Open Access
MATEC Web of Conferences
Volume 11, 2014
International Congress on Materials & Structural Stability
Article Number 01037
Number of page(s) 7
Section Materials & Pathologies
Published online 28 April 2014
  1. A. Balsamoa, A. Colombob, G. Manfredic, P. Negrod and A. Protac, “Seismic behavior of a fullscale RC frame repaired using CFRP laminates”, Engineering Structures, Vol. 27, 769–780, (2005). [CrossRef]
  2. S.A. Meftah, A. Tounsi, A. Megueni And E. A. Adda Bedia, “Lateral stiffness and vibration characteristics of RC shear walls with variable fibres spacing”, Materials & Design, Vol. 29, 1955–1964, (2008). [CrossRef]
  3. R. Yeghnem, S.A. Meftah, A. Tounsi and E.A. Adda Bedia,” Earthquake response of RC coupled shear walls strengthened with thin composite plates”, Journal of vibration and control, Vol. 15, 963–985, (2009). [CrossRef]
  4. S. Benyoucef, A. Tounsi, S.A. Meftah and E.A. Adda Bedia, “Approximate analysis of the interfacial stress concentrations in FRP – RC hybrid beams, Composite interfaces, Vol. 13,561–571, (2006). [CrossRef]
  5. H.S. Shen, Y. Chen and J. Yang, “Bending and vibration characteristics of a strengthened plate under various boundary conditions”, Engineering Structures, Vol. 25, 1157–1168, (2003). [CrossRef]
  6. Y. K. Cheung and S. Swaddiwudhipong, “Analysis of frame shear wall structures using finite strip elements”, In Proceedings of the Institution of Civil Engineers, Part 2, 65, September 517–535. (1978).
  7. A.K.H. Kwan, “Local deformations and rotational degrees of freedom at beam-wall joints”, Computer & Structures, Vol. 48, 615–625, (1993). [CrossRef]
  8. EUROCODE 2, Design of concrete structures. Pt 1-1: General Rules and Rules for Buildings. Editorial Group, Brussels (1991).
  9. H. Trost and J. Wolff, “Zur wirklichkeitsnahen ermittlung der beanspruch-ungen in abschnittsweise hergestellten spannbetontragwerken”, Der Bauingenieur, 45, 155–169, (1970). (In German)
  10. T. Kubiak, “Dynamic buckling of thin-walled composite plates with varying widthwise material properties”, Solids & Structures, Vol. 42, 5555–5567, (2005). [CrossRef]
  11. K.J. Bathe and E.L. Wilson, “Numerical Methods in finite element analysis”, Prentice –Hall ISBN 0136271901, 9780136271901, (1976).