Tensile tests of specimens made of selected group of the filament materials manufactured with FDM method
MATEC Web Conf., 112 (2017) 04017
Published online: 2017-07-03
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Ultra- and high-performance polymers for material extrusion additive manufacturing: Recent advancements, challenges, and optimization perspectives
Nectarios Vidakis, Markos Petousis, Maria Spyridaki, Nikolaos Mountakis, Evgenia Dimitriou and Nikolaos MichailidisMaterials Science and Engineering: R: Reports 167 101086 (2026)
https://doi.org/10.1016/j.mser.2025.101086
Static tensile and cyclic tension-tension fatigue testing investigation of 3D printed ABS materials: a comparative study of different infill orientation and infill density with statistical analysis
Md Zisanul Haque Bhuiyan and Khalil KhanaferProgress in Additive Manufacturing 11 (2) 1705 (2026)
https://doi.org/10.1007/s40964-025-01436-3
Effect of Materials on the Mechanical Properties of Fused Deposition Modeling Three-Dimensional Printed Products
Duy Phu Nguyen, Tu San Tran, Hai Yen Tran, Ngoc Phung Nguyen, Thong Minh Vo, Thi Hong Nga Pham, Vinh Tien Nguyen and Thanh Tan NguyenJournal of Technical Education Science 20 (01) 1 (2025)
https://doi.org/10.54644/jte.2025.1464
Structural and optical behavior of rapidly aged and unaged engineering-grade copolymers produced via fused deposition modeling
Caio de Carvalho Lucarelli, Matheus Menezes Oliveira, Gustavo Bozzi Pagoto, João Pedro Martins Pereira and Joyce Correna CarloMultiscale and Multidisciplinary Modeling, Experiments and Design 8 (6) (2025)
https://doi.org/10.1007/s41939-025-00861-9
1169 469 (2024)
https://doi.org/10.1007/978-3-031-73324-6_46
The effect of high-intensity gamma radiation on PETG and ASA polymer-based fused deposition modelled 3D printed parts
Sam Cressall, Chris O. Phillips, Wafaa Al-Shatty and Davide DeganelloJournal of Materials Science 59 (4) 1768 (2024)
https://doi.org/10.1007/s10853-023-09309-2
Enhancing Corrosion Resistance and Mechanical Strength of 3D‐Printed Iron Polylactic Acid for Marine Applications via Laser Surface Texturing
Mohammad Rezayat, Mojtaba Karamimoghadam, Mohammadreza Lalegani Dezaki, Ali Zolfagharian, Giuseppe Casalino, Antonio Mateo and Mahdi BodaghiAdvanced Engineering Materials (2024)
https://doi.org/10.1002/adem.202402591
The Influence of Selected Parameters of Recycled Polyvinyl Butyral on the Sustainable Filament Extrusion Process
Matúš Martiček, Rebeka Tauberová, Jakub Kaščak, Radoslav Vandžura, Enes Sukić and Lucia KnapčíkováApplied Sciences 14 (21) 9752 (2024)
https://doi.org/10.3390/app14219752
1 (2023)
https://doi.org/10.1109/HNICEM60674.2023.10589212
Effect of FDM printing patterns on mechanical properties of ABS
Rodrigo Enzo de Prada, Guillermo Rubén Bossio and Mariano Martín BrunoRapid Prototyping Journal 29 (10) 2098 (2023)
https://doi.org/10.1108/RPJ-04-2023-0130
Comparison of Mechanical Properties of Samples Fabricated by Stereolithography and Fused Deposition Modelling
Mehmet Said BAYRAKLILAR, Melih KUNCAN, Abdulkadir BULDU, Muhammed Tayyip KOÇAK and Osman ÜLKİRJournal of Materials and Mechatronics: A 4 (2) 475 (2023)
https://doi.org/10.55546/jmm.1358963
A Study on Mechanical Properties of Low-Cost Thermoplastic-Based Materials for Material Extrusion Additive Manufacturing
Mihaela-Raluca Condruz, Alexandru Paraschiv, Teodor-Adrian Badea, et al.Polymers 15 (14) 2981 (2023)
https://doi.org/10.3390/polym15142981
Impact of temperature and material variation on mechanical properties of parts fabricated with fused deposition modeling (FDM) additive manufacturing
M. Hossein Sehhat, Ali Mahdianikhotbesara and Farzad YadegariThe International Journal of Advanced Manufacturing Technology 120 (7-8) 4791 (2022)
https://doi.org/10.1007/s00170-022-09043-0
Analysis of PLA/PHB Biopolymer Material with Admixture of Hydroxyapatite and Tricalcium Phosphate for Clinical Use
Miroslav Kohan, Samuel Lancoš, Marek Schnitzer, Jozef Živčák and Radovan HudákPolymers 14 (24) 5357 (2022)
https://doi.org/10.3390/polym14245357
Evaluation and comparison of the degradability and compressive and tensile properties of 3D printing polymeric materials: PLA, PETG, PC, and ASA
Stamber Ramírez-Revilla, Daniela Camacho-Valencia, Elvis Gilmar Gonzales-Condori and Gerson MárquezMRS Communications 13 (1) 55 (2022)
https://doi.org/10.1557/s43579-022-00311-4
Mechanical properties of thermoplastic filament stitched carbon fiber reinforced composites
Gökçenur SAĞLAM and Ayşe BEDELOĞLUJournal of Innovative Science and Engineering (JISE) 248 (2022)
https://doi.org/10.38088/jise.979229
Effect of infill pattern and infill density at varying part orientation on tensile properties of fused deposition modeling-printed poly-lactic acid part
Harshit K Dave, Naushil H Patadiya, Ashish R Prajapati and Shilpesh R RajpurohitProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235 (10) 1811 (2021)
https://doi.org/10.1177/0954406219856383
3D Yazıcı İle Yazdırılmış Malzemede Ahşap Kaplama Laminasyonunun Eğilme Direncine Etkisi
Yasemin ÖZTÜRK and Erol BURDURLUBartın Orman Fakültesi Dergisi 23 (3) 885 (2021)
https://doi.org/10.24011/barofd.963190
Comparison of Mechanical Properties of PLA and ABS Based Structures Produced by Fused Deposition Modelling Additive Manufacturing
Koray ÖZSOY, Ali ERÇETİN and Zihni Alp ÇEVİKEuropean Journal of Science and Technology (2021)
https://doi.org/10.31590/ejosat.983317
Increasing strength of FFF three-dimensional printed parts by influencing on temperature-related parameters of the process
Vladimir E. Kuznetsov, Alexey N. Solonin, Azamat Tavitov, Oleg Urzhumtsev and Anna VakulikRapid Prototyping Journal 26 (1) 107 (2020)
https://doi.org/10.1108/RPJ-01-2019-0017