Open Access
MATEC Web of Conferences
Volume 61, 2016
The International Seminar on Applied Physics, Optoelectronics and Photonics (APOP 2016)
Article Number 05003
Number of page(s) 8
Section Chapter 5 Materials Science
Published online 28 June 2016
  1. Ali Davoodi, Mechanistic studies of localized corrosion of Al alloys by high resolution in-situ and ex-situ probing techniques, Ph.D Thesis, Royal Institute of Technology, Stockholm, Sweden, 2007: p.1.
  2. A.C. Scott, R.A. Woods, J.F. Harris, Accelerated corrosion test methods for evaluating external corrosion resistance of vacuumed brazed aluminum heat exchangers, in: Conference Proceedings of SAE International Congress, SAE, Warrendale, USA, 1991.
  3. Y. Isobe, K. Takeuchi, M. Tanaka, M. Mori, S. Yamauchi, K. Namba, Development of corrosion resistant brazing sheet for drawn cup type evaporators part 2: Application to evaporator, in: SAE: Conference Proceedings of SAE International Congress, SAE, Warrendale, USA, 1993.
  4. F.M. Al-Kharafi, W.A. Badawy, Corrosion and passivation of al and al-si alloys in nitric acid solutions: 2 - effect of chloride ions, Electrochimica Acta 40 (1995) 1811. [CrossRef]
  5. S.S. Abdel Rehim, H.H. Hassan, M.A. Amin, Chronoamperometric studies of pitting corrosion of Al and (Al-Si) alloys by halide ions in neutral sulphate solutions, Corrosion Science 46 (2004) 1921. [CrossRef]
  6. S. Kuroda, K. Tohma, Aluminum alloys, in: Conference Proceedings of ICAA6, Japan Institute of Light Metals, Toyohashi, Japan, 1998, p.1543.
  7. S. Meijers, Corrosion of aluminum brazing sheet, Ph.D. Thesis, TU Delft, 2002, ISBN: 90-805661-3-6.
  8. S. Tierce, N. Pebere, C. Blanc, C. Casenave, G. Mankowski, H. Robidou, Corrosion behavior of brazing material AA4343, Electrochim. Acta 52 (2006) 1092–1100. [CrossRef]
  9. Y.J. Li, L. Arnberg, Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization, Acta Materialia 51 (2003): 3415–3428.
  10. F. Norouzi Afshar, J.H.W. de Wit, H. Terryn, J.M.C. Mol, Scanning Kelvin probe force microscopy as a means of predicting the electrochemical characteristics of the surface of a modified AA4xxx/AA3xxx(Al alloys) brazing sheet, Electrochimica Acta 88 (2013): 330–339. [CrossRef]
  11. S.Tierce, N. Pébère,, Corrosion behavior of brazed multilayer material AA4343/AA3003/AA4343: Influence of coolant parameters, Corrosion Science 49 (2007) 4581–4593. [CrossRef]
  12. F. Norouzi Afshar, J.H.W. de Wit, H. Terryn, J.M.C. Mol, The effect of brazing process on microstructure evolution and corrosion performance of a modified AA4XXX/AA3XXX brazing sheet, Corrosion Science, 58 (2012) 242–250. [CrossRef]
  13. G.J. MARSHALL, Microstructural Control in an Aluminum Core Alloy for Brazing Sheet Applications, METALLURGICAL TRANSACTIONS A, 24A (1993): 1935–1942. [CrossRef]
  14. J. Lacaze, S. Tierce, M.C. Lafont, Y. Thebault, N. Pebere, G. Mankowski, C. Blanc, H. Robidou, D. Vaumousse, D. Daloz, Study of the microstructure resulting from brazed aluminum materials used in heat exchangers, Mater. Sci. Eng., A 414 (2005): 317–321. [CrossRef]
  15. ASTM Standard, Designation G85, Standard Practice for Modified Salt Spray(Fog) Testing, 2006.
  16. D.T.L. Alexandre, A.L. Greer, Acta Mater. 50 A.L. Greer, Acta Mater. 50 (2002):2571.
  17. N. Birbilis, R. G. Buchheit, Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys: An Experimental Survey and Discussion, Journal of The Electrochemical Society, 2005,152 (4): B140–B151. [CrossRef]