Open Access
MATEC Web of Conferences
Volume 11, 2014
International Congress on Materials & Structural Stability
Article Number 01041
Number of page(s) 4
Section Materials & Pathologies
Published online 28 April 2014
  1. Ebihara T. (1981) Shear properties of laminatedveneer lumber. Mokuzai Gakkaishi, (27) 11, 788–794
  2. Echols R.M., Currier R.A. (1973) Comparative properties of Douglas-Fir made from Parallel-Laminated Veneers vs Solid Wood. Forest Products Journal, (23) 2, 45–47.
  3. NF B51-008 (1987) Wood. Static bending. Determination of ultimate strength in static bending using small clear specimens”, November 1987, 8 p.
  4. NF B51-016 (1987) Wood. Static bending. Determination of modulus of elasticity in static bending using small clear specimens, December 1987, 8 p.
  5. Hoover W.L., Ringe J.M., Eckelman C.A., Youngquist J.A. (1987a) Material design factors for hardwood laminated-veneer-lumber. Forest Products Journal, (37) 9, 15–23
  6. Kilic Y., Colak N. Baysal E., Burdurlu E. (2006) An investigation of some physical and mechanical properties of laminated veneer lumber manufactured from black alder (Alnus glutinosa) glued with polyvinyl acetate and polyurethane adhesives. Forest Products Journal 56 (9), 56–59
  7. Kunesh R.H. (1978) Micro-Lam: structural Laminated Veneer Lumber. Forest Products Journal, (28) 7, 41–44
  8. Lei Y K. ET Wilson J.B. (1979) Fracture toughness of parallel-laminated veneer. Forest Products Journal, (29) 8, 28–31
  9. Moriizumi, S.; Maeda, N.; Sanada, Y.; Ogura, T. (1984) The strength properties of Japanese larch LVL (I). The wood quality of small Japanese larch logs and the bending strength of clear LVL Journal of the Hokkaido. Forest Products Research Institute 1984 n° 384, 1–7
  10. PaŁubicki B., Marchal R., Butaud J.-C., Denaud L.-E., Bléron L., Collet R., Kowaluk G. (2009). A Method of Lathe Checks Measurement; SMOF device and its software. In press, Wood Science and Technology.
  11. Schaffer E.L., Jokerst R.W., Moody R.C., Peters C.C., Tschernitz J.L. Et Zahn J.J. (1972), Feasibility of producing a high-yield laminated sructural product : General Summary. Research paper FPL n° 175, 18 p.
  12. Thibaut B. (1988) Le processus de coupe du bois par déroulage. These de doctorat d’Etat, University of Montpellier, 386 p.