Open Access
MATEC Web of Conferences
Volume 15, 2014
Building Surveying, Facilities Management and Engineering Conference (BSFMEC 2014)
Article Number 01039
Number of page(s) 9
Published online 19 August 2014
  1. Golestaneh, M., Amini, G., Najafpour, G.D., Beygi, M.A., 2010. Evaluation of Mechanical Strength of Epoxy Polymer Concrete with Silica Powder as Filler, World Applied Sciences Journal, 9(2): 216–220
  2. Pitaloka, A.B., H.S. Asep, M. Nasikin, 2013. Water Hyacinth for Superabsorbent Polymer Material, World Applied Sciences Journal, 22(5): 747–754
  3. Gorninski, J.P., D.C. Dal Molin and C.S. Kazmierczak, 2007. Strength degradation of polymer concrete in acidic environments, Cement and Concrete Composites, 29(8): 637–645 [CrossRef]
  4. Muthukumar, M. and D. Mohan, 2005. Studies on Furan Polymer Concrete, J. Polymer Res., 12: 231–241 [CrossRef]
  5. Ribeiro, M.C.S., P.R. Nóvoa, A.J.M. Ferreira and A.T. Marques, 2004. Flexural performance of polyester and epoxy polymer mortars under severe thermal conditions, Cement and Concrete Composites 26(7): 803–809. [CrossRef]
  6. Ohama, Y., 1998. Polymer-based admixtures, Cement and Concrete Composites, 20 (2-3): 189–212. [CrossRef]
  7. Mebarkia, S. and C. Vipulanandan, 1995. Mechanical properties and water diffusion in polyester polymer concrete, J. Engineering Mechanics, 121(12): 1359–1365. [CrossRef]
  8. Vipulanandan, C. and E. Paul, 1993. Characterization of polyester polymer and polymer concrete, J. Materials in Civil Engineering, 5(1): 62–82. [CrossRef]
  9. Vipulanandan, C. and N. Dharmarajan, 1987. Flexural behavior of polyester polymer concrete, Cement and Concrete Res., 17(2): 219–230.
  10. Czarnecki, L., A. Garbacz and J. Kurach, On the characterization of polymer concrete fracture surface, Cement and Concrete Composites, 23 (4-5): 399–409 [CrossRef]
  11. Othuman Mydin, M.A., 2013. Modeling of Transient Heat Transfer in Foamed Concrete Slab. Journal of Engineering Science and Technology, 8(3): 331–349
  12. Othuman Mydin, M.A., Y.C. Wang, 2012. Mechanical properties of foamed concrete exposed to high temperatures. Journal of Construction and Building Materials, 26(1): 638–654 [CrossRef]
  13. Othuman Mydin, M.A., Y.C. Wang, 2011. Elevated-Temperature Thermal Properties of Lightweight Foamed Concrete. Journal of Construction & Building Materials, 25(2): 705–716 [CrossRef]
  14. Othuman Mydin, M.A., 2011. Thin-walled steel enclosed lightweight foamed concrete: A novel approach to fabricate sandwich composite. Australian Journal of Basic and Applied Sciences, 5(12): 1727–1733
  15. Norgaard, J., M.A. Othuman Mydin, 2013. Drywall Thermal Properties Exposed to High Temperatures and Fire Condition. Jurnal Teknologi, 62(1): 63–68
  16. Othuman Mydin, M.A., 2013. An Experimental Investigation on Thermal Conductivity of Lightweight Foamed concrete for Thermal Insulation. Jurnal Teknologi, 63(1): 43–49 [CrossRef]
  17. Othuman Mydin, M.A., Y.C. Wang, 2011. Structural Performance of Lightweight Steel-Foamed Concrete-Steel Composite Walling System under Compression. Journal of Thin-walled Structures, 49(1): 66–76 [CrossRef]
  18. Soleimanzadeh, S., Othuman Mydin, M.A., 2013. Influence of High Temperatures on Flexural Strength of Foamed Concrete Containing Fly Ash and Polypropylene Fiber, International Journal of Engineering, 26(1): 365–374 [CrossRef]