Open Access
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
Article Number 05026
Number of page(s) 7
Section Chapter 5 Metallurgical Engineering
Published online 29 July 2016
  1. S. Thompson, S.L. Cockcroft, M.A. Wells, Effect of cooling rate on solidification characteristics of aluminum alloy AA 5182, Mater. Sci. Tech.. 20 (2004) 497–504. [CrossRef]
  2. A.J. Whitehead, P.S. Cooper, R.W. McCarthy, Evaluation of metal cleanliness and grain refinement of 5182 aluminum alloy DC cast ingot using Al-3%Ti-0.15%C and Al-3%Ti-1%B grain refiners, Light Metals: Proc. Sess, TMS Annual Meeting, Pennsylvania, Feb 28-Mar 4 (1999) 763–772.
  3. P. Ratchev, B. Verlinden, P. Van Houtte, P. De Smet, On the influence of 0.5wt.% of Cu on the hot ductility of an AA 5182 Al-Mg alloy. Mater. Sci. Forum. 217–222 (1996) 1187–1192. [CrossRef]
  4. S.C. Flood, P.V. Evans, J.M. Brown, J. Worth, Influence of extreme variations in casting parameters and iron & silicon compositions on can-end stock (AA-5182), Light Metals: Proceedings of Sessions, TMS Annual Meeting, Warrendale, Pennsylvania, Febrary 12-16, (1995) 1127–1135.
  5. Z.Q. Cao, X.G. Zhang, J.Z. Jin, F. Jia, H. Hao, Microstructure and mechanical properties of aluminum alloy 5182 ingot cast by electromagnetic casting. Mater. Sci. Tech 10(2002) 242–246.
  6. S. Nagasaki, M. Hirabayashi, Binary Alloy Phase-Diagrams, Agne Gijutsu Center, Co. Lit, Tokyo, 2002.
  7. W.H.M Alsem, P.C van Wiggen,. M. Vader, Combined effect of grain refinement and modification in aluminum alloys, Light Metals: Proceedings of the 121st TMS Annual Meeting, Minerals, Met. Mater. Soc. March 1-5, (1992) 821–829.
  8. Z Yang, J.W. Bae, C.G. Kang, Effect of vertical electromagnetic stirring on the grain refinement of A356 aluminum alloy inoculated by Al-5Ti-B, Diffusion and Defect Data, Solid State Phenomena: B. 116–117(2006) 344–349. [CrossRef]
  9. P. Moldovan, G. Popescu, M. Cuhutencu, The combined effect of modifier and grain refiner AITiBSr master alloy on microstructure and porosity of aluminum alloys, Mater. Sci. Forum. 526(2006) 223–228. [CrossRef]
  10. W.H. Sun, S.R. Zhang, A.Q. Hou, Behaviors of Rare Earths in Aluminum alloys, Weaponry Industry Press, Beijing, 1992.
  11. M. Zhu, Z.G. Jian, L.J. Yao, C.X. Liu, G.C. Yang, Y.H. Zhou, Effect of mischmetal modification treatment on the microstructure, tensile properties, and fracture behavior of Al-7.0%Si-0.3%Mg foundry aluminum alloys, J. Mater. Sci. 46(2011) 2685–2694. [CrossRef]
  12. Y.H. Tsai, C.Y. Chou, S.L. Lee, C.K. Lin, J.C. Lin, S.W. Lim, Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg) aluminum alloys, J. Alloys and Comp. 487(2009) 157–162. [CrossRef]
  13. Z.Y. Jian, B.L. Shang, D.Y. Lu, Influence of lanthanum on the structure and mechanical properties of aluminum-silicon eutectic alloy, J. Chin. Rare Earth Soc. 8(1990) 206–211.
  14. X.W. Yu, C.N. Cao, Z. M. Yao, Application of rare earth metal salts in sealing anodized aluminum alloy, J. Mater. Sci. Lett. 19(2000) 1907–1908. [CrossRef]
  15. D. Hamana, M. Bouchear, M. Betrouche, A. Derafa, N. Y. Rokhmanov, Comparative study of formation and transformation of transition phases in Al–12 wt.% Mg alloy, J. Alloys and Comp. 320(2001) 93–102. [CrossRef]
  16. M. Bouchear, D. Hamana, T. Laoui. GP zones and precipitate morphology in aged Al-Mg alloys, Phil. Mag. A. 73 (1996) 1733–1740. [CrossRef]
  17. R. Nozato, S. Ishihara, Calorimetric study of precipitation process in Al-Mg alloys, Jpn. Inst. Met. 21 (1980) 580–588. [CrossRef]