Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

Advances in Mechanical Engineering, Materials and Mechanics

M. Sbayti, R. Bahloul and H. Belhadjsalah
Lecture Notes in Mechanical Engineering, Advances in Mechanical Engineering, Materials and Mechanics 144 (2021)
DOI: 10.1007/978-3-030-52071-7_21
See this article

Incremental sheet forming towards biomedical implants: a review

Zinan Cheng, Yanle Li, Changxu Xu, et al.
Journal of Materials Research and Technology 9 (4) 7225 (2020)
DOI: 10.1016/j.jmrt.2020.04.096
See this article

Investigations on the influence of heat on AA1050 sheet during incremental forming

Swarit Singh, Satwik Priyadarshi and Puneet Tandon
Letters on Materials 9 (4s) 523 (2019)
DOI: 10.22226/2410-3535-2019-4-523-527
See this article

Formability Analyses on Single Point Incremental Sheet Forming Process on Aluminum 1050

Dawit Desalegn, P. Janaki Ramulu, Dagmawi Hailu, et al.
Materials Science Forum 969 703 (2019)
DOI: 10.4028/
See this article

Experimental investigation of new blank holder approach for incremental forming method

Ömer Seçgin and İbrahim Özsert
The International Journal of Advanced Manufacturing Technology 101 (1-4) 357 (2019)
DOI: 10.1007/s00170-018-2880-2
See this article

Effect of operational parameters on incremental forming of low-alloy sheet metals and its optimisation

Ömer Seçgin
Advances in Materials and Processing Technologies 7 (1) 71 (2021)
DOI: 10.1080/2374068X.2020.1753449
See this article

Efficiency of optimization algorithms on the adjustment of process parameters for geometric accuracy enhancement of denture plate in single point incremental sheet forming

Manel Sbayti, Riadh Bahloul and Hedi Belhadjsalah
Neural Computing and Applications 32 (13) 8829 (2020)
DOI: 10.1007/s00521-019-04354-y
See this article

Failure investigation on high velocity impact deformation of Boron Carbide (B4C) reinforced fiber metal laminates of Titanium / Glass fiber reinforced polymer

Dr.S. Suresh Kumar, Shankar P. A and Lalith Kumar K
Defence Technology (2021)
DOI: 10.1016/j.dt.2021.04.006
See this article

Single-Point Incremental Forming of Titanium and Titanium Alloy Sheets

Valentin Oleksik, Tomasz Trzepieciński, Marcin Szpunar, Łukasz Chodoła, Daniel Ficek and Ireneusz Szczęsny
Materials 14 (21) 6372 (2021)
DOI: 10.3390/ma14216372
See this article

Accuracy and Sheet Thinning Improvement of Deep Titanium Alloy Part with Warm Incremental Sheet-Forming Process

Badreddine Saidi, Laurence Giraud Moreau, Abel Cherouat and Rachid Nasri
Journal of Manufacturing and Materials Processing 5 (4) 122 (2021)
DOI: 10.3390/jmmp5040122
See this article

Split-Plot I-Optimal Design Optimisation of Combined Oil-Based and Friction Stir Rotation-Assisted Heating in SPIF of Ti-6Al-4V Titanium Alloy Sheet under Variable Oil Pressure

Tomasz Trzepieciński, Marcin Szpunar and Robert Ostrowski
Metals 12 (1) 113 (2022)
DOI: 10.3390/met12010113
See this article

Effective strategies of metamodeling and optimization of hot incremental sheet forming process of Ti6Al4Vartificial hip joint component

M. Sbayti, A. Ghiotti, R. Bahloul, H. BelhadjSalah and S. Bruschi
Journal of Computational Science 60 101595 (2022)
DOI: 10.1016/j.jocs.2022.101595
See this article