Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Computer-Aided Optimisation in Additive Manufacturing Processes: A State of the Art Survey

Tanja Emilie Henriksen, Tanita Fossli Brustad, Rune Dalmo and Aleksander Pedersen
Journal of Manufacturing and Materials Processing 8 (2) 76 (2024)
https://doi.org/10.3390/jmmp8020076

Laser beam shaping facilitates tailoring the mechanical properties of IN718 during powder bed fusion

José David Pérez-Ruiz, Francesco Galbusera, Leonardo Caprio, Barbara Previtali, Luis Norberto López de Lacalle, Aitzol Lamikiz and Ali Gökhan Demir
Journal of Materials Processing Technology 328 118393 (2024)
https://doi.org/10.1016/j.jmatprotec.2024.118393

Tailoring grain structure including grain size distribution, morphology, and orientation via building parameters on 316L parts produced by laser powder bed fusion

Nada Hassine, Sami Chatti and Lioua Kolsi
The International Journal of Advanced Manufacturing Technology 131 (9-10) 4483 (2024)
https://doi.org/10.1007/s00170-024-13181-y

A state-of-the-art review on fatigue performance of powder bed fusion-built alloy 718

Esmaeil Sadeghi, Paria Karimi, Reza Esmaeilizadeh, Filippo Berto, Shuai Shao, Johan Moverare, Ehsan Toyserkani and Nima Shamsaei
Progress in Materials Science 133 101066 (2023)
https://doi.org/10.1016/j.pmatsci.2022.101066

Process window for electron beam melting of Ti–42Nb wt.%

Irina Yu Grubova, Maria Kozadaeva, Anastasia P. Volkova, Dmitriy Khrapov, Roman A. Surmenev, Andrey V. Koptyug, Alina Vladescu (Dragomir), Alexander Tyurin and Maria A. Surmeneva
Journal of Materials Research and Technology 25 4457 (2023)
https://doi.org/10.1016/j.jmrt.2023.06.234

Systematic approach to process parameter optimization for laser powder bed fusion of low-alloy steel based on melting modes

Simon Bergmueller, Lukas Gerhold, Lorenz Fuchs, Lukas Kaserer and Gerhard Leichtfried
The International Journal of Advanced Manufacturing Technology 126 (9-10) 4385 (2023)
https://doi.org/10.1007/s00170-023-11377-2

Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship

Amir Mostafaei, Reza Ghiaasiaan, I-Ting Ho, Seth Strayer, Kai-Chun Chang, Nima Shamsaei, Shuai Shao, Santanu Paul, An-Chou Yeh, Sammy Tin and Albert C. To
Progress in Materials Science 136 101108 (2023)
https://doi.org/10.1016/j.pmatsci.2023.101108

A Comparison of Microstructure and Microhardness Properties of IN718 Fabricated via Powder- and Wire-Fed Laser-Directed Energy Deposition

Nandana Menon, Brady A. Sawyer, Cory D. Jamieson, Edward W. Reutzel and Amrita Basak
Materials 16 (3) 1129 (2023)
https://doi.org/10.3390/ma16031129

Room and elevated temperature tensile and fatigue behaviour of additively manufactured Hastelloy X

Amal Shaji Karapuzha, Darren Fraser, Daniel Schliephake, Stefan Dietrich, Yuman Zhu, Xinhua Wu and Aijun Huang
Materials Science and Engineering: A 882 145479 (2023)
https://doi.org/10.1016/j.msea.2023.145479

Fine-grained microstructure without texture obtained by electron beam powder bed fusion for AISI 304 L-based stainless steel

Christina Burkhardt, Marco Wendler, Robert Lehnert, Michael Hauser, Philipp Clausnitzer, Olena Volkova, Horst Biermann and Anja Weidner
Additive Manufacturing 69 103539 (2023)
https://doi.org/10.1016/j.addma.2023.103539

Enhancing equiaxed grain formation in a high-alloy tool steel using dual laser powder bed fusion

Simon Bergmueller, Josef Scheiber, Lukas Kaserer and Gerhard Leichtfried
Additive Manufacturing 74 103727 (2023)
https://doi.org/10.1016/j.addma.2023.103727

Using Selective Electron Beam Melting to Enhance the High‐Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites

Andreas Förner, Jan Vollhüter, Anna Krapf, Abdullah Jamjoom, Daniel Hausmann, Benjamin Wahlmann, Zongwen Fu, Carolin Körner, Steffen Neumeier and Mathias Göken
Advanced Engineering Materials 25 (15) (2023)
https://doi.org/10.1002/adem.202300407

Electron beam powder bed fusion for direct microstructure design – In-depth analysis of prospects and limitations of the multi spot scanning strategy

Tizian Arold, Andreas Suckau, Stefan Böhm, Philipp Krooß and Thomas Niendorf
Journal of Manufacturing Processes 108 485 (2023)
https://doi.org/10.1016/j.jmapro.2023.10.070

Process-aware optimisation of lattice structure by electron beam powder bed fusion

Manuela Galati, Massimo Giordano and Luca Iuliano
Progress in Additive Manufacturing 8 (3) 477 (2023)
https://doi.org/10.1007/s40964-022-00339-x

Prediction of cyclic damage in metallic alloys with crystal plasticity modeling enhanced by machine learning

Wenye Ye, Jake Hohl and Leslie T Mushongera
Materialia 22 101388 (2022)
https://doi.org/10.1016/j.mtla.2022.101388

Performance Analysis of Electro-chemical Machining of Ti-48Al-2Nb-2Cr Produced by Electron Beam Melting

Manuela Galati, Silvio Defanti and Lucia Denti
Smart and Sustainable Manufacturing Systems 6 (1) 53 (2022)
https://doi.org/10.1520/SSMS20210041

A survey on basic influencing factors of solidified grain morphology during electron beam melting

Yufan Zhao, Kenta Aoyagi, Kenta Yamanaka and Akihiko Chiba
Materials & Design 221 110927 (2022)
https://doi.org/10.1016/j.matdes.2022.110927

Comprehensive Study on Materials used in Different Types of Additive Manufacturing and their Applications

Rami Alfattni
International Journal of Mathematical, Engineering and Management Sciences 7 (1) 92 (2022)
https://doi.org/10.33889/IJMEMS.2022.7.1.007

Role of scan strategies and heat treatment on grain structure evolution in Fe-Si soft magnetic alloys made by laser-powder bed fusion

MP Haines, F. List, K. Carver, DN Leonard, A. Plotkowski, CM Fancher, RR Dehoff and SS Babu
Additive Manufacturing 50 102578 (2022)
https://doi.org/10.1016/j.addma.2021.102578

Recent Advances in Alloy Development for Metal Additive Manufacturing in Gas Turbine/Aerospace Applications: A Review

Dheepa Srinivasan and Kiruthika Ananth
Journal of the Indian Institute of Science 102 (1) 311 (2022)
https://doi.org/10.1007/s41745-022-00290-4

Alloy design and adaptation for additive manufacture

A.T. Clare, R.S. Mishra, M. Merklein, H. Tan, I. Todd, L. Chechik, J. Li and M. Bambach
Journal of Materials Processing Technology 299 117358 (2022)
https://doi.org/10.1016/j.jmatprotec.2021.117358

On the Impact of Build Envelope Sizes on E-PBF Processed Pure Iron

C. J. J. Torrent, P. Krooß and T. Niendorf
Metallurgical and Materials Transactions B 53 (1) 8 (2022)
https://doi.org/10.1007/s11663-021-02368-3

Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques

Michael P. Haines, Vitor V. Rielli, Sophie Primig and Nima Haghdadi
Journal of Materials Science 57 (30) 14135 (2022)
https://doi.org/10.1007/s10853-022-07501-4

A preliminary account of electro-chemical machining of Ti-48Al-2Nb-2Cr produced by electron beam melting

Manuela Galati, Silvio Defanti, Nicolò Vincenzi, Giovanni Marchiandi, Andrea Gatto and Luca Iuliano
Procedia CIRP 112 322 (2022)
https://doi.org/10.1016/j.procir.2022.09.103

Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties

Nana Kwabena Adomako, Nima Haghdadi and Sophie Primig
Materials & Design 223 111245 (2022)
https://doi.org/10.1016/j.matdes.2022.111245

Solidification dynamics in metal additive manufacturing: analysis of model assumptions *

B Stump, A Plotkowski and J Coleman
Modelling and Simulation in Materials Science and Engineering 29 (3) 035001 (2021)
https://doi.org/10.1088/1361-651X/abca19

A Single Crystal Process Window for Electron Beam Powder Bed Fusion Additive Manufacturing of a CMSX-4 Type Ni-Based Superalloy

Julian Pistor, Christoph Breuning and Carolin Körner
Materials 14 (14) 3785 (2021)
https://doi.org/10.3390/ma14143785

Influence of geometry on columnar to equiaxed transition during electron beam powder bed fusion of IN718

Narendran Raghavan, Benjamin C. Stump, Patxi Fernandez-Zelaia, Michael M. Kirka and Srdjan Simunovic
Additive Manufacturing 47 102209 (2021)
https://doi.org/10.1016/j.addma.2021.102209

Microstructure, mechanical behaviour and strengthening mechanisms in Hastelloy X manufactured by electron beam and laser beam powder bed fusion

Amal Shaji Karapuzha, Darren Fraser, Daniel Schliephake, Stefan Dietrich, Yuman Zhu, Xinhua Wu and Aijun Huang
Journal of Alloys and Compounds 862 158034 (2021)
https://doi.org/10.1016/j.jallcom.2020.158034

A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials

Andreas Kergaßner, Johannes A. Koepf, Matthias Markl, Carolin Körner, Julia Mergheim and Paul Steinmann
Journal of Materials Engineering and Performance 30 (7) 5235 (2021)
https://doi.org/10.1007/s11665-021-05725-0

Characterization of Inconel 718® superalloy fabricated by wire Arc Additive Manufacturing: effect on mechanical properties and machinability

Unai Alonso, Fernando Veiga, Alfredo Suárez and Alain Gil Del Val
Journal of Materials Research and Technology 14 2665 (2021)
https://doi.org/10.1016/j.jmrt.2021.07.132

Applications of artificial intelligence and machine learning in metal additive manufacturing

Leila Jannesari Ladani
Journal of Physics: Materials 4 (4) 042009 (2021)
https://doi.org/10.1088/2515-7639/ac2791

On the Microstructural and Cyclic Mechanical Properties of Pure Iron Processed by Electron Beam Melting

Christof Johannes Jaime Torrent, Steffen Wackenrohr, Julia Richter, César Ernesto Sobrero, Sebastian Degener, Philipp Krooß, Hans Jürgen Maier and Thomas Niendorf
Advanced Engineering Materials 23 (6) (2021)
https://doi.org/10.1002/adem.202100018

Columnar-to-equiaxed grain transition in powder bed fusion via mimicking casting solidification and promoting in situ recrystallization

Paria Karimi, Esmaeil Sadeghi, Joakim Ålgårdh, Ali Keshavarzkermani, Reza Esmaeilizadeh, Ehsan Toyserkani and Joel Andersson
Additive Manufacturing 46 102086 (2021)
https://doi.org/10.1016/j.addma.2021.102086

New Grain Formation Mechanisms during Powder Bed Fusion

Alexander M. Rausch, Julian Pistor, Christoph Breuning, Matthias Markl and Carolin Körner
Materials 14 (12) 3324 (2021)
https://doi.org/10.3390/ma14123324

Numerical simulation for electron beam selective melting PBF additive manufacturing of molybdenum

Muhammad Qasim Zafar, Chaochao Wu, Haiyan Zhao, Du Kai and Qianming Gong
The International Journal of Advanced Manufacturing Technology 117 (5-6) 1575 (2021)
https://doi.org/10.1007/s00170-021-07671-6

Inclusion-induced fatigue crack initiation in powder bed fusion of Alloy 718

Esmaeil Sadeghi, Paria Karimi, Niklas Israelsson, James Shipley, Tomas Månsson and Thomas Hansson
Additive Manufacturing 36 101670 (2020)
https://doi.org/10.1016/j.addma.2020.101670

Correlations of cracking with scan strategy and build geometry in electron beam powder bed additive manufacturing

Y.S. Lee, M.M. Kirka, J. Ferguson and V.C. Paquit
Additive Manufacturing 32 101031 (2020)
https://doi.org/10.1016/j.addma.2019.101031

Proceedings of the Future Technologies Conference (FTC) 2019

Samuel O. Alamu, Marc J Louise Caballes, Yulai Yang, Orlyse Mballa and Guangming Chen
Advances in Intelligent Systems and Computing, Proceedings of the Future Technologies Conference (FTC) 2019 1070 968 (2020)
https://doi.org/10.1007/978-3-030-32523-7_73

Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components

Camille Guévenoux, Simon Hallais, Alexandre Charles, Eric Charkaluk and Andrei Constantinescu
Optics & Laser Technology 128 106218 (2020)
https://doi.org/10.1016/j.optlastec.2020.106218

Finite element framework for electron beam melting process simulation

Muhammad Qasim Zafar, Chao Chao Wu, Haiyan Zhao, Jinnan Wang and Xingjian Hu
The International Journal of Advanced Manufacturing Technology 109 (7-8) 2095 (2020)
https://doi.org/10.1007/s00170-020-05707-x

Microstructural control during laser powder fusion to create graded microstructure Ni-superalloy components

B. Attard, S. Cruchley, Ch. Beetz, M. Megahed, Y.L. Chiu and M.M. Attallah
Additive Manufacturing 36 101432 (2020)
https://doi.org/10.1016/j.addma.2020.101432

Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review

Carolin Körner, Matthias Markl and Johannes A. Koepf
Metallurgical and Materials Transactions A 51 (10) 4970 (2020)
https://doi.org/10.1007/s11661-020-05946-3

Micromechanical Response of Additively Manufactured 316L Stainless Steel Processed by High‐Pressure Torsion

Shahir Mohd Yusuf, Ying Chen, Shoufeng Yang and Nong Gao
Advanced Engineering Materials 22 (10) (2020)
https://doi.org/10.1002/adem.202000052

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

Rongpei Shi, Saad A. Khairallah, Tien T. Roehling, Tae Wook Heo, Joseph T. McKeown and Manyalibo J. Matthews
Acta Materialia 184 284 (2020)
https://doi.org/10.1016/j.actamat.2019.11.053

On enhancing surface wear resistance via rotating grains during selective laser melting

Y. Yang, X. Li, M.M. Khonsari, Y. Zhu and H. Yang
Additive Manufacturing 36 101583 (2020)
https://doi.org/10.1016/j.addma.2020.101583

Solidification simulation of direct energy deposition process by multi-phase field method coupled with thermal analysis

Yusuke Shimono, Mototeru Oba and Sukeharu Nomoto
Modelling and Simulation in Materials Science and Engineering 27 (7) 074006 (2019)
https://doi.org/10.1088/1361-651X/ab3433

Microstructural control of alloy 718 fabricated by electron beam melting with expanded processing window by adaptive offset method

Xiao Ding, Yuichiro Koizumi, Kenta Aoyagi, et al.
Materials Science and Engineering: A 764 138058 (2019)
https://doi.org/10.1016/j.msea.2019.138058

Effect of process parameters on melt pool geometry and microstructure development for electron beam melting of IN718: A systematic single bead analysis study

Xiao Ding, Yuichiro Koizumi, Daixiu Wei and Akihiko Chiba
Additive Manufacturing 26 215 (2019)
https://doi.org/10.1016/j.addma.2018.12.018

Comprehensive Study on Mechanisms for Grain Morphology Evolution and Texture Development in Powder Bed Fusion with Electron Beam of Co-Cr-Mo Alloy

Yufan Zhao, Yuichiro Koizumi, Kenta Aoyagi, et al.
Materialia 100346 (2019)
https://doi.org/10.1016/j.mtla.2019.100346

Mechanical response of a Laser Cladding repaired structure: localization of plastic strain due to microstructure gradient

Camille Guévenoux, Simon Hallais, Alexandre Charles, et al.
MATEC Web of Conferences 300 03003 (2019)
https://doi.org/10.1051/matecconf/201930003003

Modeling of additively manufactured materials using gradient-enhanced crystal plasticity

Andreas Kergaßner, Julia Mergheim and Paul Steinmann
Computers & Mathematics with Applications 78 (7) 2338 (2019)
https://doi.org/10.1016/j.camwa.2018.05.016

Gradient Enhanced Crystal Plasticity in Additive Manufacturing Identification of a Macroscopic Yield Criterion

Andreas Kergaßner, Julia Mergheim and Paul Steinmann
PAMM 19 (1) (2019)
https://doi.org/10.1002/pamm.201900308

Fatigue properties of removable partial denture clasps fabricated by selective laser melting followed by heat treatment

Nuttaphon Kittikundecha, Yuka Kajima, Atsushi Takaichi, Hla Htoot Wai Cho, Hein Linn Htat, Hisashi Doi, Hidekazu Takahashi, Takao Hanawa and Noriyuki Wakabayashi
Journal of the Mechanical Behavior of Biomedical Materials 98 79 (2019)
https://doi.org/10.1016/j.jmbbm.2019.06.010

Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625

C.J. Hassila, P. Harlin and U. Wiklund
Wear 426-427 1837 (2019)
https://doi.org/10.1016/j.wear.2019.01.085

Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5

Curtis Lee Frederick, Alexander Plotkowski, Michael M. Kirka, Michael Haines, Austin Staub, Edwin J. Schwalbach, David Cullen and S. S. Babu
Metallurgical and Materials Transactions A 49 (10) 5080 (2018)
https://doi.org/10.1007/s11661-018-4793-y

Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications

Michael M. Kirka, Alex Plotkowski, Peeyush Nandwana, et al.
The Minerals, Metals & Materials Series, Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications 69 (2018)
https://doi.org/10.1007/978-3-319-89480-5_4

Single crystal plasticity – A mesoscale based approach for modeling the mechanics of additively manufactured Inconel 718

Andreas Kergaßner, Julia Mergheim and Paul Steinmann
PAMM 18 (1) (2018)
https://doi.org/10.1002/pamm.201800389

Metal Alloys for Fusion‐Based Additive Manufacturing

Duyao Zhang, Shoujin Sun, Dong Qiu, Mark A. Gibson, Matthew S. Dargusch, Milan Brandt, Ma Qian and Mark Easton
Advanced Engineering Materials 20 (5) (2018)
https://doi.org/10.1002/adem.201700952

A review of computational modeling in powder-based additive manufacturing for metallic part qualification

Jingfu Liu, Behrooz Jalalahmadi, Y.B. Guo, Michael P. Sealy and Nathan Bolander
Rapid Prototyping Journal 24 (8) 1245 (2018)
https://doi.org/10.1108/RPJ-04-2017-0058

Additive Manufacturing of Alloy 718 via Electron Beam Melting: Effect of Post-Treatment on the Microstructure and the Mechanical Properties

Arun Balachandramurthi, Johan Moverare, Satyapal Mahade and Robert Pederson
Materials 12 (1) 68 (2018)
https://doi.org/10.3390/ma12010068

Effect of microstructure on tensile properties of electrospark deposition repaired Ni-superalloy

Pablo D. Enrique, Zhen Jiao, Norman Y. Zhou and Ehsan Toyserkani
Materials Science and Engineering: A 729 268 (2018)
https://doi.org/10.1016/j.msea.2018.05.049

Grain boundary network evolution in Inconel 718 from selective laser melting to heat treatment

Sharniece Holland, Xiaoqing Wang, X.Y. Fang, et al.
Materials Science and Engineering: A 725 406 (2018)
https://doi.org/10.1016/j.msea.2018.04.045

Mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy fabricated with selective electron beam melting

Kosuke Kuwabara, Hiroshi Shiratori, Tadashi Fujieda, et al.
Additive Manufacturing 23 264 (2018)
https://doi.org/10.1016/j.addma.2018.06.006

Modelling of anisotropic elastic properties in alloy 718 built by electron beam melting

Chamara Kumara, Dunyong Deng, Johan Moverare and Per Nylén
Materials Science and Technology 34 (5) 529 (2018)
https://doi.org/10.1080/02670836.2018.1426258

Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing

Tien T. Roehling, Sheldon S.Q. Wu, Saad A. Khairallah, John D. Roehling, S. Stefan Soezeri, Michael F. Crumb and Manyalibo J. Matthews
Acta Materialia 128 197 (2017)
https://doi.org/10.1016/j.actamat.2017.02.025

Localized Melt-Scan Strategy for Site Specific Control of Grain Size and Primary Dendrite Arm Spacing in Electron Beam Additive Manufacturing

Narendran Raghavan, Srdjan Simunovic, Ryan Dehoff, et al.
Acta Materialia (2017)
https://doi.org/10.1016/j.actamat.2017.08.038

Quantitative texture prediction of epitaxial columnar grains in additive manufacturing using selective laser melting

Jian Liu and Albert C. To
Additive Manufacturing 16 58 (2017)
https://doi.org/10.1016/j.addma.2017.05.005

Trends in Solidification Grain Size and Morphology for Additive Manufacturing of Ti-6Al-4V

Joy Gockel, Luke Sheridan, Sneha P. Narra, Nathan W. Klingbeil and Jack Beuth
JOM 69 (12) 2706 (2017)
https://doi.org/10.1007/s11837-017-2601-6

Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing

J. Raplee, A. Plotkowski, M. M. Kirka, R. Dinwiddie, A. Okello, R. R. Dehoff and S. S. Babu
Scientific Reports 7 (1) (2017)
https://doi.org/10.1038/srep43554

Sheldon S. Q. Wu, Tien T. Roehling, Saad A. Khairallah, Alexander M. Rubenchik, John D. Roehling, S. Stefan Soezeri, Michael F. Crumb, Gabe Guss and Manyalibo J. Matthews
ATu1C.3 (2017)
https://doi.org/10.1364/CLEO_AT.2017.ATu1C.3

Effect of Energy Input on Microstructure and Mechanical Properties of Titanium Aluminide Alloy Fabricated by the Additive Manufacturing Process of Electron Beam Melting

Ashfaq Mohammad, Abdulrahman Alahmari, Muneer Mohammed, Ravi Renganayagalu and Khaja Moiduddin
Materials 10 (2) 211 (2017)
https://doi.org/10.3390/ma10020211

Reduced‐order modelling for linear heat conduction with parametrised moving heat sources

Benjamin Brands, Julia Mergheim and Paul Steinmann
GAMM-Mitteilungen 39 (2) 170 (2016)
https://doi.org/10.1002/gamm.201610011

Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing

Narendran Raghavan, Ryan Dehoff, Sreekanth Pannala, Srdjan Simunovic, Michael Kirka, John Turner, Neil Carlson and Sudarsanam S. Babu
Acta Materialia 112 303 (2016)
https://doi.org/10.1016/j.actamat.2016.03.063

Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting

Ercan Cakmak, Michael M. Kirka, Thomas R. Watkins, Ryan C. Cooper, Ke An, Hahn Choo, Wei Wu, Ryan R. Dehoff and Sudarsanam S. Babu
Acta Materialia 108 161 (2016)
https://doi.org/10.1016/j.actamat.2016.02.005

Modelling additive manufactured materials using a crystal plasticity model

Andreas Kergaßner, Julia Mergheim and Paul Steinmann
PAMM 16 (1) 355 (2016)
https://doi.org/10.1002/pamm.201610166

The metallurgy and processing science of metal additive manufacturing

W. J. Sames, F. A. List, S. Pannala, R. R. Dehoff and S. S. Babu
International Materials Reviews 61 (5) 315 (2016)
https://doi.org/10.1080/09506608.2015.1116649

Site specific control of crystallographic grain orientation through electron beam additive manufacturing

R. R. Dehoff, M. M. Kirka, W. J. Sames, H. Bilheux, A. S. Tremsin, L. E. Lowe and S. S. Babu
Materials Science and Technology 31 (8) 931 (2015)
https://doi.org/10.1179/1743284714Y.0000000734