturing 10 (4) 495 (2022)
https://doi.org/10.1007/s40436-021-00384-9

Ultrasonic and electrical discharge–assisted milling of the Ti-6Al-4 V alloy

Moran Xu, Changping Li, Rendi Kurniawan, et al.
The International Journal of Advanced Manufacturing Technology 122 (3-4) 1897 (2022)
https://doi.org/10.1007/s00170-022-10010-y

Investigation of surface integrity in laser-assisted turning of AISI 4340 hardened steel: Finite element simulation with experimental verification

Farzad Ahmadi Khatir, Mohammad Hossein Sadeghi and Samet Akar
Optics & Laser Technology 147 107623 (2022)
https://doi.org/10.1016/j.optlastec.2021.107623

Surface Topography Description of Threads Made with Turning on Inconel 718 Shafts

Bartłomiej Krawczyk, Piotr Szablewski, Michał Mendak, Bartosz Gapiński, Krzysztof Smak, Stanisław Legutko, Michał Wieczorowski and Edward Miko
Materials 16 (1) 80 (2022)
https://doi.org/10.3390/ma16010080

Analytical model of cutting force in axial ultrasonic vibration-assisted milling in-situ TiB2/7050Al PRMMCs

Xiaofen LIU, Wenhu WANG, Ruisong JIANG, et al.
Chinese Journal of Aeronautics 34 (4) 160 (2021)
https://doi.org/10.1016/j.cja.2020.08.009

Understanding the behaviour of workpieces' bulk temperature during laser-assisted turning of Ti6Al4V alloy and heating of Al-SiC metal-matrix composite rods

Chao Wei, Wei Guo, Bo Gao, et al.
Optics & Laser Technology 139 106951 (2021)
https://doi.org/10.1016/j.optlastec.2021.106951

Effect of tool microstructure on machining of titanium alloy TC21 based on simulation and experiment

Xiaohua Qian and Xiongying Duan
The International Journal of Advanced Manufacturing Technology 111 (7-8) 2301 (2020)
https://doi.org/10.1007/s00170-020-06248-z

An Investigation of Tool Performance in Interrupted Turning of Inconel 718

Tadeusz Chwalczuk, Martyna Wiciak, Agata Felusiak, Piotr Kieruj and R. Das
MATEC Web of Conferences 237 02008 (2018)
https://doi.org/10.1051/matecconf/201823702008

Surface Roughness Characterization of Inconel 718 after Laser Assisted Turning

Agata Felusiak, Tadeusz Chwalczuk, Martyna Wiciak and R. Das
MATEC Web of Conferences 237 01004 (2018)
https://doi.org/10.1051/matecconf/201823701004

Experimental Investigation and Performance Analysis of Ceramic Inserts in Laser Assisted Turning of Waspaloy

Martyna Wiciak, Tadeusz Chwalczuk, Agata Felusiak and R. Das
MATEC Web of Conferences 237 01003 (2018)
https://doi.org/10.1051/matecconf/201823701003

The Effects of Laser Surface Modification on the Microstructure of 1.4550 Stainless Steel

Damian Przestacki, Aneta Bartkowska, Mateusz Kukliński, Piotr Kieruj and R. Das
MATEC Web of Conferences 237 02009 (2018)
https://doi.org/10.1051/matecconf/201823702009