Open Access
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
Article Number 06006
Number of page(s) 6
Section Chapter 6 Materials Science
Published online 29 July 2016
  1. D. J. Lloyd, Particle reinforced aluminium and magnesium matrix composites, Int. Mater. Rev. 39 (1994) 1–23. [CrossRef]
  2. P. Divecha, S. G. Fishman, S. D. G Karmarkar, Silicon carbide reinforced aluminum-a formable composite, J. Met. 33 (1981) 12–17.
  3. A. Ibrahim, F. A. Mohamed, E. J. Lavernia, Particulate reinforced metal matrix composites-a review, J. Mater. Sci. 25 (1991) 1137–1156. [CrossRef]
  4. T. F. Klimowicz, The large scale commercialization of aluminium-matrix composites, J. Met. 46 (1994) 49–53.
  5. E. J. Lavernia, R. J. Perez, J. Zhang, Damping behavior of discontinuously reinforced ai alloy metal-matrix composites, Metall. Mater. Trans. A 26 (1995) 2803–2818. [CrossRef]
  6. C. Zener, Effect of Strain rate upon plastic flow of steel, J. Appl. Phys. 15 (1944) 22–32. [CrossRef]
  7. V. V. Polyakov, A. N. Alekseev, Porosity dependence of the internal friction and elastic characteristics of iron powder’, Powder Metall. Met. C. 33 (1995) 192–193. [CrossRef]
  8. N. P. Cheng, S. M. Zeng, Z. Y. Liu, Preparation, microstructures and deformation behavior of SiCp/6066Al composites produced by PM route, J. Mater. Proc. Tech. 202 (2008) 27–40. [CrossRef]
  9. G. Cannelli, F. M. Mazzolai, An investigation on the Ta-H system by internal friction measurements, Nuovo Cimento B. 64 (1969) 171–180. [CrossRef]
  10. H. Gu, Effect of different heat treatment process on damping peak of 6061Al/SiCp MMC produced by spray co deposition, Trans. Nonferrous Met. Soc. China. 12 (2002) 960–966.
  11. Granato, K. Lucke, Theory of mechanical damping due to dislocations, J. Appl. Phys. 27 (1996) 583–593. [CrossRef]
  12. Y. Torisaka, S. Kojima, Super plasticity and internal friction of a superplastic Zn-22%Al eutectoid alloy, Acta Metall. et Mater. 39 (1991) 947–954. [CrossRef]
  13. Y. S. Kê, Stress Relaxation across Grain Boundaries in Metals, Phys. Rev. 72 (1947) 41–46. [CrossRef]