Open Access
MATEC Web of Conferences
Volume 26, 2015
2015 3rd Asia Conference on Mechanical and Materials Engineering (ACMME 2015)
Article Number 02001
Number of page(s) 5
Section Material processing and preparation technology
Published online 12 October 2015
  1. K. Kitazono, A. Kitajima, E. Sato, Solid-state diffusion bonding of closed-cell aluminum foams, Mat. Sci. Eng. A. 327 (2002) 128–132. [CrossRef]
  2. G. Liu, L.E. Murr, C. Niou, J.C. McClure, F.R. Vega, Microstructural aspects of the friction stir welding of 6061-T6 aluminum, Scripta Mater. 37 (1997) 355–361. [CrossRef]
  3. K. Boonseng, C. Meengam, S. Chainarong, P. Muangjunburee, Microstructure and Hardness of Friction Welded SSM 356 Aluminium Alloy, AMR. 887-888 (2014) 1273–1279. [CrossRef]
  4. A.S. Zuruzi, H. Li, G. Dong, Effects of surface roughness on the diffusion bonding of Al alloy 6061 in air, Mat. Sci. Eng. A. 270 (1999) 244–248. [CrossRef]
  5. S. Benavides, Y. Li, L.E. Murr, D. Brown, J.C. McClure, Low temperature Friction Stir welding of 2024 aluminum, Scripta Mater. 41 (8) (1999) 809–815. [CrossRef]
  6. Y.W. Horng, L. Shyong W. JianYih, Solid-state bonding of iron-based alloys, steel–brass andaluminum alloys, J. Mater. Process. Technol. 75 (1998) 173–179. [CrossRef]
  7. E.P. Box, R. George Norman and R. Draper, Empirical Model-Building and Response Surface , John Wiley and Sons, New York, 1987.
  8. H. Myers, Raymond, Response Surface Methodology, Edwards Brothers, USA, 1976.
  9. D.C. Montgomery, Designing and analysis of experiments, 5th ed., John Wiley &Sons Inc. New York, 2000.
  10. D.C. Montgomery, G.C. Runger, N.F. Hubele, Engineering statistics. 4th ed., John Wiley & Sons Inc. New York, 2000.
  11. M.J. Fernandus, T. Senthikumar, V. Balasubramanian, S. Rajakumar, Optimising diffusion bonding parameters to maximize the strength of AA6061 aluminium and AZ31B magnesium alloy joints, Mater. Design. 33 (2012) 31–41. [CrossRef]
  12. G. Elatharasan, V.S. Kumar, An experimental analysis and optimization of process parameter on friction stir welding of AA 6061-T6 aluminum alloy using RSM, Procedia Eng. 64 (2013) 1227–1234. [CrossRef]
  13. N. Kiaee, M. Aghaie-Khafri, Optimization of gas tungsten arc welding process by response surface, Mater. Design. 54 (2014) 25–31. [CrossRef]
  14. J. Wannasin, S. Junudom, T. Rattanochaikul, M.C. Flemings, Development of the Gas Induced Semi-Solid Metal Process for Aluminum Die Casting Applications, SSP. 141 (2008) 97–102. [CrossRef]
  15. C.S. Lee, H. Li, R.S. Chandel, Vacuum-free diffusion bonding of aluminium metal matrix composite, J. Mater. Process. Technol. 89-90 (1999) 326–330. [CrossRef]
  16. A.M. Hassan, O.M. Bataineh and K.M. Abed, The effect of time and temperature on the precipitation behavior and hardness of Al–4wt % Cu alloy using design of experiments, J. Mater. Process. Technol. 204 (2008)342–349. [CrossRef]