Influence of porosity on the fatigue behaviour of additively fabricated TA6V alloys
MATEC Web Conf., 165 (2018) 02008
Published online: 2018-05-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Fatigue behavior of new custom porous dental implants manufactured by PBF-L/M: Finite element simulation and experimental validation
Amanda Robau-Porrua, Jesús E. González, Alberto Picardo, Carlos Navarro, Ernesto J. Delgado-Pujol, Antonio Periñán, Harold D. Pérez and Yadir TorresMechanics of Advanced Materials and Structures (2026)
https://doi.org/10.1080/15376494.2025.2606092
Shakedown limit of 316L stainless steel manufactured by laser powder bed fusion based on crystal plasticity enhanced direct cyclic analysis
Xuemei Lyu, Felix Weber, Geng Chen, Jiali Zhang, Tobias Sedlatschek and Christoph BroeckmannInternational Journal of Fatigue 203 109325 (2026)
https://doi.org/10.1016/j.ijfatigue.2025.109325
Effects of Process Parameters and Process Defects on the Flexural Fatigue Life of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion
Brandon Ramirez, Cristian Banuelos, Alex De La Cruz, Shadman Tahsin Nabil, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker and Francisco MedinaMaterials 17 (18) 4548 (2024)
https://doi.org/10.3390/ma17184548
Fatigue behaviour of additive manufactured Nb-48Ti alloy parts from powders produced by Plasma Atomization (PA) and Hydride-Dehydride (HDH) process
Willy Ank de Morais, Railson Bolsoni Falcão, Mário Boccalini Jr and Fernando José Gomes LandgrafEngineering Failure Analysis 156 107762 (2024)
https://doi.org/10.1016/j.engfailanal.2023.107762
Effect of chemical etching time on the fatigue behavior of Ti‐6Al‐4V produced by laser powder bed fusion
David Melle, Etienne Pessard, Franck Morel, Daniel Bellett, Frédéric Adamski and Rene BillardonFatigue & Fracture of Engineering Materials & Structures 47 (12) 4498 (2024)
https://doi.org/10.1111/ffe.14392
Improving the Fatigue Strength of Laser Powder Bed‐Fused AISI M3:2 by Hot Isostatic Pressing
Siyuan Qin, Simone Herzog, Anke Kaletsch and Christoph Broeckmannsteel research international 94 (4) (2023)
https://doi.org/10.1002/srin.202200435
Additive manufacturing and post-processing of superelastic NiTi micro struts as building blocks for cardiovascular stents
Valentina Finazzi, Francesca Berti, Lorenza Petrini, Barbara Previtali and Ali Gökhan DemirAdditive Manufacturing 70 103561 (2023)
https://doi.org/10.1016/j.addma.2023.103561
On the use of X-ray microtomography to control artificial defect geometries produced by metal additive manufacturing
Julien Lesseur, Benoit Tranchand, Thibaut Mancier, et al.Nondestructive Testing and Evaluation 37 (5) 611 (2022)
https://doi.org/10.1080/10589759.2022.2085701
Fatigue strength and life assessment of L-PBF 316L stainless steel showing process and corrosion related defects
Pierre Merot, Franck Morel, Etienne Pessard, Linamaria Gallegos Mayorga, Paul Buttin and Thierry BaffieEngineering Fracture Mechanics 276 108883 (2022)
https://doi.org/10.1016/j.engfracmech.2022.108883
Slanted and cluttered: Solving deficiencies in SLM-manufactured lattice geometries
Aleksandar Kostadinov, Lina Yan, Alex Quok An Teo and Gavin O'NeillMaterials & Design 211 110130 (2021)
https://doi.org/10.1016/j.matdes.2021.110130
Entrapped Gas and Process Parameter-Induced Porosity Formation in Additively Manufactured 17-4 PH Stainless Steel
Debomita Basu, Ziheng Wu, John L. L. Meyer, Elizabeth Larson, Robin Kuo and Anthony RollettJournal of Materials Engineering and Performance 30 (7) 5195 (2021)
https://doi.org/10.1007/s11665-021-05695-3
Effects of Pressure on Microstructure and Residual Stresses during Hot Isostatic Pressing Post Treatment of AISI M50 Produced by Laser Powder-Bed Fusion
Siyuan Qin, Simone Herzog, Anke Kaletsch and Christoph BroeckmannMetals 11 (4) 596 (2021)
https://doi.org/10.3390/met11040596
Fatigue Assessment of Selective Laser Melted Ti-6Al-4V: Influence of Speed Manufacturing and Porosity
Unai Segurajauregi, Adrián Álvarez-Vázquez, Miguel Muñiz-Calvente, Íker Urresti and Haydee NaveirasMetals 11 (7) 1022 (2021)
https://doi.org/10.3390/met11071022
A modified El-Haddad model for versatile defect tolerant design
Luke SheridanInternational Journal of Fatigue 145 106062 (2021)
https://doi.org/10.1016/j.ijfatigue.2020.106062
Defects in Electron Beam Melted Ti-6Al-4V: Fatigue Life Prediction Using Experimental Data and Extreme Value Statistics
Viktor Sandell, Thomas Hansson, Sushovan Roychowdhury, et al.Materials 14 (3) 640 (2021)
https://doi.org/10.3390/ma14030640
Physics-Based Predictive Model of Lack-of-Fusion Porosity in Laser Powder Bed Fusion Considering Cap Area
Wenjia Wang and Steven Y. LiangCrystals 11 (12) 1568 (2021)
https://doi.org/10.3390/cryst11121568
A probabilistic approach for high cycle fatigue of Wire and Arc Additive Manufactured parts taking into account process-induced pores
Lorenzo Bercelli, Sylvain Moyne, Matthieu Dhondt, Cédric Doudard, Sylvain Calloch and Julien BeaudetAdditive Manufacturing 42 101989 (2021)
https://doi.org/10.1016/j.addma.2021.101989
Stress-defect-life interactions of fatigued additively manufactured alloy 718
Luke Sheridan, Joy E. Gockel and Onome E. Scott-EmuakporInternational Journal of Fatigue 143 106033 (2021)
https://doi.org/10.1016/j.ijfatigue.2020.106033
Prediction of lack-of-fusion porosity in laser powder-bed fusion considering boundary conditions and sensitivity to laser power absorption
Wenjia Wang, Jinqiang Ning and Steven Y. LiangThe International Journal of Advanced Manufacturing Technology 112 (1-2) 61 (2021)
https://doi.org/10.1007/s00170-020-06224-7
A new FE post-processor for probabilistic fatigue assessment in the presence of defects and its application to AM parts
S. Romano, S. Miccoli and S. BerettaInternational Journal of Fatigue 125 324 (2019)
https://doi.org/10.1016/j.ijfatigue.2019.04.008
Primary Processing Parameters, Porosity Production, and Fatigue Prediction for Additively Manufactured Alloy 718
Luke Sheridan, Joy E. Gockel and Onome E. Scott-EmuakporJournal of Materials Engineering and Performance 28 (9) 5387 (2019)
https://doi.org/10.1007/s11665-019-04305-7
Interpretation of the fatigue anisotropy of additively manufactured TA6V alloys via a fracture mechanics approach
Viet-Duc Le, Etienne Pessard, Franck Morel and François EdyEngineering Fracture Mechanics 214 410 (2019)
https://doi.org/10.1016/j.engfracmech.2019.03.048
LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM
S. Romano, L. Patriarca, S. Foletti and S. BerettaInternational Journal of Fatigue 117 47 (2018)
https://doi.org/10.1016/j.ijfatigue.2018.07.030