Open Access
MATEC Web of Conferences
Volume 29, 2015
Testing and Modeling Ceramic & Carbon Matrix Composites
Article Number 00012
Number of page(s) 15
Published online 02 November 2015
  1. F. Breede, R. Jemmali, D. Koch, Design and testing of a C/C-SiC nozzle extension manufactured via filament winding technique and liquid silicon infiltration, 10th PACRIM, June 2013, San Diego, USA
  2. S. Hofmann, Effect of interlaminar defects on the mechanical behaviour of fibre reinforced silicon carbide, Dissertation, University Stuttgart, 2013
  3. S. Hofmann, B. Öztürk, D. Koch, H. Voggenreiter, Experimental and numerical evaluation of bending and tensile behaviour of carbon fibre reinforced SiC, Composites: Part A, 43 (2012), pp. 1877–1885 [CrossRef]
  4. B. Heidenreich, Manufacturing of CMC by Liquid Silicon Infiltration (LSI), Wiley-VCH, Ed. Krenkel, Keramische Verbundwerkstoffe, (2002), ISBN 3-527-30529-7, pp. 48–75
  5. R. Kochendörfer, H. Hald, W. Krenkel, Design guide lines for CMC-structures, Wiley-VCH, Ed. Krenkel, Keramische Verbundwerkstoffe, (2002), ISBN 3-527-30529-7, pp. 149–172
  6. AITM, Airbus Standard 1.0006, Issue 2, 1994, 1–8
  7. A. Fink, Ein Grenzflächenmodell zur Beschreibung des mechanischen Verhaltens faserverstärkter Keramiken, Dissertation, Uni Stuttgart, 1995
  8. B. Marshall and A.G. Evans, Failure mechanisms in ceramic fiber/ceramic matrix composites, J. Am. Ceram. Soc., 68 (5) (1985), pp. 225–231 [CrossRef]
  9. F. Hild, J.M. Domergue, F.A. Leckie, A.G. Evans, Tensile and flexural ultimate strength of fibre reinforced ceramic matrix composites, Int. J. Solids Structures, 31 (7) (1994), pp. 1035–1045 [CrossRef]
  10. J. Nakayama, Direct measurement of fracture energies of brittle heterogeneous materials, J. Am. Cer. Soc., 48 (11) (1994), pp. 221–229
  11. A. Szekrényes, Overview on the experimental investigations of the fracture toughness in composite materials, HEJ – Mechanical Engineering and Transport Section, (2002),
  12. O. Allix, P. Ladeveze, A. Corigliano. Damage analysis of interlaminar fracture specimens, Composite Structures, 31 (1995), pp. 61–74 [CrossRef]
  13. ANSYS Inc., Release 12.1. Documentation for ANSYS (2009)
  14. R. Hill, The mathematical theory of plasticity, Oxford, Clarendon Press (1950)
  15. C.F. Shih, D. Lee, Further developments in anisotropic plasticity, Journal of Engineering Materials and Technology, 100 (1978), pp. 294–301 [CrossRef]
  16. S. Valliappan, P. Boonlauloh, I.K. Lee Non-linear analysis for anisotropic materials, International Journal for Numerical Methods in Engineering, 10 (3) (1976), pp. 597–606 [CrossRef]
  17. J.R. Rice, A path independent integral and the approximate analysis of strain concentration by notches and cracks, Journal of Applied Mechanics, 35 (1968), pp. 379–386 [CrossRef]
  18. A.A. Griffith, The phenomena of rupture and flow in solids, Philosophical Transaction of the Royal Society, London, Series A, 221 (1921)
  19. D. Dugdale, Yielding of steel sheets containing slits, Journal of the mechanics and Physics of Solids, 8 (1960) [CrossRef]
  20. G.I. Barenblatt, Mathematical theory of equilibrium cracks in brittle fracture, Advances in Applied Mechanics, Academic Press, 7 (1962)
  21. W. Krenkel, Ceramic light weight breaks, Wiley-VCH, Ed. Krenkel, Keramische Verbundwerkstoffe, (2002), ISBN 3-527-30529-7, pp. 242-267
  22. H. Tada, P.C. Paris, G.R. Irwin, The stress analysis of cracks handbook, 3rd Ed, ASME Press, 2000, pp. 58