Open Access
MATEC Web of Conferences
Volume 31, 2015
2015 7th International Conference on Mechanical and Electronics Engineering (ICMEE 2015)
Article Number 17001
Number of page(s) 5
Section Computer network and communication system
Published online 23 November 2015
  1. Buyya R, Yeo C S, Venugopal S, et al. Cloud computing and emerging IT platforms: Vision, hype, and reality for delivering computing as the 5th utility[J]. Future Generation computer systems, 2009, 25(6): 599–616. [CrossRef]
  2. Li B H, Zhang L, Ren L, et al. Further discussion on cloud manufacturing[J]. Computer Integrated Manufacturing Systems, 2011, 17(3): 449–a457(in Chinese).
  3. Ren L, Zhang L, Zhang Y B, et al. Resource virtualization in cloud manufacturing[J]. Computer Integrated Manufacturing Systems, 2011, 17(3): 511–518(in Chinese).
  4. Zhou Z, Liu Q, Xu W. From digital manufacturing to cloud manufacturing[J]. Int J Eng Innov Manag, 2011, 1(1): 1–14.
  5. Wood K, Brown T, Rogowski R, et al. Fiber optic sensors for health monitoring of morphing airframes: I. Bragg grating strain and temperature sensor[J]. Smart Materials and structures, 2000, 9(2): 163. [CrossRef]
  6. Gubbi J, Buyya R, Marusic S, et al. Internet of Things (IoT): A vision, architectural elements, and future directions[J]. Future Generation Computer Systems, 2013, 29(7): 1645–1660. [CrossRef]
  7. Atzori L, Iera A, Morabito G. The internet of things: A survey[J]. Computer networks, 2010, 54(15): 2787–2805. [CrossRef]
  8. Wang Xiaoyan. The research on the cooperation technology of the wireless heterogeneous network[D]. Wuhan Huangzhong University of Science and Technology, 2006(in Chinese).
  9. Zhang L, Luo Y L, Tao F, et al. Key technologies for the construction of manufacturing cloud[J]. Computer Integrated Manufacturing Systems, 2010, 16(11): 2510–2520(in Chinese).
  10. Singh S, Choi K, Kodali A, et al. Dynamic fusion of classifiers for fault diagnosis[C]//SMC. 2007: 2467–2472.
  11. Tao F, Hu Y, Zhao D, et al. Study on manufacturing grid resource service QoS modeling and evaluation[J]. The International Journal of Advanced Manufacturing Technology, 2009, 41(9-10): 1034–1042. [CrossRef]