Open Access
MATEC Web Conf.
Volume 66, 2016
The 4th International Building Control Conference 2016 (IBCC 2016)
Article Number 00089
Number of page(s) 9
Published online 13 July 2016
  1. H. Hens. IEA Annex 14: Condensation and Energy. J. Bldg. Phys. 15:261–73 (1992)
  2. H.B. Awbi. Ventilation of buildings. 2nd ed. London ; New York: Taylor & Francis; (2003)
  3. H.S. Hens. Building Physics-Heat, Air and Moisture: Fundamentals and Engineering Methods with Examples and Exercises: John Wiley & Sons; (2012)
  4. R. Galvin. Solving mould and condensation problems: A dehumidifier trial in a suburban house in Britain. Energ. Buildings. 42:2118–23 (2010) [CrossRef]
  5. K. Çomakli, B. Yüksel. Optimum insulation thickness of external walls for energy saving. Appl. Therm. Eng. 23:473–9 (2003) [CrossRef]
  6. M. Boji, M. Mileti, L.a. Boji. Optimization of thermal insulation to achieve energy savings in low energy house (refurbishment). Energ. Convers. Manage. 84:681–90 (2014) [CrossRef]
  7. P. Johansson. Assessment of the Risk for Mold Growth in a Wall Retrofitted with Vacuum Insulation Panels. Paper presented at the Proceedings of the 9th Nordic Symposium on Building Physics, Tampere, Finland. (2011)
  8. J.M. Van Loo, C.A. Robbins, L. Swenson, B.J. Kelman. Growth of mold on fiberglass insulation building materials--a review of the literature. J. Occup. Env. Hyg. 1:349–54 (2004) [CrossRef]
  9. BSI. BS EN ISO7730:2005 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. Edition ed.: BSI Standards Limited; (2005)
  10. ASHRAE. ANSI/ASHRAE standard 55-2010: thermal environmental conditions for human occupancy: American Society of Heating, Refrigerating and Air-Conditioning Engineers Inc, (2010)
  11. BSI. BS EN 15026:2007 Hygrothermal performance of building components and building elements — Assessment of moisture transfer by numerical simulation. Edition ed.: BSI Standards Limited; (2007)
  12. ASHRAE. ANSI/ASHRAE Standard 160-2009: Criteria for Moisture-Control Design Analysis in Buildings. Edition ed.: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.; (2009)
  13. BSI. BS EN ISO 13788:2012 — Hygrothermal performance of building components and building elements — Internal surface temperature to avoid critical surface humidity and interstitial condensation — Calculation methods. Edition ed.: BSI Standards Limited; (2012)
  14. J.K. Calautit, B.R. Hughes. Measurement and prediction of the indoor airflow in a room ventilated with a commercial wind tower. Energ. Buildings. 84:367–77 (2014) [CrossRef]
  15. Y. Wang, Z. Fu-Yun, J. Kuckelkorn, D. Liu, J. Liu, Z. Jun-Liang. Classroom energy efficiency and air environment with displacement natural ventilation in a passive public school building. Energ. Buildings. 70:258–70 (2014) [CrossRef]
  16. L.C. Haw, O. Saadatian, M.Y. Sulaiman, S. Mat, K. Sopian. Empirical study of a wind-induced natural ventilation tower under hot and humid climatic conditions. Energ. Buildings. 52:28–38 (2012) [CrossRef]
  17. X. Lü. Modelling of heat and moisture transfer in buildings: II. Applications to indoor thermal and moisture control. Energ. Buildings. 34:1045–54 (2002) [CrossRef]
  18. H.J. Moon, S.H. Ryu, J.T. Kim. The effect of moisture transportation on energy efficiency and IAQ in residential buildings. Energ. Buildings. 75:439–46 (2014) [CrossRef]
  19. Y. Wang, Y. Liu, D. Wang, J. Liu. Effect of the night ventilation rate on the indoor environment and air-conditioning load while considering wall inner surface moisture transfer. Energ. Buildings. 80:366–74 (2014) [CrossRef]
  20. M.B. Özdeniz, P. Hançer. Suitable roof constructions for warm climates - Gazimǎusa case. Energ. Buildings. 37:643–9 (2005) [CrossRef]
  21. D.I. Kolaitis, E. Malliotakis, D.A. Kontogeorgos, I. Mandilaras, D.I. Katsourinis, M.A. Founti. Comparative assessment of internal and external thermal insulation systems for energy efficient retrofitting of residential buildings. Energ. Buildings. 64:123–31 (2013) [CrossRef]
  22. BSI. BS 5250-Code of Practice for Control of Condensation in Buildings. Edition ed.: BSI Standards Limited; (2011)
  23. P.W. Francisco, W.B. Rose. Temperature and Humidity Measurements in 71 Homes Participating in an IAQ Improvement Program. ASHRAE. (2010)
  24. W.B. Rose, P.W. Francisco. Field Evaluation of the Moisture Balance Technique to Characterize Indoor Wetness. In: Proceeding of Performance of Exterior Envelopes of Whole Buildings VIII: Integration of Building Envelopes IX conference, Florida. (2004)
  25. CIBSE Moisture transfer and condensation. In: K. Butcher, editor. CIBSE Guide A: Environmental design. 7th ed. London: The Chartered Institution of Building Services Engineers; p. 7–1–7–16 (2015)
  26. J.M. Delgado, E. Barreira, N.M. Ramos, V.P. De Freitas. Hygrothermal Numerical Simulation Tools Applied to Building Physics: Springer; (2013) [CrossRef]
  27. S. Cerolini, M. D’Orazio, C. Di Perna, A. Stazi. Moisture buffering capacity of highly absorbing materials. Energ. Buildings. 41:164–8 (2009) [CrossRef]
  28. M. Ibrahim, E. Wurtz, P.H. Biwole, P. Achard, H. Sallee. Hygrothermal performance of exterior walls covered with aerogel-based insulating rendering. Energ. Buildings. 84:241–51 (2014) [CrossRef]
  29. I.A. Bamgbopa. Assessment of Moulds Growth in Hospitals Indoor Environment: HVAC System Aspect. Unpublished Msc Thesis: International Islamic University, Malaysia; (2008)
  30. JKR. Guidelines on the prevention of mould growth in buildings. JKR Malaysia; 2009.
  31. A.N.S. Wahab, M.F. Khamidi, M.R. Ismail. An Investigation of Mould Growth in Tropical Climate Buildings. Paper presented at the Business Engineering and Industrial Applications Colloquium (BEIAC). (2013)
  32. M. Ali, M.O. Oladokun, S.B. Osman, N. Samsuddin, H.A. Hamzah, M.N. Salleh. Ventilation Performance Assessment of an Educational Building in a Hot and Humid Climate. In: InCIEC 2014: International Civil Engineering and Infrastructure Engineering Conference, Kota Kinabalu, Sabah, Malaysia. (2014)
  33. A. Shanmuga Sundaram, A. Bhaskaran. Optimum insulation thickness of walls for energy-saving in hot regions of India. Int. J. Sust. Energ. 33:213–26 (2014) [CrossRef]
  34. E. Vereecken, L. Van Gelder, H. Janssen, S. Roels. Interior insulation for wall retrofitting - A probabilistic analysis of energy savings and hygrothermal risks. Energ. Buildings. 89:231–44 (2015) [CrossRef]
  35. M. Ali, M.O. Oladokun, S.B. Osman, A.M. Shamzani, I. Mohd Sharifuddin, Y. Faridah. Hygrothermal Performance of Tropical Climate Building Envelopes under Operative Conditions: Condensation and Mould Growth Risk Appraisal. In: International Conference on Science, Engineering, Built Environment and Social Science (ICSEBS-2015), Malang & Surabaya, Indonesia. (2015)
  36. M. Ali, M.O. Oladokun, S.B. Osman, N. Samsuddin, H.A. Hamzah. CFD Investigation of Indoor Hygrothermal and Airflow Profile in Academic Research Storage Room: Effect of LMA on Thermohygric Balance and Mould Growth. Paper presented at the The International Conference on Computational Fluid Dynamics in Research and Industry (CFDRI 2015), Kuala Lumpur, Malaysia. (2015)
  37. M.O. Oladokun, M. Ali, S.B. Osman, N. Samsuddin, H.A. Hamzah. CFD Investigation of Indoor Hygrothermal and Airflow Profile in Academic Research Storage Room: Measurement and Validation. Paper presented at the The International Conference on Computational Fluid Dynamics in Research and Industry 2015 (CFDRI 2015), Kuala Lumpur, Malaysia. (2015)
  38. M.O. Oladokun, M. Ali, S.B. Osman, S. Niza, H. Hairul Aini. Indoor Microbial Growth Prediction Using Coupled Computational Fluid Dynamics and Microbial Growth Models. Paper presented at the The 13th Asia Pacific Conference on the Built Environment, Kowloon, Hong Kong. (2015)
  39. P.M. Leardini, T. van Raamsdonk. Design for airtightness and moisture control in New Zealand housing. In: New Zealand Sustainable Building Conference. (2010)
  40. H. Hens. Mold in dwellings: field studies in a moderate climate. In: Proceedings of the 24th AIVC Conference and BETEC Conference, Ventilation, Humidity Control and Energy. (2003)
  41. Standards Malaysia. MS 1525:2014 Energy Efficiency and use of Renewable Energy for Non-Residential Buildings - Code of Practice (Second Revision). Edition ed. Putrajaya Malaysia: Department of Standards Malaysia; (2014)
  42. A. Magrini (Ed.). Building Refurbishment for Energy Performance: A Global Approach: Springer Science & Business Media (2014) [CrossRef]
  43. M.O. Oladokun. Mould Growth Prediction in Tropical Climate Buildings by Hygrothermal Differentials [Dissertation]. Unpublished: International Islamic University Malaysia; (2015)
  44. C. Sekhar. Thermal Comfort in Air‐conditioned Buildings in Hot and Humid Climates – why are we not getting it right? Indoor Air. (2015)